Search found 12 matches

by sidgallup
Mon Feb 18, 2019 2:19 am
Forum: Swiss
Topic: SWISS wont load SSB Melee
Replies: 7
Views: 876

Re: SWISS wont load SSB Melee

After a few tests, the latest version that runs the game is bulild 366, af=ter that the game hangs after pressing start at the character select screen. When you have compatibility issues, try version 431. And try version 1.02 of Melee. If you are not using ... Tried builds 371,431,466,531 and 599, ...
by sidgallup
Tue Feb 12, 2019 10:09 pm
Forum: Swiss
Topic: SWISS wont load SSB Melee
Replies: 7
Views: 876

Re: SWISS wont load SSB Melee

After a few tests, the latest version that runs the game is bulild 366, af=ter that the game hangs after pressing start at the character select screen.
by sidgallup
Tue Feb 12, 2019 5:19 pm
Forum: Swiss
Topic: SWISS wont load SSB Melee
Replies: 7
Views: 876

Re: SWISS wont load SSB Melee

Try the latest release? Yes i tried build 599, even an older build, downloaded the ISO twice, its a raw ISO file not trimmed, 3 different MicroSD cards, 2 different SD Gecko adapters but still it hangs at the character selection screen forever, im sure ive plyaed this game before with this same set...
by sidgallup
Tue Feb 12, 2019 4:40 am
Forum: Swiss
Topic: SWISS wont load SSB Melee
Replies: 7
Views: 876

SWISS wont load SSB Melee

So im trying to play this game from a Gecko SD Card and it always gets stuck after selecting the characters, i can still hear the music but the game never starts.

Tried with rev. 533 and 451.

Every other game ive tried loads just fine, its a 32gb SDHC class 10.
by sidgallup
Sat Dec 29, 2018 10:09 pm
Forum: Support
Topic: SWISS fails to save config
Replies: 3
Views: 679

Re: SWISS fails to save config

Streetwalker wrote:
Sat Dec 29, 2018 9:52 pm
Did you set the default device properly? That's stored in SRAM on the console itself.
You mean by selecting the SD Gecko in slot B ? if thats it then yes, i select slot B and try to save but fails, then reboot, it automatically loads from slot b, try to save and it also fails
by sidgallup
Sat Dec 29, 2018 9:36 pm
Forum: Support
Topic: SWISS fails to save config
Replies: 3
Views: 679

SWISS fails to save config

This is a strange issue im having with this particular Gamecube. I have SWISS 533 on a miniDVD, SD Gecko with a 64GB MicroSD a few games, when i use this setup on my main Gcube it boots, saves and loads config fine, no problems at all, i use the config just to turn the laser OFF. However, this exact...
by sidgallup
Mon Oct 08, 2018 4:55 am
Forum: Swiss
Topic: SWISS 451 Luigis Mansion freezes
Replies: 2
Views: 1147

Re: SWISS 451 Luigis Mansion freezes

Yeeah that did it, thanks.
by sidgallup
Fri Oct 05, 2018 1:14 am
Forum: Swiss
Topic: SWISS 451 Luigis Mansion freezes
Replies: 2
Views: 1147

SWISS 451 Luigis Mansion freezes

So i just burned a mini DVD with the latest SWISS version and now Luigis Mansion isnt booting past the initial Nintendo logo and sometimes it gives me an eorror tha t says "Failed to setup the file too fragmented?", however, my old SWISS DVD with build 371 loads this same game on this same SD card j...
by sidgallup
Tue Sep 20, 2016 2:04 am
Forum: Hardware / Modding
Topic: build SD Gecko and solder directly to the MoBo
Replies: 2
Views: 964

Re: build SD Gecko and solder directly to the MoBo

Laser works perfectly fine, i just want to be able to boot from SD card for games that are %100 compatible so it last longer. I know i can just order an SD geko clone for $6 on Ebay but i want to learn how to do it myself, im a DIY enthusiast, i have modded all of my videogame consoles and i love th...
by sidgallup
Mon Sep 19, 2016 3:48 am
Forum: GameCube
Topic: Help burning a SnesGX DVD
Replies: 3
Views: 1067

Re: Help burning a SnesGX DVD

I think the issue is that your new dol is having issues with dolphin rather than your iso being bad. Where did you get the DOL from, is it one of my VM enabled builds? If so they won't work most likely in dolphin. Failing that, make an iso with just the dol and upload it somewhere so someone else c...
by sidgallup
Mon Sep 19, 2016 3:37 am
Forum: Hardware / Modding
Topic: build SD Gecko and solder directly to the MoBo
Replies: 2
Views: 964

build SD Gecko and solder directly to the MoBo

Hi, i have an already modded Cube it has a Xeno chip working fine, however i want to be able to load from a microsd card for when the laser eventually gives up or one of my discs gets damaged or lost. I want to make it so it's not visible on the memory card slot B but hide it somewhere on the modem ...
by sidgallup
Thu Aug 11, 2016 4:30 am
Forum: GameCube
Topic: Help burning a SnesGX DVD
Replies: 3
Views: 1067

Help burning a SnesGX DVD

Hi, long story short... i have a mini DVD with the whole Snes collection running from Snes GX, my console has a Xeno chip and this disc works fine, however i want to update the .dol with the latest version of SnesGX. Attached is the directory structure of the Iso, so i only need to replace the bootl...