Search found 172 matches
Re: Viper GC
Ive tried but at the boot it starts the iplbios. Doesnt start swiss. do you think its a problem of microsd? Ive formatted it in FAT 32... Or its a problem of the reader? make sure it's the normal swiss dol (swiss_r1622.dol) renamed to ipl.dol on the root of a fat32 micro sd card plugged into the sd...
Re: Viper GC
Ive tried but at the boot it starts the iplbios. Doesnt start swiss. do you think its a problem of microsd? Ive formatted it in FAT 32... Or its a problem of the reader? make sure it's the normal swiss dol (swiss_r1622.dol) renamed to ipl.dol on the root of a fat32 micro sd card plugged into the sd...
Re: Viper GC
Hi guys. Ive a GAMECUBE with a viper extreme and cobra bios 2.1 in it but i dunno how to flash with success Swiss. Ive tried to make a cobra vgc+swiss dol (the firmware was about 1mb) without success seeing these steps: (Open a DOS prompt. The syntax is “copy /b cobra21.vgc+plugin.cbp output.vgc”. ...
Re: Viper GC
Hi guys. Ive a GAMECUBE with a viper extreme and cobra bios 2.1 in it but i dunno how to flash with success Swiss. Ive tried to make a cobra vgc+swiss dol (the firmware was about 1mb) without success seeing these steps: (Open a DOS prompt. The syntax is “copy /b cobra21.vgc+plugin.cbp output.vgc”. ...
- Wed Mar 27, 2024 2:23 pm
- Forum: GameCube
- Topic: Show off your Cube!
- Replies: 323
- Views: 460853
Re: Show off your Cube!
https://i.imgur.com/n0RgfXnl.jpg https://i.imgur.com/ygSdqpsl.jpg https://i.imgur.com/tatCVPtl.jpg https://i.imgur.com/3FXpwiUl.jpg https://i.imgur.com/oAlVSmVl.jpg https://i.imgur.com/NdryNUgl.jpg https://i.imgur.com/DbXPz8Yl.jpg https://i.imgur.com/ckK0sJal.jpg That's my main gamecube, I have a c...
Re: Viper GC
it was quite tricky given the size but i'm getting 14pin 0.35mm pitch but it looks like 0.5mm would work and that's a standard pitch so i'd try that. without opening the console i'd estimate the cable is about 25cm long. https://i.imgur.com/K00xhBrl.jpg for me in the uk, this seems like it would be ...
Re: Viper GC
i have the full setup, i will replace the battery in my calipers tomorrow and measure the pitch
Re: Viper GC
updated the link to my viper gc iso that contains the bios files, cheats, themes, manuals and software etc.
https://www.gc-forever.com/forums/viewt ... 251#p38251
the iso content can be read and used directly from the cobra bios menu
https://www.gc-forever.com/forums/viewt ... 251#p38251
the iso content can be read and used directly from the cobra bios menu
Re: Viper GC
for anyone who wants to make a jewel for this modchip i made this
the actual png to download below is 3660x3660 with a transparent background.
the actual png to download below is 3660x3660 with a transparent background.
Re: Viper GC
Does anyone know if a Cobra v2.1 ISO exists? I lost my USB adapter for my Viper GC so I have to upgrade via the DVD. I was able to upgrade my BIOS to v1.6 via the DVD but I'm unable to upgrade to v2.1 since it's only a .vgc file. I tried making a ISO9660 but the disc explorer keeps saying unknown f...
- Fri Sep 15, 2017 3:35 am
- Forum: Vintage Nintendo
- Topic: The Legend of Zelda: Ocarina of Time Master Quest For N64
- Replies: 2
- Views: 17281
Re: The Legend of Zelda: Ocarina of Time Master Quest For N64
there showing up perfectly fine for me just click show on spoilers and i also included a download for the images.SyproLives wrote:Can't see the images in the forum man.
- Sat Apr 08, 2017 8:17 pm
- Forum: Homebrew & Utilities
- Topic: Help me Viper GC
- Replies: 1
- Views: 6618
Re: Help me Viper GC
which viper gc is it and can you post images or a vid thanks.
also when you say isos you make what exactly do you mean.
also when you say isos you make what exactly do you mean.
- Sun Mar 19, 2017 6:48 pm
- Forum: Support
- Topic: Xenogc help
- Replies: 8
- Views: 7602
Re: Xenogc help
yeah there all pretty much the same so ebay's fine
- Fri Mar 17, 2017 12:41 am
- Forum: General Discussion
- Topic: How old are you?
- Replies: 96
- Views: 280868
Re: How old are you?
im 32 now, how the time flies
- Fri Mar 17, 2017 12:39 am
- Forum: General Discussion
- Topic: Who else is younger than the Gamecube?
- Replies: 6
- Views: 13620
Re: Who else is younger than the Gamecube?
1985 sorry
- Thu Mar 09, 2017 10:06 pm
- Forum: Vintage Nintendo
- Topic: The Legend of Zelda: Ocarina of Time Master Quest For N64
- Replies: 2
- Views: 17281
The Legend of Zelda: Ocarina of Time Master Quest For N64
Hi guys i bought the legend of zelda ocarina of time master quest n64 cartridge just for fun and thought i would post some images of the board here for anyone who wanted to take a look, If there is anyone else who also bought this and has a different board perhaps you could post images of that too s...
Re: Viper GC
Does anyone know if a Cobra v2.1 ISO exists? I lost my USB adapter for my Viper GC so I have to upgrade via the DVD. I was able to upgrade my BIOS to v1.6 via the DVD but I'm unable to upgrade to v2.1 since it's only a .vgc file. I tried making a ISO9660 but the disc explorer keeps saying unknown f...
- Tue Jun 28, 2016 1:56 pm
- Forum: Support
- Topic: xeno gc problems
- Replies: 6
- Views: 5992
Re: xeno gc problems
i agree, and use flux it looks like your starting to burn the pads or is that flux residue or half and half lol but tbh if this is your first attempt its not bademu_kidid wrote:I'd remove all solder and wire this thing if I were you.
- Mon Jun 27, 2016 9:57 pm
- Forum: Support
- Topic: xeno gc problems
- Replies: 6
- Views: 5992
Re: xeno gc problems
pics please
- Sat Jun 25, 2016 10:49 pm
- Forum: Support
- Topic: Complicated Use Case Xeno/WASP/Megadrivev3?
- Replies: 5
- Views: 5492
Re: Complicated Use Case Xeno/WASP/Megadrivev3?
a megadrive v3 replaces the disc drive so there will be no drive to stick the xenogc too
- Fri Jun 24, 2016 10:40 pm
- Forum: Support
- Topic: Help with Viper Extreme .cod File [Solved]
- Replies: 1
- Views: 3265
Re: Help with Viper Extreme .cod File
figured it out, i also managed to track down this zip file full of .cod code files for cobra so enjoy. Edit: be careful it only seems to allow so many cheats per .cod file so if there are lots you may have to spread them over a few files. Edit 2: actually it may be a limit to how many codes you can ...
- Thu Jun 23, 2016 9:40 am
- Forum: Swiss
- Topic: Swiss Nightly Build
- Replies: 822
- Views: 935957
Re: Swiss Nightly Build
Do you know if anyone has tried to make a custom 3d printed top for you to use a wii drive by any chance?megalomaniac wrote:the wii dvd drive can be used as an optical drive replacement and there are even "drive replacement" modchips
I'm thinking of buying a 3d printer anyway so just curious
- Wed Jun 22, 2016 4:33 pm
- Forum: Support
- Topic: I'm failing with my Xeno installation
- Replies: 6
- Views: 6482
Re: I'm failing with my Xeno installation
the soldering on power looks a little suspect also it looks like ground is connected to the atmega pin
- Wed Jun 22, 2016 11:58 am
- Forum: Hardware / Modding
- Topic: GC USB Memory Adaptor [HKEMS]
- Replies: 2
- Views: 5280
Re: GC USB Memory Adaptor [HKEMS]
http://www.gc-forever.com/forums/download/file.php?mode=view&id=2144&sid=4c26b45f39a22d12a095ff896c7887cb Thought I might start a topic about this thing as it could be relevant to homebrew stuff with the latest .dol -> .gci hacked savegames. That thing acts as a 8MB (64MiB) memorycard for g...
- Wed Jun 22, 2016 5:42 am
- Forum: Support
- Topic: Help with Viper Extreme .cod File [Solved]
- Replies: 1
- Views: 3265
Help with Viper Extreme .cod File [Solved]
hey guys i have been testing codes on my viper extreme all day today and they work through the cheats section so i decided to add them to the disc image as a .cod file since its supported but after i burnt the disc and went to explorer when i clicked the .cod file it said invalid cheat file, does an...