Wasp Fusion
-
- Posts: 5
- Joined: Thu Jul 09, 2015 7:19 am
Wasp Fusion
Hey guys, I'm completely new to mod chips and have absolutely no idea what I'm doing. I'd love some help. Basically I have a megadrive v6 and a wasp fusion that I'm fairly sure I've soldered up correctly (even though it might be a bad solder job). I've heard that the wasp comes pre loaded with autoboot swiss. I'm not getting a blue light on the wasp when I try to power things up which to my knowledge means I'm not getting power. Also I don't know if this makes a difference or not but I don't have an sd card plugged in because I don't actually have one. Every time I try to power on I just get an error message. Any help would be much appreciated!
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Wasp Fusion
No SD card = error message
Whats happening right now is the WASP detects there is no SD card so it sets itself into DVD passthru mode. Since there is no DVD drive connect thru the WASP then this triggers the error
Whats happening right now is the WASP detects there is no SD card so it sets itself into DVD passthru mode. Since there is no DVD drive connect thru the WASP then this triggers the error
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
-
- Posts: 5
- Joined: Thu Jul 09, 2015 7:19 am
Re: Wasp Fusion
Stuck an sd card in and got the same result:/
-
- Posts: 5
- Joined: Thu Jul 09, 2015 7:19 am
Re: Wasp Fusion
I guess ill just re solder it, maybe try to clean it up a bitmegalomaniac wrote:No SD card = error message
Whats happening right now is the WASP detects there is no SD card so it sets itself into DVD passthru mode. Since there is no DVD drive connect thru the WASP then this triggers the error
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Wasp Fusion
hmmmm....
just noticed this:
just noticed this:
- Attachments
-
- pxu1O1O.jpg
- (82.24 KiB) Not downloaded yet
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
-
- Posts: 15
- Joined: Mon Sep 07, 2015 11:01 pm
Re: Wasp Fusion
Does anyone know where to get a wasp fusion or wiikey fusion now a days I've tried to find a seller and havent
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: Wasp Fusion
http://www.eurasia.nu/shop/product_info ... a71d579955GamecubeNick wrote:Does anyone know where to get a wasp fusion or wiikey fusion now a days I've tried to find a seller and havent
Comes with WKF fusion firmware 1.4 though. No swiss autoboot on flash from dealer
-
- Posts: 15
- Joined: Mon Sep 07, 2015 11:01 pm
Re: Wasp Fusion
How hard is it to install autoboot?
Re: Wasp Fusion
You can also get them on badassconsoles.com, pre flashed with Swiss autoboot.
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: Wasp Fusion
I figured he knew that already since he just soldered a V6 in his cubeStreetwalker wrote:You can also get them on badassconsoles.com, pre flashed with Swiss autoboot.
Re: Wasp Fusion
It's not the same guy.
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: Wasp Fusion
Oh your right didn't notice that. But if he is in need of it now then he will have to go with eurasia because Mega is taking a break right now doing his GCvideo build and there out of stock as of right nowStreetwalker wrote:It's not the same guy.
-
- Posts: 15
- Joined: Mon Sep 07, 2015 11:01 pm
Re: Wasp Fusion
So if I end up buying one from eurasia how do I flash it with Swiss autoboot? Or how long do you think restocking would take?
- megalomaniac
- Posts: 2480
- Joined: Sun Aug 21, 2011 5:33 am
- Location: Drunk in Texas
- Contact:
Re: Wasp Fusion
can you wait about another week or two?
>>> BadAssConsoles.com <<<emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
-
- Posts: 15
- Joined: Mon Sep 07, 2015 11:01 pm
Re: Wasp Fusion
Ya I can wait I'm not in a crazy rush. Are you the one who runs the badassconsles website?
Re: Wasp Fusion
Wait, it'll be worth it
-
- Posts: 15
- Joined: Mon Sep 07, 2015 11:01 pm
Re: Wasp Fusion
I am Waiting patiently. Just need to figure out if I need to get a mega drive or not and if so which one do I get? I plan on making a portable and the most space saving and easiest to wire up would be preferable.
Re: Wasp Fusion
Is there a preorder for the nexr batch of Wasp Fusion?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: Wasp Fusion
No just wait till mega is done with his GCvideo project. Everything will be back soonXC-3730C wrote:Is there a preorder for the nexr batch of Wasp Fusion?
Sent from my SAMSUNG-SM-N910A using Tapatalk
-
- Posts: 15
- Joined: Mon Sep 07, 2015 11:01 pm
Re: Wasp Fusion
What is his GCvideo on? Is there somewhere I can watch it?