this is a GC i modified for a friend, with custom cap on the lid to mount wode display. is has sd-card slot in the back, and 2 different usb connections, one for wode and one for the built in harddrive. regular eject button is used for eject on wode. Dude, the display is nice! Have you left the GC ...

this is a GC i modified for a friend, with custom cap on the lid to mount wode display. is has sd-card slot in the back, and 2 different usb connections, one for wode and one for the built in harddrive. regular eject button is used for eject on wode.

ok it still doesnt work. I have also tried an other power source. but nothing works. Is it possible that it wont work because I am using an external power source instead of the 3.3V of the Cube or does it not matter? that does not matter, as long as it is connected to the cube trough ground. i trie...

yamaharacer wrote:havent time to test it. maybe next weekend. have to much to do for my studies.

i will test it with ide und sata hdd.

it does work with ide to sata.

hi guys!
i am working on a port to altera epm240t100 right now, i tried with xc9572 but the code did not fit inside. as soon as my 500 uv-leds arrives and i can make my pcb and test it, i am going to post it here.

if someone want to etch a pcb to use, i made a design and posting it here. i think it is good but you have to change the pins in gc_ide.ucf.
it´s my first pcb design ever, but i hove you will enjoy it.

emu_kidid wrote:I only used a single 330ohm resistor, where did the second go?

it´s not realy needed but if you like me want a second led showing that the curcuit got power, thats where that resistor goes

i'll try to do some shematics for this. and a partlist too i cant help you with the schematics byt i can tell you what you need to make it as easy as possible. your gonna need: kynar wire avg30 something like it. experimental board of your choise. solder iron, solder and flux. 1 X 20x2 pinheader. 1...

i'll try to do some shematics for this. and a partlist too i cant help you with the schematics byt i can tell you what you need to make it as easy as possible. your gonna need: kynar wire avg30 something like it. experimental board of your choise. solder iron, solder and flux. 1 X 20x2 pinheader. 1...

well these 100 are my motivation to get SD-boot polished up for a release :) are you making the pcd design self? in what program. i´m working on one in eagle to etch my self just to make it look more professional and to get away from all wires :P if you got the pcb design and want so share it, you ...

here is some pictures of the adapter i made. built to fit and replace the usb to ide pcb inside an external hdd closure. the chip itself is on the bottomside of my pcb just to make it fit inside, and its using power from the closure to the harddrive and it also uses the original activity led from th...

i finnaly got the one i made working, both the harddrive and the ide-cable was faulty. so now my custom made hdd adapter made to fit inside the external harddrive case works. when do you think we´ll se the new software for the cube?

emu_kidid wrote:Nope, it's not used for anything, feel free to cut it.

i did but got the same fault anyway. my act led does light up as soon as i start the hdd-loader, but just lights up, no blinking or something like that.
could you maybe upload a video of yout hdd-adapter in work?

Got it working :D Time to implement it into the new SD-Boot. I had too many pins on the IDE grounded (pin 28) and I also had cpld pin not connected. I'll post up a guide on how it was built later this week. my pin 28 is also connected to ground, is it used for something in this or could i just cut ...

Hello, Is the based xilins chips the only works in this mod? In my country is very dificult obtain a chip of these class. In the market exits the matrix infinity 1.93, matrix 900, modbo 750 and 4.0, apple75k. Anione of these chips works? Thanks a lot. :D if you can´t port the code to some other chi...