Try this.

Why do you run swiss from the 2GB card?
I don't think you would mind 2MB less from the 32GB one =)

^nvm that just remembered that SDload doesn't support SDHC.

Try reinserting the card or the SDGecko altogether after booting swiss 0.3.

No, you must first boot swiss or some other program like SD load, and then you'll be able to launch the application.

Just burn swiss on a DVD, then select the slot your SD card is in and run the program.
I'm sure there are tutorials in here.

edit: This could probably come in handy for that.

The air chamber in-line BMW GT1 configuration, stroke restricted; oil seal is directly affected by the result lexia 3 v47 of the actuation force in the piston chamber pressure, high breakdown voltage is required and must pay Mb Star C3 particular attention to its processing requires high precision ...

Wire the mobo's sense pin to 3.3v, or else the gc won't ever see anything connected to that port.

Isn't this the XenoGC fork? >_>

viewtopic.php?f=20&t=716

^
Yeah!

Sometimes i must reinsert it as it doesn't get recognized, but hasn't happened in some time.
Fortunately both my 128 and 256 MB cards have worked fine till now

Dunno about Master Quest, but everything was smooth on Sunshine.

What's the problem btw? Corrupt files? The entire card or only with specific games/files?

Back up the card and try deleting the savegame...or all of them maybe?

No, buying a higher class card will not change any of the "problems" you're having, since higher class == faster write speed. (Makes sense if you think that HD cameras require faster cards than SD ones ;) ) The slowdown on cutscenes and menus is normal but hey-the gameplay is just fine, ri...

Τίποτα...καλοφάγωτο.
Για ότι άλλο σου κατέβει εδώ είμαστε.

...compile what? >_>
Unless you're making a custom xeno firmware you don't need to compile anything.

Just making sure

/offtopic

mind;blown

Yes , you could just write the .dol in an sd and run it through swiss.
linky

BUT
You MUST connect the microcontroller's RESET pin to GND so it can enter programming mode.

No, this can't be done through software.

So, what happens if you make a mistake while entering that code? (talking about the long one obviously )

Nothing permanent I hope >_>

https://code.google.com/p/swiss-gc/

Emu updates swiss frequently.
If you lurk around and he gets a new version out, you'll probably notice.

(gawd I just can't get out of my mind that lagless SSBM opening :3)
Can't wait \o/

So you can write normally. That's all we wanted. Why spend so much time and energy trying to decipher what you wrote? ._. Also, you're in teh internetz. Don't take things seriously, nobody is attacking you. Just being sarcastic. /ontopic: Swiss version? Have you tried booting with/without dvd, high/...

I bet Hitler was a (Grammar) Nazi too.

And yes, writing in proper English will make world peace, give each one of us 10$ and even your gamecube work....
](and help us understand you problem)

Some quick info: http://desmond.imageshack.us/Himg818/scaled.php?server=818&filename=img0573sm.jpg&res=landing http://desmond.imageshack.us/Himg706/scaled.php?server=706&filename=img0574js.jpg&res=landing http://desmond.imageshack.us/Himg442/scaled.php?server=442&filename=img0577...

There's this thread too.
It's full of troubleshooting spam posts , and extremely useful.

I'd suggest reading everything at least once, so you get the general idea.

btw what's that device you posted?
Cpld+1mbit flash? Some kind of flashcart?

^
that's where windows screw the plan up

Well probably the "safest" and more convenient way to boot swiss is to burn it on a dvd.

Then you can load stuff from the SD card.
Search around the interwebs if you want to buy one.
Sites like DX etc, sell if for 4-5$.

Building one isn't that hard either.

You got a xenogc?
Then why use a SDML?

Unless you meant SDGecko.

np
Actually when I first tried to do that I made (or, actually, didn't ) exactly the same thing.

Yup, just like in the diagram.

I don't see 3.3 volts going to the sense pin. (= when you power up the gc, the slot should appear empty). If you connect the sense pin an error message should pop up. Retake this pic so that the connections are displayed clearly. Also, if you haven't already done so, read this carefully, and trouble...