They came from another NTSC-J console and from a PAL console one but I don't remember the exact revisions. The friend who gave me the motherboards said that those 2 died due to voltage problems. The last one I used I don't know why it was dead but a lot of signals were grounded (not by hand). Fortun...

From my understanding it has the same pinout between revisions, so you can swap between different ones.
The broken motherboard with the working ARAM was a DOL-CPU-05 and the repaired one a DOL-CPU-02 both NTSC-J

Unfortunately when you get junk motherboards for free you don't know which part are usable for Shure :mrgreen: Of course, this is the last ARAM I've used (the working one): http://imgur.com/gallery/BsEmySz I don't think that a picture of the broken ones can be helpful but if needed I'll edit my post...

I'm reviving this old post just to say that I came across to another broken Japanese gcn (it doesn't poweron at all even with a working powerboats). I've desoldered the ARAM of this one and installed in the first one that didn't red games and now it's working again (don't know for how many days/moth...

Little update after a lot of time, I've found 2 broken motherboard from a friend and tried to use both ARAM on this GCN but same behaviour as before. Maybe is not the ARAM?

It's certainly not a loss of video unfortunately since I used the same setup as my main gamecube (that is a jap model too). I send the audio directly to my hi-fi, so if it was a not supported video signal the audio should work anyway. When I get a black screen I don't lose the sync it's just a solid...

Hello, Recently I went to Japan, and I've found a pretty cheap untested Gamecube (console + 2 original controllers for 980 yen). Today I powered up the console and it showed a strange behaviour: -it boots fine and it works with composite, rgb, but with component I had some weird colour when in swiss...

Welcome xD

Inviato dal mio Nexus 9 utilizzando Tapatalk

the copy was bad, now it works, thank you

ok, I will check thank you, I'm sure that audio streaming muting was "off".
By the way in theory it may may work as I understood, is not an hw limitation! thank you!

Is exactly what I've done but still no audio streaming with a backup, is it regular?

I've got another question for Megalomaniac:
I've ordered a xenogc, is it dangerous to solder it under the wasp? The megadrive v4 has the wasp exactly in the xenogc's spot. Do I need to make the xenofusion mod or it will work even without?

I've tried with a backup ripped from the original disc
Edit:
Do only retail discs work?

Hello, I'm a proud owner of a megadrive v4 made by the great megalomaniac. Now I'd like to play at some titles that have audio streaming. I know that I can't play them through the SD card, but if I boot one of them from the DVD the audio streaming is still not played.. Do I need to solder the wire i...

megalomaniac wrote:swiss_r281 released

Fantastic!! The bug with the component cable has been solved!!! Thank you very much!!

emu_kidid wrote:Who says it's not in the works..

That would be awesome!

Pa0l0ne it seems that I can't answer to your last pm through GC-Forever I've tried to answer at you from anther forum's pm..

@Pa0l0ne
I've sent you a Pm

I've sent some mails more than a month ago but never got an answer

The psio team said that Dreamcast is the next on their roadmap. But I think they will took a lot of time before releasing something to sell.. This is what one of the developer said: "The PlayStation 1, Dreamcast, SEGA Saturn, 3DO, PC-FX, Atari Jaguar CD, CDi, Sega-CD and Amiga CD32 are on our m...

Is the compatibility improved from the dreamsheel's one?

emu_kidid wrote:We'll need to investigate, might be broken...

ok thank you for your support, I hope it can be fixed

Same results..
Do I need to update Swiss? I've left the version you flashed on wasp

Thank you for your answer, unfortunately I've just tried this solution several times with different joysticks, trying to hold the L trigger at different moments (ex before power on, immediately after power on, after the gamecube logo) and wait with the trigger pressed for about a minute, but every t...

Thank you for your answer! I hope that someone could explain me how to fix this. Does an unmodded component cable used with the regular composit cable can solve this issue? Edit : I've found that if I power on the gc without the digital output o can see the Swiss menu and if I plug the digital out w...