Search found 1627 matches

by Streetwalker
Sun Jan 20, 2019 5:59 pm
Forum: Hardware / Modding
Topic: EZ-Flash Omega
Replies: 3
Views: 59

Re: EZ-Flash Omega

Nope, nothing of the sort.
by Streetwalker
Sun Jan 20, 2019 10:48 am
Forum: GameCube
Topic: Is it possible to install/run non gci files off of a standard memory card (such as z64) for gamecube ?
Replies: 3
Views: 38

Re: Is it possible to install/run non gci files off of a standard memory card (such as z64) for gamecube ?

Like Extrems said, this isn't supported, mostly because of space constraints. 16MB capacity means that in practice you won't be able to fit 16MB ROMs unless trimmed, which excludes the majority of games. You can get an SD adapter for very cheap, so it was never deemed worth it.
by Streetwalker
Sun Jan 20, 2019 8:42 am
Forum: Hardware / Modding
Topic: EZ-Flash Omega
Replies: 3
Views: 59

Re: EZ-Flash Omega

The Gameboy player is literally a GBA. Unless an accessory depends on the physical form factor of the console, it's compatible.
by Streetwalker
Wed Jan 16, 2019 7:46 am
Forum: Software
Topic: Trying to edit save data project
Replies: 1
Views: 140

Re: Trying to edit save data project

If you have access to homebrew (GC or Wii), you can copy your saves with gcmm.
The actual editing requires knowledge of the save format which isn't always easy to reverse engineer. Many games also have a checksum and reject the save outright if it's broken.
by Streetwalker
Tue Jan 15, 2019 7:52 am
Forum: Wii64
Topic: Not64 Second Edition - an Hybrid Heaven emulator
Replies: 368
Views: 239563

Re: Not64 Second Edition - an Hybrid Heaven emulator

Enough with the whining and baseless accusations. The source code is on GitHub, if anyone wants fork it and continue working on it, feel free to start a new thread.
by Streetwalker
Sun Jan 13, 2019 8:15 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

I don't really plan on doing anything with it though, there are better entry points to work on than the drive's debug connector (IPL replacement, ODE).
by Streetwalker
Sun Jan 13, 2019 4:30 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

It's just a build of iplboot, if it actually works then it should load ipl.dol from your SD card without needing to use a homebrew disc (it does need a disc in the drive to work though).
by Streetwalker
Sun Jan 13, 2019 4:28 pm
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 793
Views: 232496

Re: Swiss Nightly Build

It'd be more helpful for debugging to know the exact version of the game (region, revision if any, ISO checksum is even better).
by Streetwalker
Sun Jan 13, 2019 4:26 pm
Forum: Hardware / Modding
Topic: Wiikey fusion GC's - post your pictures!
Replies: 124
Views: 60634

Re: Wiikey fusion GC's - post your pictures!

I like your WKF build, also nice job with the custom adapters.
by Streetwalker
Sun Jan 13, 2019 4:24 pm
Forum: GameCube
Topic: Where to buy 8cm DVD-R/DVD+R GC-compatible discs these days
Replies: 153
Views: 57505

Re: Where to buy 8cm DVD-R/DVD+R GC-compatible discs these days

yunyan99 wrote:
Sun Jan 13, 2019 11:39 am
www.taobao.com chinese largest Shopping website on line
The problem with taobao is that most people outside of China can't buy from there. It would also be more helpful if you linked to actual listings rather than just mentioning the site.
by Streetwalker
Sun Jan 13, 2019 7:03 am
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 793
Views: 232496

Re: Swiss Nightly Build

Andross89 wrote:
Sat Jan 12, 2019 7:09 pm
Thank you.
I just checked again, video patches shouldn't be enabled by default in 563. Do post your results though.
by Streetwalker
Sat Jan 12, 2019 6:34 pm
Forum: Swiss
Topic: Swiss Nightly Build
Replies: 793
Views: 232496

Re: Swiss Nightly Build

If disabling video patches doesn't help, then it's not that commit.
by Streetwalker
Sat Jan 12, 2019 8:53 am
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

I can't help you much more than this. It should behave exactly the same as a real xenogc, so this is what you get. Do try to adjust your pot, that could help a lot.
I'd recommend just burning a Swiss disc and playing your games off of an SD card.
by Streetwalker
Fri Jan 11, 2019 11:44 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

I'm surprised that build made a difference, it was probably just your wiring that needed some care. If you don't mind, try the previous build again to see if it still works.
by Streetwalker
Fri Jan 11, 2019 11:32 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

I was more interested in the pi side of things, but if it works then that's good. Have fun!
by Streetwalker
Fri Jan 11, 2019 11:31 pm
Forum: GameCube
Topic: Hu-Go! GX unofficial
Replies: 45
Views: 14310

Re: Hu-Go! GX unofficial

The makefile for hu-go wii is there isn't it (I didn't try it)? Try: make -f Makefile.wii Yes, it is present. It throws me this error: https://i.imgur.com/b9cTXE7.jpg Change line 100 of that file to `@make --no-print-directory -C $(BUILD) -f $(CURDIR)/Makefile.wii`. There are other obstacles to mak...
by Streetwalker
Fri Jan 11, 2019 11:13 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

That's actually not supposed to happen because it turns out the pin for the LED is different on models B+ and 2. :P Here's a build with that fixed. I can also confirm that kernel7.img is the file you want to replace with my kernel.img. Also make sure your wires are connected to the right pins on the...
by Streetwalker
Fri Jan 11, 2019 10:42 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

Based on your description, it seems like it's not working. The flashing pattern you're seeing mean the pi is booting something, but you should see one more solid green during the GC boot animation. I've also checked the behavior of an unmodded drive (don't have the pi installed in there anymore) and...
by Streetwalker
Fri Jan 11, 2019 10:04 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

Correct. The rainbow screen is part of the GPU firmware, my code doesn't touch the GPU at all so it's expected that you get either that or no output, I've never bothered to check. If kernel7.img is the only kernel file you have on there then it's the one you want to replace. The other files are most...
by Streetwalker
Fri Jan 11, 2019 5:51 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

Does something happen if you hold start with a legit disc inserted? If so then the xeno is fully working and you probably need a pot adjustment to get backups to read.
by Streetwalker
Fri Jan 11, 2019 3:07 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

No don't touch it, this means it's working. Do legit discs work?
by Streetwalker
Fri Jan 11, 2019 2:46 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

Alright, can you describe exactly what the drive is doing? It's supposed to spin up and stop multiple times while it gets patched. Some times it also speeds up much more than usual. You can also hear a number of clicks. Does the ACT LED on the pi light up?
by Streetwalker
Fri Jan 11, 2019 2:25 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

I've never tried USB power but I think it should be fine. If it's not even reading originals then that means it's doing something. What happens if you hold start?
by Streetwalker
Fri Jan 11, 2019 1:52 pm
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

Fair enough. Here's a build that should work on all rpi2 and 3 models (and will not work on the original model B/B+), keep in mind that it's untested and using a newer compiler so it's not guaranteed to work. Setup is the same.
by Streetwalker
Fri Jan 11, 2019 9:15 am
Forum: Hardware / Modding
Topic: Streetwalrus's first GameCube
Replies: 54
Views: 7531

Re: Streetwalrus's first GameCube

It probably needs a minor change and recompiling because models 2 and 3 have moved the MMIO area. Also keep in mind that this is a terrible solution, you can get a xenogc for very cheap these days.