Great idea! GC drive passthrough, clean and easy for maintenance. Would love to have a set of two of those for a WODE install.

Yes keep those two connected together to 3.3v, they are separate as they power separate things.

Kinda confused on how the list for 2nd run is going, as it only shows one person? unless that just isn't updated. In any case, would also like to have a go at this, would be really interesting. Looking forward to new developments. That is part of the first run, the second list is for optical audio ...

When needed, I'll cut traces and drill little holes on the "copper hole" that connect to the back side. Take a look at the datasheet: http://www.xilinx.com/support/documentation/data_sheets/ds056.pdf On page 9, it shows the power/ground pins that are supposed to be connected together. As ...

100nS? This is a Capacitor?
Yes setting fuses can be very important.

The 1.5 update file on wiikeyfusionmod.com was 1:1 identical to the original site. Try the 1.2 Recovery Image from wiikeyfusionmod.com

Can somebody take a screenshot of this? I can't find it in iMPACT or the SDK ver. 14.1, and I suspect that the programming part is what's blowing my party. Also, what happens if you try ide-exi in swiss without an HDD connected? Is it detected? (Also sorry for the necro, but I don't think I should ...

have you clicked the link? look at his photos - his computer cases look worse than any yellowed nes i've ever seen!! Yes, I have clicked it and read the article. Not sure why at the time of posting I though of the NES/SNES to be any different. I don't know either, but I understood that some of thos...

Thanks for sharing this information. I have a controller port cover and a dreamcast which has some light yellowing and was thinking of painting them. Will probably try this instead.
I don't think this will work on the aging yellowing of NES/SNES cases, anyone know?

is there a way to use for example a ide/usb adaptor to connect your hdd to pc with an ide/exi in a line? I dont want do disconnect the hdd every time ehen I want to put new files on it. I don't have a IDE to USB to try this, but I've seen this video: http://www.youtube.com/watch?v=UBxugtEuZfk Looks...

Hello everybody, I will install a wiikey fusion on my GameCube. I have a little question. Is it really necessary to put a switch on pin 29 Wii? Without switch the wiikey would it not constantly lit? You need a NC momentary switch to connect Wiikey 29 to GND, doesn't work if connected directly, and ...

Add me to the A/V board list.

Amazing work as always emu_kidid.

@master801, it's not released yet.

Just curious what happen to this test?
Is there a test build of swiss that support IDE/SD Gecko on Serial Port 1?

Looks great so far, been thinking of making one, but the case making/modifying mainly put me off from attempting it. Would love to see how work progresses.
Good Luck!

Very cool how it all fits. Looks amazing.
Good job, and thanks for sharing!

I've recently polished mine with non-gel toothpaste. Brasso has worked well on my Xbox jewel, but I didn't have any to try on the jewel.
Looks nice!

By the way, are newer gamecube jewels taped/glued on? Heat it to remove?

I've asked this question before and been told this was a future feature that was never released.

I didn't know there are still demand in these things. Thought all the attention went to the Wode.

Then again the design files had been downloaded 265 times throughout the year, wonder if anyone else had them fabricated.

Yeah, it's not worth their time to setup and make single boards so small additional of boards doesn't cost too much. It's a pain to get a single prototype of a board cheaply. Not sure how much each board cost since I had other boards made and such, but I would guess it to be around $10-15 depending ...

It was for personal use, so I had five boards made since price increase isn't much.

Sent the files off a week and a half ago, soldered them today. The decoupling cap got stuck under the memory card cover. I now see why you don't have them soldered.
Anyway, thanks for the Gerber files!

I believe you treat them as a original game.

http://multielectronicscity.com/home.php?cat=10
http://www.divineo.es/advanced_search_r ... =xcm+viper

Keeps getting better and better. Boards look great. Too bad about those possibly dead chips.