Search found 3891 matches

by emu_kidid
Mon Apr 17, 2017 11:20 pm
Forum: Welcome
Topic: hey!!
Replies: 1
Views: 173

Re: hey!!

Welcome, enjoy your stay. GameCube is older than you, now I feel old!
by emu_kidid
Mon Apr 17, 2017 11:19 pm
Forum: Emulators
Topic: 128GB SDXC Won't load?
Replies: 2
Views: 119

Re: 128GB SDXC Won't load?

Hey everyone! I am using a patriot 128gb SDXC micro with Swiss 377. It lists games on what I have on the memory, but when I go to play it, it goes to a black screen after loading 100%. I also formatted the memory card to FAT32 with 32kb sections. What else am I missing? Sent from my BLU STUDIO C SU...
by emu_kidid
Mon Apr 10, 2017 11:53 pm
Forum: Swiss
Topic: Doom? And something else
Replies: 1
Views: 122

Re: Doom? And something else

Check your iso against the SHA-1 from redump.org. I wouldn't put it past Swiss being the cause of the fault at all though.
by emu_kidid
Tue Apr 04, 2017 10:28 pm
Forum: Welcome
Topic: New Here! Obsession w/ Gamecube Visuals
Replies: 1
Views: 113

Re: New Here! Obsession w/ Gamecube Visuals

Welcome to the forum, those are some great games you mentioned, I'm sure many of us here often go back to play them when we can find the time, I know I do ;)
by emu_kidid
Tue Apr 04, 2017 6:32 am
Forum: Modchips
Topic: Qoob Chip
Replies: 150
Views: 28502

Re: Qoob Chip

Like a module-based frontend? I can see giving apps a cohesive look and feel, by plugging them into provided font/interface options. We'd want the defaults not to stray too far from Nintendo's style or it'd be strange. My bootstrap looks for an ipl.dol file on the SD card and loads it, or falls bac...
by emu_kidid
Sun Apr 02, 2017 10:19 pm
Forum: Modchips
Topic: Qoob Chip
Replies: 150
Views: 28502

Re: Qoob Chip

The GCB is just the raw flash image. It's pretty much equivalent to a regular IPL dump, but it contains the Qoob IPL instead. It looks like the updater for the SX might be a little annoying to patch, so I haven't tried anything yet. I also only have a pro so I'll need someone with a backup solution...
by emu_kidid
Sun Apr 02, 2017 10:18 pm
Forum: Support
Topic: Resurfaced gamecube game error
Replies: 1
Views: 94

Re: Resurfaced gamecube game error

Most likely, you would have been better off leaving the deep scratches and attempting to fill them in.
by emu_kidid
Fri Mar 31, 2017 9:13 pm
Forum: Modchips
Topic: Qoob Chip
Replies: 150
Views: 28502

Re: Qoob Chip

Streetwalker wrote:There is none. I'm going to try and make it fit but I can't promise anything.



Take the qoobSX update ELF and replace the GCB in it, easiest way to flash a SX.
by emu_kidid
Wed Mar 29, 2017 4:30 am
Forum: GameCube
Topic: Iso to Gci
Replies: 5
Views: 360

Re: Iso to Gci

They are limited to reading up to a certain offset due to their command design, so please let us know how it's 1GB, we're all keen to know.
by emu_kidid
Tue Mar 28, 2017 12:19 am
Forum: Support
Topic: Swiss multidisc help and also I guess the laser's dead?
Replies: 5
Views: 562

Re: Swiss multidisc help and also I guess the laser's dead?

New laser arrived, it's working with my originals as well as some of my backups with the pot somewhere around 190-200 ohms. I ended up getting some other mini dvd-rs (fujifims that my reader/writer seems to think are ritek, so I guess that's good?) as well, and they seem to work better than the phi...
by emu_kidid
Tue Mar 28, 2017 12:08 am
Forum: Support
Topic: Panasonic Q - DVD No Picture, Only Sound
Replies: 2
Views: 188

Re: Panasonic Q - DVD No Picture, Only Sound

Check to see if the flex cables/etc are all going to the right place from the DVD player board to the huge side board, sounds like the video signal is cut somewhere.
by emu_kidid
Sun Mar 26, 2017 9:54 pm
Forum: Welcome
Topic: I'm new, hello! What did SWIM buy?
Replies: 11
Views: 332

Re: I'm new, hello! What did SWIM buy?

Welcome, so are you saying when the console is turned on it boots to Swiss without a disc in the drive?
by emu_kidid
Tue Mar 21, 2017 8:09 pm
Forum: GC-Linux
Topic: gc-linux kernel build
Replies: 14
Views: 556

Re: gc-linux kernel build

I'm gone for a week and liquitt and gc-Linux come back to life!
by emu_kidid
Wed Mar 08, 2017 9:55 pm
Forum: Support
Topic: Unable to play backups - 1 YEAR ISSUE
Replies: 42
Views: 2470

Re: Unable to play backups - 1 YEAR ISSUE

OK update everyone. I have been trying to get this cube to read backups for over a damn year. Recently I tried my friends laser from his cube. The laser showed the same symptoms I have been experiencing from my original laser and a brand new laser. What will happen is the gamecube will boot the bac...
by emu_kidid
Wed Mar 08, 2017 9:52 pm
Forum: Support
Topic: Xenogc help
Replies: 7
Views: 549

Re: Xenogc help

Just chiming in to say that I recently installed a Xeno myself and had similar issues. I was also forced to resort to the alternate install points to salvage my botched (or so I had thought) operation. However, after close examination, it seems that the orange LED on the new clones are basically re...
by emu_kidid
Wed Mar 08, 2017 4:59 am
Forum: Wii64
Topic: Not64 Second Edition - an Hybrid Heaven emulator
Replies: 261
Views: 120458

Re: Not64 Second Edition - an Hybrid Heaven emulator

Please can you also tell me how is stored the checksum match for Cruis'n World? Don't save with my hacked rom 'cause don't set the correct savetype, do it only with the clean rom that have a different checksum, please can you tell me how change the checksum check in Not64? It's these: { 0x83F3931E,...
by emu_kidid
Tue Mar 07, 2017 5:49 am
Forum: Modchips
Topic: Purchase Wiikey Fusion
Replies: 13
Views: 2038

Re: Purchase Wiikey Fusion

You just reminded me, FlatMii is the one I was thinking of with USB, it's the precursor to the fusion clones. It was USB only - as in you run a program on your computer that streamed over a USB cable into the Wii :P I have a Wasp Fusion setup I might sell, but you're probably better off asking on th...
by emu_kidid
Tue Mar 07, 2017 1:03 am
Forum: Support
Topic: Swiss multidisc help and also I guess the laser's dead?
Replies: 5
Views: 562

Re: Swiss multidisc help and also I guess the laser's dead?

EDIT: so I started up my gamecube this morning and it won't read any discs. They spin up, the laser goes up and down the disc a bit, then it slams to the middle, makes a buzzing sound, and shows the "an error has occurred" message over the splash screen. This happens no matter what disc, ...
by emu_kidid
Tue Mar 07, 2017 12:59 am
Forum: Hardware / Modding
Topic: Is there any kind of drive-replacement for portables that's still available?
Replies: 1
Views: 481

Re: Is there any kind of drive-replacement for portables that's still available?

Hi all, I'm new here and this is my first post. I'm not brand new to making portables, but I did just come back from a 4+ year break. I've been wanting to make myself a portable gamecube so I've been doing a lot of research on the topic. For the most part everything has been going well but I hit a ...
by emu_kidid
Tue Mar 07, 2017 12:56 am
Forum: Wii64
Topic: Not64 Second Edition - an Hybrid Heaven emulator
Replies: 261
Views: 120458

Re: Not64 Second Edition - an Hybrid Heaven emulator

Hello there, I have been playing Banjo Tooie using this wonderful emulator but unfortunately I can't keep playing because to my dismay a particular part of the game causes the emulation to crash. When in Witchyworld, once the jaws have opened to enter the Inferno, the moment Banjo steps through the...
by emu_kidid
Tue Mar 07, 2017 12:54 am
Forum: GameCube
Topic: WASP Fusion works on WII but not GC ?!
Replies: 8
Views: 707

Re: WASP Fusion works on WII but not GC ?!

I did, thanks.

Doesn't sound like it flashed OK, try it from a SD Gecko. Also, damn, how much "stock" of consoles do you have? ;)
by emu_kidid
Mon Mar 06, 2017 4:20 am
Forum: Swiss
Topic: Wind Waker won't start
Replies: 4
Views: 453

Re: Wind Waker won't start

There are recent issues with non SDHC cards in Swiss (2GB or less), I need to look at fixing those if they're broken. You could try the 2GB in AR to load Swiss then swap to the 32GB in Swiss and see how you go.
by emu_kidid
Tue Feb 28, 2017 9:55 pm
Forum: Modchips
Topic: Purchase Wiikey Fusion
Replies: 13
Views: 2038

Re: Purchase Wiikey Fusion

Has anybody heard about FlatMod.com or WASPkey (WASP2?)? I just sumbled uppon other modchips that looks similar to a Wiikey Fusion/WASP. How do I know if they will work for a GC? This page looks extremly fishi but it lists some of said modchips: http://www.traderscity.com/board/productscatalog/wasp...
by emu_kidid
Wed Feb 22, 2017 11:02 am
Forum: Softmods
Topic: Splinter Cell Game Exploit
Replies: 8
Views: 2216

Re: Splinter Cell Game Exploit

Hey, I tried to use this exploit in my GameCube and it just freezes after I select "Can't find this map" and nothing happens. I have formatted my memory card so that the only things on there are gcee.gci and boot.gci (from Swiss) and this is still happening to me on both the GC and Wii. A...

Go to advanced search