Search found 66 matches
Re: Swiss 0.3
Try this.
Re: Swiss 0.3
Why do you run swiss from the 2GB card?
I don't think you would mind 2MB less from the 32GB one =)
^nvm that just remembered that SDload doesn't support SDHC.
Try reinserting the card or the SDGecko altogether after booting swiss 0.3.
I don't think you would mind 2MB less from the 32GB one =)
^nvm that just remembered that SDload doesn't support SDHC.
Try reinserting the card or the SDGecko altogether after booting swiss 0.3.
- Sat Oct 06, 2012 6:42 am
- Forum: Hardware / Modding
- Topic: making a sd card adaptor for gamecube
- Replies: 14
- Views: 11159
Re: making a sd card adaptor for gamecube
No, you must first boot swiss or some other program like SD load, and then you'll be able to launch the application.
Just burn swiss on a DVD, then select the slot your SD card is in and run the program.
I'm sure there are tutorials in here.
edit: This could probably come in handy for that.
Just burn swiss on a DVD, then select the slot your SD card is in and run the program.
I'm sure there are tutorials in here.
edit: This could probably come in handy for that.
- Sat Sep 29, 2012 6:46 am
- Forum: Research & Development
- Topic: Zelda: Wind waker Tech and Texture Analysis
- Replies: 8
- Views: 9542
Re: Zelda: Wind waker Tech and Texture Analysis
The air chamber in-line BMW GT1 configuration, stroke restricted; oil seal is directly affected by the result lexia 3 v47 of the actuation force in the piston chamber pressure, high breakdown voltage is required and must pay Mb Star C3 particular attention to its processing requires high precision ...
- Fri Sep 28, 2012 7:49 pm
- Forum: Hardware / Modding
- Topic: making a sd card adaptor for gamecube
- Replies: 14
- Views: 11159
Re: making a sd card adaptor for gamecube
Wire the mobo's sense pin to 3.3v, or else the gc won't ever see anything connected to that port.
- Wed Sep 19, 2012 2:18 pm
- Forum: Modchips
- Topic: what is this ? about xeno
- Replies: 5
- Views: 8001
- Wed Sep 19, 2012 6:45 am
- Forum: Hardware / Modding
- Topic: 128MB GameCube Memory Card - keep getting corruped :/
- Replies: 9
- Views: 7316
Re: 128MB GameCube Memory Card - keep getting corruped :/
^
Yeah!
Sometimes i must reinsert it as it doesn't get recognized, but hasn't happened in some time.
Fortunately both my 128 and 256 MB cards have worked fine till now
Yeah!
Sometimes i must reinsert it as it doesn't get recognized, but hasn't happened in some time.
Fortunately both my 128 and 256 MB cards have worked fine till now
- Tue Sep 18, 2012 8:44 pm
- Forum: Hardware / Modding
- Topic: 128MB GameCube Memory Card - keep getting corruped :/
- Replies: 9
- Views: 7316
Re: 128MB GameCube Memory Card - keep getting corruped :/
Dunno about Master Quest, but everything was smooth on Sunshine.
What's the problem btw? Corrupt files? The entire card or only with specific games/files?
Back up the card and try deleting the savegame...or all of them maybe?
What's the problem btw? Corrupt files? The entire card or only with specific games/files?
Back up the card and try deleting the savegame...or all of them maybe?
Re: Swiss 0.3
No, buying a higher class card will not change any of the "problems" you're having, since higher class == faster write speed. (Makes sense if you think that HD cameras require faster cards than SD ones ;) ) The slowdown on cutscenes and menus is normal but hey-the gameplay is just fine, ri...
- Mon Sep 10, 2012 2:10 pm
- Forum: Modchips
- Topic: Xenogc flashing...
- Replies: 11
- Views: 8043
Re: Xenogc flashing...
Τίποτα...καλοφάγωτο.
Για ότι άλλο σου κατέβει εδώ είμαστε.
Για ότι άλλο σου κατέβει εδώ είμαστε.
- Mon Sep 10, 2012 9:14 am
- Forum: Modchips
- Topic: Xenogc flashing...
- Replies: 11
- Views: 8043
Re: Xenogc flashing...
...compile what? >_>
Unless you're making a custom xeno firmware you don't need to compile anything.
Just making sure
Unless you're making a custom xeno firmware you don't need to compile anything.
Just making sure
- Mon Sep 10, 2012 8:49 am
- Forum: Modchips
- Topic: Xenogc flashing...
- Replies: 11
- Views: 8043
Re: Xenogc flashing...
/offtopic
mind;blown
mind;blown
- Mon Sep 10, 2012 7:57 am
- Forum: Modchips
- Topic: Xenogc flashing...
- Replies: 11
- Views: 8043
Re: Xenogc flashing...
Yes , you could just write the .dol in an sd and run it through swiss.
linky
BUT
You MUST connect the microcontroller's RESET pin to GND so it can enter programming mode.
No, this can't be done through software.
linky
BUT
You MUST connect the microcontroller's RESET pin to GND so it can enter programming mode.
No, this can't be done through software.
- Tue Sep 04, 2012 8:22 pm
- Forum: Swiss
- Topic: Starting Swiss (or other DOL) using Action Replay codes?
- Replies: 33
- Views: 37754
Re: Starting Swiss (or other DOL) using Action Replay codes?
So, what happens if you make a mistake while entering that code? (talking about the long one obviously )
Nothing permanent I hope >_>
Nothing permanent I hope >_>
Re: Swiss 0.3
https://code.google.com/p/swiss-gc/
Emu updates swiss frequently.
If you lurk around and he gets a new version out, you'll probably notice.
(gawd I just can't get out of my mind that lagless SSBM opening :3)
Can't wait \o/
Emu updates swiss frequently.
If you lurk around and he gets a new version out, you'll probably notice.
(gawd I just can't get out of my mind that lagless SSBM opening :3)
Can't wait \o/
Re: Swiss 0.3
So you can write normally. That's all we wanted. Why spend so much time and energy trying to decipher what you wrote? ._. Also, you're in teh internetz. Don't take things seriously, nobody is attacking you. Just being sarcastic. /ontopic: Swiss version? Have you tried booting with/without dvd, high/...
Re: Swiss 0.3
I bet Hitler was a (Grammar) Nazi too.
And yes, writing in proper English will make world peace, give each one of us 10$ and even your gamecube work....
](and help us understand you problem)
Re: Swiss 0.3
Some quick info: http://desmond.imageshack.us/Himg818/scaled.php?server=818&filename=img0573sm.jpg&res=landing http://desmond.imageshack.us/Himg706/scaled.php?server=706&filename=img0574js.jpg&res=landing http://desmond.imageshack.us/Himg442/scaled.php?server=442&filename=img0577...
- Tue Aug 07, 2012 8:53 pm
- Forum: IDE-EXI
- Topic: Starting the IDE-EXI project !
- Replies: 72
- Views: 119577
Re: Starting the IDE-EXI project !
There's this thread too.
It's full of troubleshooting spam posts , and extremely useful.
I'd suggest reading everything at least once, so you get the general idea.
btw what's that device you posted?
Cpld+1mbit flash? Some kind of flashcart?
It's full of troubleshooting spam posts , and extremely useful.
I'd suggest reading everything at least once, so you get the general idea.
btw what's that device you posted?
Cpld+1mbit flash? Some kind of flashcart?
- Mon Aug 06, 2012 8:20 am
- Forum: IDE-EXI
- Topic: IDE-EXI Troubles
- Replies: 6
- Views: 7601
Re: IDE-EXI Troubles
^
that's where windows screw the plan up
that's where windows screw the plan up
- Sun Aug 05, 2012 9:28 pm
- Forum: GameCube
- Topic: SD Media Launcher Issues.
- Replies: 15
- Views: 11582
Re: SD Media Launcher Issues.
Well probably the "safest" and more convenient way to boot swiss is to burn it on a dvd.
Then you can load stuff from the SD card.
Search around the interwebs if you want to buy one.
Sites like DX etc, sell if for 4-5$.
Building one isn't that hard either.
Then you can load stuff from the SD card.
Search around the interwebs if you want to buy one.
Sites like DX etc, sell if for 4-5$.
Building one isn't that hard either.
- Sun Aug 05, 2012 8:32 pm
- Forum: GameCube
- Topic: SD Media Launcher Issues.
- Replies: 15
- Views: 11582
Re: SD Media Launcher Issues.
You got a xenogc?
Then why use a SDML?
Unless you meant SDGecko.
Then why use a SDML?
Unless you meant SDGecko.
- Wed Aug 01, 2012 9:13 pm
- Forum: Hardware / Modding
- Topic: SD gecko not working properly?
- Replies: 8
- Views: 7689
Re: SD gecko not working properly?
np
Actually when I first tried to do that I made (or, actually, didn't ) exactly the same thing.
Actually when I first tried to do that I made (or, actually, didn't ) exactly the same thing.
- Wed Aug 01, 2012 8:25 pm
- Forum: Hardware / Modding
- Topic: SD gecko not working properly?
- Replies: 8
- Views: 7689
Re: SD gecko not working properly?
Yup, just like in the diagram.
- Wed Aug 01, 2012 8:04 pm
- Forum: Hardware / Modding
- Topic: SD gecko not working properly?
- Replies: 8
- Views: 7689
Re: SD gecko not working properly?
I don't see 3.3 volts going to the sense pin. (= when you power up the gc, the slot should appear empty). If you connect the sense pin an error message should pop up. Retake this pic so that the connections are displayed clearly. Also, if you haven't already done so, read this carefully, and trouble...