I never removed this mod but I found out that adding a switch was a good idea for muti-disc games so it still works to this day also this breaks the 64gb limit on the wasp fusion I found out years later I use an 128gb sandisk SD card in my Wasp works fine and it is because of this mod if I switch i...

That works like magic!
Same sd now auto boots fine!
Just need to test a big Sd, also I did install a 3d print originally designed for gc loader and a gamecube digital port upgrade with a gc video plug Hdmi adapter.

My gamecube got a new boost in 2020!

double checked with 2 GC, both with good battery, same problem


update

I found that if swiss its been loaded first by other media (other sd or dvd), and later manually I load the "problematic" sd , finally the problematic sd works fine.

If were battery trouble it should affect both SD’s

Yeah I’ve done that several times, also format SD (fast and full), changed format to fat32 and exfat, all the same result

problem loading zelda twilight princess pal on ntsc gamecube, I got 2 sd (32 and 128gb), both boot fine ntsc mario sunshine, 32gb boots fine zelda twilight princess pal trought wkf, the other one (128gb) wont boot zelda neither trought wkf, or sd slot a, or sd2sp2. even before loading in swiss the i...

use another programmer isn't a optimum solution, I want to figure it out how use the TXDI/FTDI to update the pluto boards. update I got success finally! in case it helps someone in future, was these: with usb connected to the back of the desktop, disconnected my other things that used COM port like ...

Hi guys, I was trying to update my pluto IIX HDMI, using these guide trough TXDI/FTDI by knjn, everything seems ok, but only thing is that when I plug ground cable to the pluto the TXDI/FTDI stops, and windows stops to get it recognized, it happens both gamecube turned on or off. if I unplugg ground...

ok, thanks!

hi guys, one question, from wkf 1.5 I did install Swiss auto-boot as initial iso from original WKF (or at least I tough that) 1-load wkf firmware and then I loaded swiss_r827.iso from wbsf sd card. 2-from there I booted sd gecko with an sd fat 32 with Swiss_r827.fzn and .fzn.fw and flashed. Now, whe...

Hope soon it will be ready

thanks

Hi I’m using swiss in a gamecube with component cable, load swiss from cd and also the game: super Mario sunshine pal, forced to 480p and widescreen, only problem is that the center looks more obscure, this dont happen in ntsc version, i like more pal version for the languages , can i fix this someh...

everybody needs to be patient, unless you can do it by yourself

I don't want to flash swiss to wkf yet, so I need to boot it as a .iso, any ideas? thanks! Did you swap the WBFS card with a FAT32 formatted one after booting Swiss? Yes I did, but tried again, and first time was too fast, so It came back to WKF menu, tried again a bit slower, just after GC logo an...

Hi, I have a gamecube NTSC USA with wiikey fusion installed successfully, I wanted to load swiss .iso from WKF menu (firm 1.5), ntsc and ntsc-j disc gave me only a black screen, so I compile a swiss boot disc and loaded the iso (using CT1 Swiss DVD, WBFS Manager showed as a pal image), but a screen ...

http://2.bp.blogspot.com/_wr7Go91pCz4/RsBvZ7PklBI/AAAAAAAAAJ0/cWdsjRDeQm0/s400/swiss-army-knife.jpg Introduction Hello friends!, today I’m going to talk about the long-awaited accessory for the Gamecube console, you may wonder, why long-awaited? Simple, because each and every disk player cd player,...

Que bueno que lo hayas escrito en español, asi ayudaras a muchos otros que a lo mejor entienden poco el inglés. El problema es que te vayan a decir algo por ponerlo en otro idioma. :lol: Me parece haber visto que le decian a otro usuario que solo escribiera en inglés. Now in english: Great you wrot...

I'll translate it to english soon

after boot some games and emulators, when I plug my hdd back in PC almost all files doesn't show, but I guess are there cause the space are still used, but i can't see them, even if I deactive "no show hidden/protected files" in windows xp, how can I fix that?

I would like a improved navigation system, cause when you have several isos in one single hdd (I've more than 600) right now you can only go up or down one by one iso -maybe if you hit "R" go down 24 spaces and if you hit "L" you get up 24 spaces- and an option by sort files alph...

Hi guys, I've everything working perfect, using these: -IDE-EXI Adapter -12V DC 4-Pin Molex External Power Supply Adapter -Kingwin ADP-06 SATA to IDE Bridge Board Adapter -Samsung 1TB 7200rpm 3.5" SATA HD103UJ -Swiss 0.1 - revision 39 In that HDD I've all the NGC releases in NTSC USA and also t...

I recently purchased this: 12V DC 4-Pin Molex External Power Supply Adapter http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150566955679 I want to warn you that the one i recieved worked for 5minutes and then something inside went bang. :evil: The device had severely overheated and I am as...

I'm using these one: Kingwin ADP-06 SATA to IDE Bridge Board Adapter



it cost usd 10 plus other usd 10 for shipping in eBay

Brand: Samsung
Capacity: 1TB
Speed: 7200rpm
Type:3.5" SATA HDD
Model: HD103UJ
Comments Fast and using Kingwin ADP-06 SATA to IDE Bridge Board Adapter