Search found 12 matches
- Mon Feb 18, 2019 2:19 am
- Forum: Swiss
- Topic: SWISS wont load SSB Melee
- Replies: 7
- Views: 8781
Re: SWISS wont load SSB Melee
After a few tests, the latest version that runs the game is bulild 366, af=ter that the game hangs after pressing start at the character select screen. When you have compatibility issues, try version 431. And try version 1.02 of Melee. If you are not using ... Tried builds 371,431,466,531 and 599, ...
- Tue Feb 12, 2019 10:09 pm
- Forum: Swiss
- Topic: SWISS wont load SSB Melee
- Replies: 7
- Views: 8781
Re: SWISS wont load SSB Melee
After a few tests, the latest version that runs the game is bulild 366, af=ter that the game hangs after pressing start at the character select screen.
- Tue Feb 12, 2019 5:19 pm
- Forum: Swiss
- Topic: SWISS wont load SSB Melee
- Replies: 7
- Views: 8781
Re: SWISS wont load SSB Melee
Try the latest release? Yes i tried build 599, even an older build, downloaded the ISO twice, its a raw ISO file not trimmed, 3 different MicroSD cards, 2 different SD Gecko adapters but still it hangs at the character selection screen forever, im sure ive plyaed this game before with this same set...
- Tue Feb 12, 2019 4:40 am
- Forum: Swiss
- Topic: SWISS wont load SSB Melee
- Replies: 7
- Views: 8781
SWISS wont load SSB Melee
So im trying to play this game from a Gecko SD Card and it always gets stuck after selecting the characters, i can still hear the music but the game never starts.
Tried with rev. 533 and 451.
Every other game ive tried loads just fine, its a 32gb SDHC class 10.
Tried with rev. 533 and 451.
Every other game ive tried loads just fine, its a 32gb SDHC class 10.
- Sat Dec 29, 2018 10:09 pm
- Forum: Support
- Topic: SWISS fails to save config
- Replies: 3
- Views: 7851
Re: SWISS fails to save config
You mean by selecting the SD Gecko in slot B ? if thats it then yes, i select slot B and try to save but fails, then reboot, it automatically loads from slot b, try to save and it also failsStreetwalker wrote: ↑Sat Dec 29, 2018 9:52 pmDid you set the default device properly? That's stored in SRAM on the console itself.
- Sat Dec 29, 2018 9:36 pm
- Forum: Support
- Topic: SWISS fails to save config
- Replies: 3
- Views: 7851
SWISS fails to save config
This is a strange issue im having with this particular Gamecube. I have SWISS 533 on a miniDVD, SD Gecko with a 64GB MicroSD a few games, when i use this setup on my main Gcube it boots, saves and loads config fine, no problems at all, i use the config just to turn the laser OFF. However, this exact...
- Mon Oct 08, 2018 4:55 am
- Forum: Swiss
- Topic: SWISS 451 Luigis Mansion freezes
- Replies: 2
- Views: 4854
Re: SWISS 451 Luigis Mansion freezes
Yeeah that did it, thanks.
- Fri Oct 05, 2018 1:14 am
- Forum: Swiss
- Topic: SWISS 451 Luigis Mansion freezes
- Replies: 2
- Views: 4854
SWISS 451 Luigis Mansion freezes
So i just burned a mini DVD with the latest SWISS version and now Luigis Mansion isnt booting past the initial Nintendo logo and sometimes it gives me an eorror tha t says "Failed to setup the file too fragmented?", however, my old SWISS DVD with build 371 loads this same game on this same...
- Tue Sep 20, 2016 2:04 am
- Forum: Hardware / Modding
- Topic: build SD Gecko and solder directly to the MoBo
- Replies: 2
- Views: 3307
Re: build SD Gecko and solder directly to the MoBo
Laser works perfectly fine, i just want to be able to boot from SD card for games that are %100 compatible so it last longer. I know i can just order an SD geko clone for $6 on Ebay but i want to learn how to do it myself, im a DIY enthusiast, i have modded all of my videogame consoles and i love th...
- Mon Sep 19, 2016 3:48 am
- Forum: GameCube
- Topic: Help burning a SnesGX DVD
- Replies: 3
- Views: 4765
Re: Help burning a SnesGX DVD
I think the issue is that your new dol is having issues with dolphin rather than your iso being bad. Where did you get the DOL from, is it one of my VM enabled builds? If so they won't work most likely in dolphin. Failing that, make an iso with just the dol and upload it somewhere so someone else c...
- Mon Sep 19, 2016 3:37 am
- Forum: Hardware / Modding
- Topic: build SD Gecko and solder directly to the MoBo
- Replies: 2
- Views: 3307
build SD Gecko and solder directly to the MoBo
Hi, i have an already modded Cube it has a Xeno chip working fine, however i want to be able to load from a microsd card for when the laser eventually gives up or one of my discs gets damaged or lost. I want to make it so it's not visible on the memory card slot B but hide it somewhere on the modem ...
- Thu Aug 11, 2016 4:30 am
- Forum: GameCube
- Topic: Help burning a SnesGX DVD
- Replies: 3
- Views: 4765
Help burning a SnesGX DVD
Hi, long story short... i have a mini DVD with the whole Snes collection running from Snes GX, my console has a Xeno chip and this disc works fine, however i want to update the .dol with the latest version of SnesGX. Attached is the directory structure of the Iso, so i only need to replace the bootl...