Search found 4093 matches

by emu_kidid
Thu Oct 18, 2018 7:52 am
Forum: Hardware / Modding
Topic: [REQ] Delaminated gamecube motherboard images
Replies: 1
Views: 36

Re: [REQ] Delaminated gamecube motherboard images

They're probably on the Wii trimming guide threads (maybe) posted by Ashen and other members a few years ago (2011 or so).
by emu_kidid
Thu Oct 18, 2018 7:49 am
Forum: Research & Development
Topic: Gamecube Service Disc
Replies: 5
Views: 2644

Re: Gamecube Service Disc

GizmoTheGreen wrote:
Tue Oct 16, 2018 6:41 pm
trying to bood with modern Swiss from burned disc it only gives a long list of .dols to load... it can't fins the default?
You should be able to just use the top entry and boot that? Can you post a picture?
by emu_kidid
Fri Oct 12, 2018 11:52 pm
Forum: Support
Topic: Discs getting scratched
Replies: 3
Views: 130

Re: Discs getting scratched

Thanks for answering! That's the weirdest part, I've worked on dozens of gamecube and have never seen anything like it. I even put a disc on the spindle and pushed down hard on the disc edge while manually rotating it. No contact at all. I'm at a loss ... it does play the discs, but puts more and m...
by emu_kidid
Fri Oct 12, 2018 11:50 pm
Forum: Support
Topic: Help to run burned games on my GameCube modded with Xeno
Replies: 6
Views: 176

Re: Help to run burned games on my GameCube modded with Xeno

Update: with the pot 30 ohm, almost all my burned games are being recognized on the menu. When I start them, the laser goes crazy going up and down quickly, and then it stops appearing the error message You'll either need better media or a new laser. If the laser is still happy to read originals th...
by emu_kidid
Sun Oct 07, 2018 12:29 am
Forum: Support
Topic: Discs getting scratched
Replies: 3
Views: 130

Re: Discs getting scratched

The clicking noise might just be the laser moving along the rails to hit the start/end. Can it still read discs?

I'd take the GameCube apart and see if the discs sit evenly on the spindle
by emu_kidid
Fri Oct 05, 2018 2:52 am
Forum: Swiss
Topic: SWISS 451 Luigis Mansion freezes
Replies: 2
Views: 131

Re: SWISS 451 Luigis Mansion freezes

So i just burned a mini DVD with the latest SWISS version and now Luigis Mansion isnt booting past the initial Nintendo logo and sometimes it gives me an eorror tha t says "Failed to setup the file too fragmented?", however, my old SWISS DVD with build 371 loads this same game on this same SD card ...
by emu_kidid
Thu Oct 04, 2018 10:35 am
Forum: Hardware / Modding
Topic: i dont know if my gamecube have a Qoob chip installed
Replies: 2
Views: 125

Re: i dont know if my gamecube have a Qoob chip installed

Hi, recently i bought a gamecube with a Resident Evil modded case with RGB lights in it and i realize that in the back i have a "Qoob" sticker attached, and i dont see any switches or anything in the console that indicates me that if its installed, normal booth too, but the sticker its there, anyon...
by emu_kidid
Thu Sep 20, 2018 1:17 pm
Forum: Support
Topic: Battlebots The Game for Gamecube
Replies: 1
Views: 169

Re: Battlebots The Game for Gamecube

Hello ! I was wondering if anyone has a .iso for the Battlebots Gamecube game by Warthog games, I have looked everywhere but I cant find an ISO for it (probably because the game was cancelled before release) - Thanks, Codad1 :D Unreleased or not, please don't request ISO files here. Try tracking do...
by emu_kidid
Tue Sep 18, 2018 12:46 pm
Forum: Support
Topic: Question: available solutions to load homebrew
Replies: 4
Views: 237

Re: Question: available solutions to load homebrew

Be sure to check the wiki too, it explains all the available methods for booting homebrew
by emu_kidid
Mon Sep 17, 2018 6:15 am
Forum: Support
Topic: Half-Dead Gamecube? Distorted Sound & Greenscreen
Replies: 3
Views: 231

Re: Half-Dead Gamecube? Distorted Sound & Greenscreen

Sounds like the ARAM might be having issues. Ideally try to run a backup of the service disk if nothing looks obviously wrong around the high speed port area
by emu_kidid
Sat Sep 15, 2018 12:19 pm
Forum: Support
Topic: GameCube laser keeps clicking and doesn't read the discs
Replies: 30
Views: 2621

Re: GameCube laser keeps clicking and doesn't read the discs

I bought a new cube and a new laser. I changed the laser and soldered the xeno chip on the new cube. It reads the original discs instantly, but it keeps trying to read the burned discs without success. I started the cube pressing the start button and the Xeno page loaded and worked perfectly. I tri...
by emu_kidid
Sat Sep 15, 2018 11:25 am
Forum: Swiss
Topic: Swiss not working
Replies: 1
Views: 175

Re: Swiss not working

Try removing your swiss.ini from your save device and see if that fixes it. You may have saved a weird video mode for Swiss that the HDMI adaptor doesn't support.
by emu_kidid
Wed Sep 12, 2018 3:10 am
Forum: WiiSX
Topic: New fork of WiiSX - WiiSXR
Replies: 30
Views: 15688

Re: New fork of WiiSX - WiiSXR

DarkVam wrote:
Tue Sep 11, 2018 1:13 am
Any more progress since February?
A little, but not much: https://github.com/emukidid/pcsxgc/commits/master
by emu_kidid
Mon Sep 03, 2018 12:17 pm
Forum: Support
Topic: GameCube iso loading to black screen
Replies: 1
Views: 300

Re: GameCube iso loading to black screen

Yeah, the datel adaptor is trash + you're adding in another level of connection by using a microSD adaptor. Try a different (full size) card + adaptor.
by emu_kidid
Mon Sep 03, 2018 12:13 pm
Forum: Support
Topic: Blank screen on Gamecube but not Wii
Replies: 1
Views: 280

Re: Blank screen on Gamecube but not Wii

Hi! I just purchased an older game - Scooby Doo: Night of 100 Frights - off of ebay, and it seems to not be working on my gamecube. The system boots up just fine, and when I go to the menu it recognizes the game for what it is. However, when I attempt to start the game, all I get is a black screen ...
by emu_kidid
Mon Sep 03, 2018 12:07 pm
Forum: Other Platforms
Topic: Dreamcast owners - post your setup
Replies: 25
Views: 8689

Re: Dreamcast owners - post your setup

GizmoTheGreen wrote:
Mon Aug 20, 2018 12:59 pm
I knew about gdrom emu and vga-adapter/mod, but whats the point of the pico-psu exactly? more stable than stock?
Yes, the gdemu draws more power causing extra heat from the stock PSU. I used to have random reboots with the stock PSU as well and those are now gone too.
by emu_kidid
Mon Sep 03, 2018 3:20 am
Forum: GameCube
Topic: Snes9x GX 4.3.7 for game cube ?
Replies: 16
Views: 1694

Re: Snes9x GX 4.3.7 for game cube ?

Seems like I don't need to make builds anymore unless if they screw up GameCube support again Please do not stop. This version has a serious problem with the sound when it uses the fast forward too much. You would not let that happen... Best version so far: https://github.com/emukidid/snes9xgx/rele...
by emu_kidid
Fri Aug 31, 2018 12:16 pm
Forum: GameCube
Topic: Snes9x GX 4.3.7 for game cube ?
Replies: 16
Views: 1694

Re: Snes9x GX 4.3.7 for game cube ?

Seems like I don't need to make builds anymore unless if they screw up GameCube support again
by emu_kidid
Wed Aug 15, 2018 9:27 am
Forum: Hardware / Modding
Topic: Fixing/Modding Gamecube
Replies: 4
Views: 371

Re: Fixing/Modding Gamecube

Poor GameCube! What voltage does this stuff run on?
by emu_kidid
Tue Aug 14, 2018 11:59 am
Forum: Hardware / Modding
Topic: DVD Drive Emulator Question
Replies: 117
Views: 18441

Re: DVD Drive Emulator Question

Very cool, those load times are super fast!

Send me a merge request too
by emu_kidid
Thu Aug 09, 2018 10:45 pm
Forum: Support
Topic: weird issue with launching WIND WAKER
Replies: 1
Views: 347

Re: weird issue with launching WIND WAKER

So, i burned a copy of the EUR wind waker, but the thing doesn't launch in my gamecube, and initially the disc didn't boot in my wii either which i thought it was a bad disc or something, but when i booted the game without the sd media launcher in my wii it plays with no problem... i also tried to ...
by emu_kidid
Thu Aug 09, 2018 10:42 pm
Forum: GameCube
Topic: the most recomended way to shrink games?
Replies: 13
Views: 677

Re: the most recomended way to shrink games?

If they aren't aligned you'll hear garbage. Programs like fstfix were made to fix this but I believe they bring the ISO back up to full size to achieve the alignment.
by emu_kidid
Tue Aug 07, 2018 11:39 pm
Forum: Hardware / Modding
Topic: Mod Questions ( fan n thermal paste/pad )
Replies: 5
Views: 420

Re: Mod Questions ( fan n thermal paste/pad )

Streetwalker wrote:
Mon Aug 06, 2018 9:25 pm
Don't use thermal paste in the gamecube, the gap between the chips and the heatsink is way too big. You need thermal pads, 1.5 to 2mm thick if I recall correctly.
I've seen it done but yeah, the risk is too great that it won't touch the heatsink or will heat up and puddle out or dry over time.
by emu_kidid
Tue Aug 07, 2018 2:50 am
Forum: GameCube
Topic: the most recomended way to shrink games?
Replies: 13
Views: 677

Re: the most recomended way to shrink games?

GCMUtil 0.5 is OK for most things but don't try it on Mario Baseball or any Audio Streaming enabled game.
by emu_kidid
Fri Aug 03, 2018 1:59 am
Forum: General Discussion
Topic: Help Contacting Badass Consoles
Replies: 8
Views: 2010

Re: Help Contacting Badass Consoles

#gc-forever on EFNet.