Search found 986 matches

by Papy.G
Mon Mar 11, 2019 9:38 pm
Forum: Hardware / Modding
Topic: Flakey dvd drive
Replies: 1
Views: 3486

Re: Flakey dvd drive

I know laser fail is comon on the GC, but try first to pull dust out with a very soft and clean paint brush, blow it with air in can, then, check for the grease along the full stroke of the lens on its worm screw and guide. If you get no better result, then you may adjust the laser power by lttle st...
by Papy.G
Fri Mar 08, 2019 11:01 am
Forum: Hardware / Modding
Topic: What modcip works in panasonic q?
Replies: 36
Views: 55956

Re: What modcip works in panasonic q?

The zone is already the required one, so better then debating for hours if it should or shouldn't work, it is just about slapping a disc into that Q, to check if Pal DVDs will playback on it. :roll: It will just work, or won't, but this won't harm the hardware anyway, we'll then definitely know. :P ...
by Papy.G
Thu Mar 07, 2019 11:53 pm
Forum: Hardware / Modding
Topic: What modcip works in panasonic q?
Replies: 36
Views: 55956

Re: What modcip works in panasonic q?

For the DVD video Playback, aren't you in the european Zone 2?
Japan is in that zone too, so it should just work. 8-)
Isn't that good news?
by Papy.G
Thu Mar 07, 2019 11:10 pm
Forum: Softmods
Topic: Gameboy Player ROM issues
Replies: 1
Views: 7281

Re: Gameboy Player ROM issues

Hi, something must be wrong with your memory cards setup. 1: You should be able to run GBI from the same memory card as SWISS. 2: You should be able to run the GBP Startup Disc ISO dump from it as well. 3: You should be able to launch the GBP Startup Disc Backup DVD too. Do you run SWISS from a Memo...
by Papy.G
Thu Mar 07, 2019 8:57 am
Forum: Welcome
Topic: I finally bought a Gamecube!!!
Replies: 4
Views: 10297

Re: I finally bought a Gamecube!!!

Welcome, if you want to lenghten the laser life, you can use SWISS as much as possible, and run most of your games' backups off an SD card. You can also try to clean the lens the better and step the laser adjustment down the lower possible before it can't boot (and run your games that won't work fro...
by Papy.G
Wed Mar 06, 2019 2:22 pm
Forum: Hardware / Modding
Topic: What modcip works in panasonic q?
Replies: 36
Views: 55956

Re: What modcip works in panasonic q?

The gamecube motherboard in the Panasonic Q is essentially the same as in a regular Dol-001 Gamecube. So any GC modchip should do, and the solder pads are not differently placed, making guides for the GC still valid for the Q. If you do the region switch, the Q will act as a NTSC-US GC, thus format ...
by Papy.G
Tue Mar 05, 2019 11:51 am
Forum: Research & Development
Topic: BBA Cloning
Replies: 6
Views: 26636

Re: BBA Cloning

There are some Ethernet and Wifi devices designed to work in SPI mode with Arduinos, Raspis and other trending SBCs that are basically a MCS core and a dedicated communication core packed in one chip. Some of them may be reprogrammed to support the specific protocol that the GameCube and BBA use. Or...
by Papy.G
Tue Mar 05, 2019 11:25 am
Forum: Welcome
Topic: Long time French Zelda player new there.
Replies: 1
Views: 6970

Long time French Zelda player new there.

Hi, my parents not beeing that much fond of technology, I entered the Video Game world quite late, with the Gameboy for '92 Christmas, and had to play only Tetris for one year then got Link's Awakening next Christmas. From there began a high addiction to adventure games, and espescially Zelda ones. ...
by Papy.G
Tue Mar 05, 2019 10:15 am
Forum: Hardware / Modding
Topic: HELP WHIT MAINBOARD GC
Replies: 1
Views: 3571

Re: HELP WHIT MAINBOARD GC

Hi there, what's wrong with the GC, what did lead you to think U11 doesn't work?
Does the mainboard suffers from moist, dirt or electrolyte leaks?
by Papy.G
Tue Mar 05, 2019 9:01 am
Forum: Welcome
Topic: GREETINGS TO EVERYONE FROM PERU
Replies: 1
Views: 6565

Re: GREETINGS TO EVERYONE FROM PERU

Hello, and welcome here. I assume you're new to board/forum posting, so I have to inform you that writing in capitals implies you are speaking loud, meaning you may be angry or something. People often just ignore users posting in whole capital letters. Also, take care of sentence structure, since th...
by Papy.G
Mon Mar 04, 2019 2:29 pm
Forum: Swiss
Topic: Newbie PAL Gamecube questions. Please help!
Replies: 7
Views: 15313

Re: Newbie PAL Gamecube questions. Please help!

Hello, I will try to answer my best, as a Pal-native player, since I came across the same questions as you. 1. This question can be understood in many different ways, so to clarify, playing games from any region on any region GC would look the same when in 480lines provided the game is 480lines (60H...