Search found 20 matches

by citrus3000psi
Fri Aug 17, 2018 4:02 pm
Forum: Hardware / Modding
Topic: DVD Drive Emulator Question
Replies: 256
Views: 98357

Re: DVD Drive Emulator Question

I think that is indeed currently the best solution. Especially the one that is soldered right on top of the connector's through-hole pins should be a fairly easy install. It seems that this board has its pinout mirrored though, as it is supposed to connect to the DVD FFC rather than the host FFC? Y...
by citrus3000psi
Fri Aug 17, 2018 3:14 pm
Forum: Hardware / Modding
Topic: DVD Drive Emulator Question
Replies: 256
Views: 98357

Re: DVD Drive Emulator Question

Great work @meneerbeer I've been thinking about this for the last few days. I like the plug in solution, but requires the user to desolder the dvd drive connector. I would at least keep the FFC connector the same. So people with existing mega drive setups etc, can simply just replace their wkf/wasp....
by citrus3000psi
Mon Jun 12, 2017 12:51 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

Hey citrus3000psi, First I'd like to say amazing work on all your projects. I am wanting to do a total gamecube mod using the following boards from https://oshpark.com/profiles/citrus3000psi/page/1 For WiiKey Fusion Gamecube Wasp DVD QSB Gamecube Wasp/WKF Host QSB sdcard_cube for wiikey For HDMI GC...
by citrus3000psi
Wed May 31, 2017 12:43 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

Same result doing that. Edit: Re-flowed the QSB connected to DVD.. tested it connected direct with an FFC cable to the other QSB, and that worked. Bridged the lid switch pins on the QSB, and great success. Not sure if that was the issue all along, or if I actually needed to reflow it. If SD card is...
by citrus3000psi
Thu May 18, 2017 8:06 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

Thank you for your answer. Have you got a tips to solder the WKF Host QSB? I tried, I find it's difficult. I find it easier to tin both the main board and the QSB first. The drag solder up using a very small tip. You the castelations need to be checked and cleaned up if necessary. Oshpark doesn't m...
by citrus3000psi
Tue May 16, 2017 6:40 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

JimmySummer wrote:Hello,

Thank you to share your work.

I have a TPS73633DBVR regulator instead of TPS73633DBVT. Is that also work?
Yes its the same part.
by citrus3000psi
Tue May 09, 2017 6:27 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

Well, my Wiikey Fusion and boards arrived! Just waiting for the extra ribbon cable and the connectors now, can't wait! Just saw that you made a board for the micro SD too, now I want that aswell. lol :lol: I'd like to see a picture of the board after being completed, and how exactly it gets fixed i...
by citrus3000psi
Mon Apr 17, 2017 5:51 pm
Forum: Hardware / Modding
Topic: Mini Guide - How to install megalomaniac's MEGAudio board
Replies: 14
Views: 7554

Re: Mini Guide - How to install megalomaniac's MEGAudio board

opened source. So where are the CAD files? Are you asking for the files or trying to be a dick? Because I originally released this project on assembler and I think I posted the Gerbers there. But since assemblers have been down for 2 months and I made this board about 2 years ago I don't remember. ...
by citrus3000psi
Tue Mar 28, 2017 12:24 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

without creating an account there - can somebody tell me how much these are? and besides that - great job on that citrus! is the microsd board just an extension of the wiikey sd? :) All the boards and parts will be around 20 usd. I'm not sure what you mean by extension, but it replaces the big ugly...
by citrus3000psi
Mon Mar 27, 2017 7:12 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

Never mind, by the picture is a normal ribbon cable and botton contact connector. heheh I'll need another ribbon cable to connect everything right? (the Wiikey comes with one) What's the approximate length of the cable I need to buy? It will take 1-2 months for my wiikey to arrive, and I want to ha...
by citrus3000psi
Wed Feb 15, 2017 3:13 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

I didn't think I'd need to decrypt anything.

The WKF firmware and menu are available for download. I figured I'd just flash the firmware :?: But I guess that different from whats on the FPGA
by citrus3000psi
Tue Feb 14, 2017 10:12 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Re: Custom QSB for Wasp/WKF with DVD drive

Any .5mm pitch 32 pin flex connector will do. Thanks bud! Found them easily on Ebay, and quite cheap too! Next step is finding the Wasp Fusion itself. Tried to find somewhere to buy it but couldn't, it's sold out everywhere! Does anyone know a place that still sells them? I was getting mine from he...
by citrus3000psi
Wed Nov 30, 2016 7:47 pm
Forum: Hardware / Modding
Topic: Cloning the GameCube component cable
Replies: 723
Views: 213315

Re: Cloning the GameCube component cable

How are you shielding your flex cable? Could you show a picture? I don't have a picture currently on me, I'm at work. But I'm using foil tape that is cut in a long strip wrapped around flex cable. I then wrap a layer of kapton around that, so nothing gets shorted on the main board. I looked into ge...
by citrus3000psi
Mon Nov 28, 2016 6:43 pm
Forum: Hardware / Modding
Topic: Cloning the GameCube component cable
Replies: 723
Views: 213315

Re: Cloning the GameCube component cable

The 54 Mhz clock from pin 2 may cause interference, but megalomaniac is pretty knowledgeable and has been developing for quite some time now. On top of that it is a known issue and I believe he said it was due to the manufacturings standard not being up to par...multiple times ao I doubt his design...
by citrus3000psi
Fri Nov 25, 2016 8:28 pm
Forum: Hardware / Modding
Topic: Cloning the GameCube component cable
Replies: 723
Views: 213315

Re: Cloning the GameCube component cable

This is just speculation, but I'm wondering if the flex cable is having interference/rfi issues. I use a flex cable in my design, and I ended up having to shield the cable. Without shielding perfect 480p was sporadic.
by citrus3000psi
Thu Nov 17, 2016 8:22 pm
Forum: Hardware / Modding
Topic: Custom QSB for Wasp/WKF with DVD drive
Replies: 56
Views: 17273

Custom QSB for Wasp/WKF with DVD drive

I have created a couple QSBs to help the ease of install a wasp while retaining dvd + audio stream support. Here are both QSB Installeds. My Wasp has firmware 1.0 so it has autoboot. This is why Pin29 is grounded. The lid switch is currently bridgde so the Wasp thinks the lid is closed. I will event...
by citrus3000psi
Thu Nov 17, 2016 8:17 pm
Forum: Hardware / Modding
Topic: Cloning the GameCube component cable
Replies: 723
Views: 213315

Re: Cloning the GameCube component cable

Here is my design.

Image

Details/OSH Park Links/BOM are on my assembler thread
http://assemblergames.com/l/threads/gam ... ead.63129/
by citrus3000psi
Fri Aug 05, 2016 3:39 pm
Forum: Hardware / Modding
Topic: Program Shuriken Video V3 Please Help!
Replies: 86
Views: 18823

Re: Program Shuriken Video V3 Please Help!

Reinstall the drivers, change USB ports, disable driver signature enforcement sometimes I run into problems as well. Can I ask why you have wires soldered together for the JTAG connectons Ok thank you I will try that and see how it goes. You don't think anything is wrong with the programmer itself ...
by citrus3000psi
Wed Aug 03, 2016 1:09 am
Forum: Hardware / Modding
Topic: Program Shuriken Video V3 Please Help!
Replies: 86
Views: 18823

Re: Program Shuriken Video V3 Please Help!

Bump would anyone be able to help me? I'm going to be trying this soon, but check out the web archive: https://web.archive.org/web/20151222125740/http://www.staffs2.webspace.virginmedia.com/shuriken%20video.htm In there is says this: Programming the shuriken board Xilinx ISE IDE software creates a ...