Search found 25 matches

by aleomark
Sat May 16, 2020 4:10 pm
Forum: Swiss
Topic: problem loading zelda pal with an sd and with other it does (Resolved)
Replies: 6
Views: 204

Re: problem loading zelda pal with an sd and with other it does

double checked with 2 GC, both with good battery, same problem


update

I found that if swiss its been loaded first by other media (other sd or dvd), and later manually I load the "problematic" sd , finally the problematic sd works fine.
by aleomark
Fri May 15, 2020 11:16 pm
Forum: Swiss
Topic: problem loading zelda pal with an sd and with other it does (Resolved)
Replies: 6
Views: 204

Re: problem loading zelda pal with an sd and with other it does

If were battery trouble it should affect both SD’s
by aleomark
Fri May 15, 2020 5:03 pm
Forum: Swiss
Topic: problem loading zelda pal with an sd and with other it does (Resolved)
Replies: 6
Views: 204

Re: problem loading zelda pal with an sd and with other it does

Yeah I’ve done that several times, also format SD (fast and full), changed format to fat32 and exfat, all the same result
by aleomark
Thu May 14, 2020 10:57 pm
Forum: Swiss
Topic: problem loading zelda pal with an sd and with other it does (Resolved)
Replies: 6
Views: 204

problem loading zelda pal with an sd and with other it does (Resolved)

problem loading zelda twilight princess pal on ntsc gamecube, I got 2 sd (32 and 128gb), both boot fine ntsc mario sunshine, 32gb boots fine zelda twilight princess pal trought wkf, the other one (128gb) wont boot zelda neither trought wkf, or sd slot a, or sd2sp2. even before loading in swiss the i...
by aleomark
Fri May 08, 2020 10:12 am
Forum: Hardware / Modding
Topic: Updating pluto IIX HDMI (Resolved)
Replies: 2
Views: 288

Re: Updating pluto IIX HDMI

use another programmer isn't a optimum solution, I want to figure it out how use the TXDI/FTDI to update the pluto boards. update I got success finally! in case it helps someone in future, was these: with usb connected to the back of the desktop, disconnected my other things that used COM port like ...
by aleomark
Thu May 07, 2020 11:17 am
Forum: Hardware / Modding
Topic: Updating pluto IIX HDMI (Resolved)
Replies: 2
Views: 288

Updating pluto IIX HDMI (Resolved)

Hi guys, I was trying to update my pluto IIX HDMI, using these guide trough TXDI/FTDI by knjn, everything seems ok, but only thing is that when I plug ground cable to the pluto the TXDI/FTDI stops, and windows stops to get it recognized, it happens both gamecube turned on or off. if I unplugg ground...
by aleomark
Tue May 05, 2020 2:24 am
Forum: Swiss
Topic: getting autoboot nowdays wkf
Replies: 2
Views: 99

Re: getting autoboot nowdays wkf

ok, thanks!
by aleomark
Sun May 03, 2020 6:12 am
Forum: Swiss
Topic: getting autoboot nowdays wkf
Replies: 2
Views: 99

getting autoboot nowdays wkf

hi guys, one question, from wkf 1.5 I did install Swiss auto-boot as initial iso from original WKF (or at least I tough that) 1-load wkf firmware and then I loaded swiss_r827.iso from wbsf sd card. 2-from there I booted sd gecko with an sd fat 32 with Swiss_r827.fzn and .fzn.fw and flashed. Now, whe...
by aleomark
Tue Mar 19, 2019 4:16 pm
Forum: Hardware / Modding
Topic: DVD Drive Emulator Question
Replies: 336
Views: 119158

Re: DVD Drive Emulator Question

Hope soon it will be ready
by aleomark
Sat Jun 09, 2018 7:35 pm
Forum: Swiss
Topic: Swiis forced widescreen obscure center
Replies: 2
Views: 1814

Re: Swiis forced widescreen obscure center

thanks
by aleomark
Sat Jun 09, 2018 6:16 pm
Forum: Swiss
Topic: Swiis forced widescreen obscure center
Replies: 2
Views: 1814

Swiis forced widescreen obscure center

Hi I’m using swiss in a gamecube with component cable, load swiss from cd and also the game: super Mario sunshine pal, forced to 480p and widescreen, only problem is that the center looks more obscure, this dont happen in ntsc version, i like more pal version for the languages , can i fix this someh...
by aleomark
Tue Feb 12, 2013 2:10 pm
Forum: Hardware / Modding
Topic: Plug and play drive replacement adapter Idea
Replies: 529
Views: 203553

Re: Plug and play drive replacement adapter Idea

everybody needs to be patient, unless you can do it by yourself
by aleomark
Sun Nov 25, 2012 9:57 pm
Forum: Swiss
Topic: Swiss 0.3
Replies: 264
Views: 75737

Re: Swiss 0.3

I don't want to flash swiss to wkf yet, so I need to boot it as a .iso, any ideas? thanks! Did you swap the WBFS card with a FAT32 formatted one after booting Swiss? Yes I did, but tried again, and first time was too fast, so It came back to WKF menu, tried again a bit slower, just after GC logo an...
by aleomark
Sun Nov 25, 2012 7:38 pm
Forum: Swiss
Topic: Swiss 0.3
Replies: 264
Views: 75737

Re: Swiss 0.3

Hi, I have a gamecube NTSC USA with wiikey fusion installed successfully, I wanted to load swiss .iso from WKF menu (firm 1.5), ntsc and ntsc-j disc gave me only a black screen, so I compile a swiss boot disc and loaded the iso (using CT1 Swiss DVD, WBFS Manager showed as a pal image), but a screen ...
by aleomark
Mon Apr 18, 2011 2:06 am
Forum: IDE-EXI
Topic: [Review + Tutorial] Adaptador IDE-EXI -English-
Replies: 1
Views: 4004

[Review + Tutorial] Adaptador IDE-EXI -English-

http://2.bp.blogspot.com/_wr7Go91pCz4/RsBvZ7PklBI/AAAAAAAAAJ0/cWdsjRDeQm0/s400/swiss-army-knife.jpg Introduction Hello friends!, today I’m going to talk about the long-awaited accessory for the Gamecube console, you may wonder, why long-awaited? Simple, because each and every disk player cd player,...
by aleomark
Mon Apr 11, 2011 1:18 pm
Forum: IDE-EXI
Topic: [Review + Tutorial] Adaptador IDE-EXI -Spanish-
Replies: 8
Views: 3453

Re: [Review + Tutorial] Adaptador IDE-EXI -Spanish-

Que bueno que lo hayas escrito en español, asi ayudaras a muchos otros que a lo mejor entienden poco el inglés. El problema es que te vayan a decir algo por ponerlo en otro idioma. :lol: Me parece haber visto que le decian a otro usuario que solo escribiera en inglés. Now in english: Great you wrot...
by aleomark
Sun Apr 10, 2011 4:18 pm
Forum: IDE-EXI
Topic: [Review + Tutorial] Adaptador IDE-EXI -Spanish-
Replies: 8
Views: 3453

Re: [Review + Tutorial] Adaptador IDE-EXI -Spanish-

I'll translate it to english soon
by aleomark
Thu Apr 07, 2011 10:59 pm
Forum: Swiss
Topic: Swiss 0.1
Replies: 776
Views: 187785

Re: Swiss 0.1

after boot some games and emulators, when I plug my hdd back in PC almost all files doesn't show, but I guess are there cause the space are still used, but i can't see them, even if I deactive "no show hidden/protected files" in windows xp, how can I fix that?
by aleomark
Thu Apr 07, 2011 10:32 pm
Forum: Swiss
Topic: Swiss feature requests
Replies: 125
Views: 29334

Re: Swiss feature requests

I would like a improved navigation system, cause when you have several isos in one single hdd (I've more than 600) right now you can only go up or down one by one iso -maybe if you hit "R" go down 24 spaces and if you hit "L" you get up 24 spaces- and an option by sort files alphabetically.
by aleomark
Thu Apr 07, 2011 4:16 pm
Forum: IDE-EXI
Topic: How sort files?
Replies: 2
Views: 1758

How sort files?

Hi guys, I've everything working perfect, using these: -IDE-EXI Adapter -12V DC 4-Pin Molex External Power Supply Adapter -Kingwin ADP-06 SATA to IDE Bridge Board Adapter -Samsung 1TB 7200rpm 3.5" SATA HD103UJ -Swiss 0.1 - revision 39 In that HDD I've all the NGC releases in NTSC USA and also the ex...
by aleomark
Thu Apr 07, 2011 4:02 pm
Forum: IDE-EXI
Topic: Power Source
Replies: 34
Views: 12792

Re: Power Source

I recently purchased this: 12V DC 4-Pin Molex External Power Supply Adapter http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150566955679 I want to warn you that the one i recieved worked for 5minutes and then something inside went bang. :evil: The device had severely overheated and I am assumi...
by aleomark
Thu Apr 07, 2011 3:50 pm
Forum: IDE-EXI
Topic: Recommended SATA -> IDE Adapters
Replies: 26
Views: 21948

Re: Recommended SATA -> IDE Adapters

I'm using these one: Kingwin ADP-06 SATA to IDE Bridge Board Adapter

Image

it cost usd 10 plus other usd 10 for shipping in eBay
by aleomark
Thu Apr 07, 2011 3:44 pm
Forum: IDE-EXI
Topic: Compatible HDD's
Replies: 29
Views: 10401

Re: Compatible HDD's

Brand: Samsung
Capacity: 1TB
Speed: 7200rpm
Type:3.5" SATA HDD
Model: HD103UJ
Comments Fast and using Kingwin ADP-06 SATA to IDE Bridge Board Adapter
by aleomark
Thu Apr 07, 2011 1:34 pm
Forum: IDE-EXI
Topic: [Review + Tutorial] Adaptador IDE-EXI -Spanish-
Replies: 8
Views: 3453

[Review + Tutorial] Adaptador IDE-EXI -Spanish-

http://2.bp.blogspot.com/_wr7Go91pCz4/RsBvZ7PklBI/AAAAAAAAAJ0/cWdsjRDeQm0/s400/swiss-army-knife.jpg ...En construcción y expansión. Introducción Buenas amigos, hoy les vengo a hablar de tan esperado accesorio para nuestra querida consola gamecube, ¿Te preguntarás que lo hace tan esperado? Pues que ...
by aleomark
Wed Feb 23, 2011 3:21 pm
Forum: Swiss
Topic: Swiss 0.1
Replies: 776
Views: 187785

Re: Swiss 0.1

Hi, I want to use swiss with 1tb sata hdd, wich sata-ide adapter do you recomend?