gc-forever - Gamecube/Wii Forums

Code: Select all

08/01/2013: ( Official Version 0.0.1 release by megalomaniac )
--------------------------------------------------------------
based on FCE Ultra GX 3.3.4 source by tantric
http://code.google.com/p/fceugc/source/checkout
svn r607

[NGC]
- WKF support added
   . load roms from FAT formatted SD card in WKF slot
   . no write support: save settings and progress to other device
- NTSC widescreen (480i/480p autodetect)
   . default video display setting for gamecube
   . change setting in video menu if you dont like it
- EXIT Menu button now defaults to "reboot" not PSOload
   . WKF users: hit pin29 switch to avoid DRE on reboot

[NGC/Wii]
- IDE-EXI support added
   . load roms from HDD
   . SlotA or SlotB selectable device
   . write support not yet added, save settings and progress to other device
- Settings.xlm updated to allow selection for new devices
   . added devices include IDE-EXI and WKF
   . settings.xml cannot be saved to these devices

Thanks emu_kidid for borrowed swiss WKF & IDE-EXI code

Code: Select all

[NGC/Wii] - please delete your settings file from SD / USB / SAMBA or SD GECKO card before first boot
[NGC] - the config file "settings.xml" can only be saved and loaded to/from SD Gecko


IDE-EXI and WKF: see below
     FIRST BOOT OF THIS VERSION:
        1. if found, browser will default to display contents from SD Gecko slot
           else browser will default to device manager menu
        2. Go to "Settings"
        3. Configure settings options for Load Device
        4. "Go Back"
        5. "Go Back"
        6. EXIT

     SECOND BOOT
        1. if found, browser will default to display contents from PREFERRED LOAD DEVICE 
           else browser will default to device manager menu