just wanted to try to flash the image. now my gamecube fusion doesnt work anymore. while updating it stays at verifying 02000 and nothing went on. so I switched after about 2h off now I wanted to use the recovery image and also nothing works. it doesnt get recognized although I programmed everything...

what is firmware v2?

swiss is getting better and better. now the only two things that may miss is in game reset and dma support for the ide/exi. then it would be a realy swiss army knife. emu you are realy the best. I have just ordered a new gamecube to prepare my an other fusioncube.

yeah I have already thought about such a solution. Will test it tomorrow. I think if it works I will soldere a relais inside my gamecube which disconnects the ide/exi from power when the usb cable is pluged in and reconnects it when it gets unpluged.

is there a way to use for example a ide/usb adaptor to connect your hdd to pc with an ide/exi in a line? I dont want do disconnect the hdd every time ehen I want to put new files on it.

I have got a question about swiss. is it possible to copy games from sd card (wiikey fusion) via the ide/exi to my hard drive? or can I prepare a method like using a ide usb adaptor parallel with my ide/exi for transfering files?

liquitt wrote:Urm i think i want on the first list then...?

me too.

andzlay wrote:Sign me for one A/V board, please. Maybe combined shipment with liquitt would be a nice option again?

same here if it is possible

I think he wants to prepare hin own xeno gc with the source code and an atmel atmega8l µC. And he doesnt know what he has to do. So you need a programmer for the atmega and a program on your PC for example bascom to program your atmega with the hex file out of the rar file from the source code. then...

I dont think that there is less demand, cause if Emu is finish with his DMA support the IDE EXI is nearly that fast as the Wode. Emu I would buy one or two.

I would say your cables are too long. that could be why the games arent loading. by the way on your bluechip are still parts that have to be desoldered.

realy great design. where can I buy one , it looks realy great, good work.

emu you are doing a realy good job with you application. now I have a short question. will there every be dma support for the ide exi in the future?

ok that says also why my other bluechip that I have build a year ago never worked.

yeah, it works now but only one in 50 times. I think its a hardware problem with the data lines to the memory card. what lenght should the cables have?

edit: ok i got it. the cables were to long. now it works perfect.

ok I got it. the ucf file is wrong. A4 isnt pin 52 on the bluechip. its pin 36. here is the right ucf file and jed file for people who want to create a ide exi with bluechip.

which jed file do you mean? when I extract the gcide.zip file there isnt any jed file. and where can i configure the pin mapping?

ok I read the tutorial once again and used ISE to generate my isp file. for this i changed the gc-ide.ucf file with the bluechip one, then I opened ISE and opened the ide2exi project. there I pressed "Implement Design" and "Rerun all". Then I recognized that ISE has prepared me a...

yeah i know that i have to program it but when i open the exi2ide.ipf file, it wants also to load an isp file but this file i dont have for the bluechip. i only can erase the xilinx nothing more.

hi, today I build my ide/exi adapter. I messured every pin 3 times and everything seems good. After I connected it to my gamecube it doesnt work. I used this: http://www.gc-forever.com/gchdd/build.htm now i think that my bluechip v9 which I used for it isnt programmed correctly. Swiss should recogni...

yeah I know and cause of this I am asking if there will ever be a version of swiss for using ide/exi out of the bba slot.

does swiss still need a disc in the drive for booting games?

he, I just programmed my bluechip v9 with the jed file. thanks to liquitt again for the bluechip , now I wanted to ask befor I connect it to my memory card slot if there will ever be a chance that swiss will work with the ide/exi installed to the BBA slot?

thanks. but I need the name of it or another device which has the same size for preparing a layout in eagle

Hi,
just wanted to know if somebody could say me what kind of device the with "Max Safe Cut Alternate DD Points" labled parts are.