HELP MegadriverV5+WASP

gcpro · Post by **gcpro** » Fri Jul 03, 2015 12:05 am

Sorry for my english...
I made the install, check all pins with a multimeter and its ok (one point of each side of board...)
When i power on, the blue ligth blink, turn off and the gc show the error message...
Can someone help me?

gcpro · Post by **gcpro** » Fri Jul 03, 2015 1:22 am

Well, problem solved and another problem comes.
I solved the problem switch the pin number 1 to on.
When it boot SWISS it said something like "switch pin 3 and 4 to correct region" but if i do that, did not boot anymore.
So ok, i let only the pin 1.
Well, Swiss boot but i've tried to load games and received "disc does not contain valid word at 0x1c"
So i've tried to open another version of swiss.dol and did not open the dol.
So i've tried to flash the new version of swiss...
after the flash, do not work anymore, i power up and give disc read error....

megalomaniac · Post by **megalomaniac** » Fri Jul 03, 2015 1:58 am

http://www.gc-forever.com/wiki/index.ph ... ASP_Fusion

gcpro · Post by **gcpro** » Fri Jul 03, 2015 3:49 am

megalomaniac wrote:http://www.gc-forever.com/wiki/index.ph ... ASP_Fusion

Thanks mega, but this is not the problem anymore...
After update Swiss version, it wont work anymore...
power on and give disc read error...
maybe i do the wrong process...
I've power on and execute swiss(ntsc).fzn
after finished the process, won't boot swiss anymore...
maybe i brick?

megalomaniac · Post by **megalomaniac** » Fri Jul 03, 2015 4:11 am

gcpro wrote: I've power on and execute swiss(ntsc).fzn

what is the exact name of the file you flashed?

gcpro · Post by **gcpro** » Fri Jul 03, 2015 4:28 am

megalomaniac wrote:
gcpro wrote: I've power on and execute swiss(ntsc).fzn
what is the exact name of the file you flashed?

swiss_r296(ntsc).fzn

megalomaniac · Post by **megalomaniac** » Fri Jul 03, 2015 5:10 am

you should not have had any issues with flashing...
try a 1.2 restore to see if it will recognize the SD card...

gcpro · Post by **gcpro** » Fri Jul 03, 2015 5:12 am

megalomaniac wrote:you should not have had any issues with flashing...
try a 1.2 restore to see if it will recognize the SD card...

already tried, not work =\
oh and when i flash i see some message like "firmware not found" (i think)

megalomaniac · Post by **megalomaniac** » Fri Jul 03, 2015 5:17 am

how did you create the 1.2 restore iso?
did you use DD or some other method?

gcpro · Post by **gcpro** » Fri Jul 03, 2015 5:18 am

megalomaniac wrote:how did you create the 1.2 restore iso?
did you use DD or some other method?

Win32 disk imager...
I'll try via DD and post my results...
Thanks mega...

HELP MegadriverV5+WASP

HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP

Re: HELP MegadriverV5+WASP