Search found 3931 matches

by emu_kidid
Sun Aug 20, 2017 10:24 am
Forum: Homebrew & Utilities
Topic: Game Boy Interface
Replies: 732
Views: 360715

Re: Game Boy Interface

TechniqueSan wrote:I'm very sorry to ask such a silly question, I'm sure it has been answered here before, but the thread is too big at this point to go searching;

Do i needed a modded GC, or just the SD adapter for this to work?


https://gc-forever.com/wiki/index.php?t ... g_Homebrew
by emu_kidid
Thu Aug 17, 2017 10:47 pm
Forum: Modchips
Topic: Megadrive V5 variant??
Replies: 1
Views: 55

Re: Megadrive V5 variant??

The lid and p29 were unnecessary since a solution for 2 disc games (when developed ...) should just seamlessly swap for you.
by emu_kidid
Thu Aug 17, 2017 7:05 am
Forum: Wii64
Topic: Could someone help me about compile not64 source
Replies: 3
Views: 71

Re: Could someone help me about compile not64 source

You're better off just commenting parts until it compiles with off the shelf devkitPPC/libOGC-rice then submit a PR for your translation efforts. Thank you for your answer . I only use the most original source(https://github.com/Extrems/Not64/archive/20161209.zip) and devkitPPC/libOGC . The undefin...
by emu_kidid
Thu Aug 17, 2017 3:04 am
Forum: Wii64
Topic: Could someone help me about compile not64 source
Replies: 3
Views: 71

Re: Could someone help me about compile not64 source

You're better off just commenting parts until it compiles with off the shelf devkitPPC/libOGC-rice then submit a PR for your translation efforts.
by emu_kidid
Wed Aug 16, 2017 10:40 pm
Forum: Swiss
Topic: Slow load time - is it swiss?
Replies: 3
Views: 80

Re: Slow load time - is it swiss?

Also, what version of Swiss? Some SD cards I have take 5 seconds to "initialise", but if I remove the SD card/SD adapter and give it a clean and re-insert it, the next boot time is much faster - it ends up being that the reads have to retry many times.
by emu_kidid
Wed Aug 16, 2017 12:34 pm
Forum: Homebrew & Utilities
Topic: Game Boy Interface
Replies: 732
Views: 360715

Re: Game Boy Interface

Hey quick question. So I recently got the wind waker exploit on the memory card to load up either Swiss, or Gameboy interface individually. Is there a way I can load up swiss first to edit the settings, THEN load up the GBI in the same memory card? Put Swiss as boot.gci on your memory card then put...
by emu_kidid
Wed Aug 16, 2017 2:52 am
Forum: Softmods
Topic: How to load Gc roms and backups
Replies: 6
Views: 177

Re: How to load Gc roms and backups

so I think I need to go out to buy another sd card that I can put roms on and is fast enough to load them ( my other card wasn't fast enough ) what size sd card should I get and should it be a certain kind meaning can it be 64gb or 16gb (keep in mind this is to load roms ). thanks again for respond...
by emu_kidid
Tue Aug 15, 2017 3:51 am
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

The same thing happens on my 2GB non-SDHC card though, I guess that's the point I'm trying to make. Is there a reason why that might be? What information can I get you that might be helpful for you (or myself) to diagnose - if there is any sort of debugging I can enable I would gladly do it, not su...
by emu_kidid
Mon Aug 14, 2017 10:32 pm
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

It worked. Thank you so much. Great! Update: after testing unmounting and then remounting the same SD Card (4GB non-SDHC) it doesn't seem to have any sort of better compatibility, same issues exist. It's those pesky non-standard 4GB SDHC cards, I'm not going to bother trying to support them, they c...
by emu_kidid
Mon Aug 14, 2017 1:02 pm
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

Andross89 wrote:I tested version v0.4r420 and the cheat window did not appear too. Is it possible to implement the option to hide system files in version 387? Thank you.


Try v0.4r422, I actually fixed it this time.
by emu_kidid
Mon Aug 14, 2017 6:44 am
Forum: Softmods
Topic: How to load Gc roms and backups
Replies: 6
Views: 177

Re: How to load Gc roms and backups

benderman64 wrote:so how should my sd card be formated and what should it look like . I downloaded swiss and it has got a lot of different folders is their certain files i can delete /move to make more space. Thanks again for responding so fast :D


FAT32 will do. It doesn't care where things are on the file system.
by emu_kidid
Sun Aug 13, 2017 11:04 pm
Forum: Softmods
Topic: How to load Gc roms and backups
Replies: 6
Views: 177

Re: How to load Gc roms and backups

Get Swiss, it'll let you browse your SD card, I take it you can work it out from there.
by emu_kidid
Sun Aug 13, 2017 11:02 pm
Forum: Welcome
Topic: Good evening !
Replies: 1
Views: 81

Re: Good evening !

Welcome to the forum - there's plenty of great games to play on the GameCube :)

Sounds like you got quite a deal in that lot, nice work.
by emu_kidid
Sat Aug 12, 2017 8:46 am
Forum: Software
Topic: SD Card reader
Replies: 5
Views: 107

Re: SD Card reader

SDLM/Action Replay are limited to 2GB, the readers themselves are capable of loading any SD card and the limitation is entirely in software.
by emu_kidid
Tue Aug 08, 2017 12:27 pm
Forum: GameCube
Topic: The hunt for PAL Revision 1.1 IPL
Replies: 0
Views: 71

The hunt for PAL Revision 1.1 IPL

A few of us are on the lookout for a PAL Revision 1.1 IPL - I'm fairly sure it exists and that I've even had a GameCube with it before but I can't seem to locate said GameCube now :cry: So the next time you boot Swiss please check your GameCube revision by going to the little info icon. If you have ...
by emu_kidid
Tue Aug 08, 2017 9:46 am
Forum: GC-Linux
Topic: gc-linux on Wii: fixing display and SDHC issues
Replies: 30
Views: 527

Re: gc-linux on Wii: fixing display and SDHC issues

Streetwalker wrote:Does the Wii have a proper SD/MMC controller? I thought the slot was hooked up to EXI.


http://wiibrew.org/wiki/Hardware/SD_Host_Controller
by emu_kidid
Tue Aug 08, 2017 4:58 am
Forum: GC-Linux
Topic: gc-linux on Wii: fixing display and SDHC issues
Replies: 30
Views: 527

Re: gc-linux on Wii: fixing display and SDHC issues

does the SDHC driver developed by _Nold_ need to be integrated to fix the above? The driver _Nold_ wrote is for GameCube via SD card connected to one of the memory card slots (EXI), if you want to add that to wii linux, sure, but it's not required as there is a separate SD/SDHC driver for the Wii i...
by emu_kidid
Mon Aug 07, 2017 2:27 am
Forum: Softmods
Topic: Is another Gamecube/Wii REALLY required for setting up an exploit?
Replies: 17
Views: 357

Re: Is another Gamecube/Wii REALLY required for setting up an exploit?

I think we have been spoilt here in Australia with $25 second hand Wii consoles (complete with all cables + wii remote and sometimes a nunchuk).
by emu_kidid
Thu Aug 03, 2017 11:00 pm
Forum: Swiss
Topic: Submit Compatibility Issues Here
Replies: 62
Views: 6433

Re: Submit Compatibility Issues Here

I bought another sd gecko off of ebay but my problem still remains, I've also tried swiss versions 387 and 418 besides the aforementioned 401. Im starting to run out of ideas :( Can you try setting the SD cards to "compatible" (press Z when you're selecting the device) and see how you go,...
by emu_kidid
Tue Aug 01, 2017 6:49 am
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

Any tips or ideas on working with a non-SDHC Card? Thanks! Tell me more about your setup, particularly how you're booting Swiss? I worry that the Action replay/SDML disc inits the SD card and leaves it in some incompatible state, so could you try the following and report back if you're using Action...
by emu_kidid
Mon Jul 31, 2017 10:21 pm
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

Andross89 wrote:I am using version 386 still because the Cheats function does not appear when I press Y. There have been several updates but the problem continues. Any solution?


I haven't noticed, does it just say no cheats found? What device (s) are you using?
by emu_kidid
Mon Jul 31, 2017 2:26 am
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

"Reboot" its just a reboot or it goes to Swiss Menu? Also, this should be on the wiki: "The reboot combination is R+Z+B+D-Pad Down" Reboot is just a hard reboot for now, getting it to load Swiss or a DOL of your choosing will be slightly more difficult and is still a work in pro...
by emu_kidid
Sun Jul 30, 2017 11:20 pm
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 713
Views: 130447

Re: Swiss Nightly Build

Hey everyone, how to do In Game Reset (IGR) with latest r401? I currently use Poke Hack, which loads Swiss from Memory Card (A) and loads its config from SDGeck on (B). I want to try games and homebrew and go back to Swiss instead of doing all the exploit again. Thanks! Love this forum!!! Use r416,...
by emu_kidid
Sat Jul 29, 2017 2:15 am
Forum: GC-Linux
Topic: gc-linux kernel build
Replies: 22
Views: 1235

Re: gc-linux kernel build

Nice! Progress! ...my GC got out of the basement already, it's getting closer, haha It must have the GC legs attachment, be careful it doesn't run away. Seriously though, I'd love to see this up & running, can we get a repo up somewhere where we can all contribute and add support for ide-exi, s...
by emu_kidid
Wed Jul 26, 2017 3:20 am
Forum: Welcome
Topic: Hello everyone! | New here
Replies: 2
Views: 180

Re: Hello everyone! | New here

Welcome to the forum - give Geist and Battalion Wars a try if you haven't already :)

Go to advanced search