"Disc does not contain valid word at 0x1C"

All your console related questions and answers :)
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

"Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Wed Jul 22, 2015 12:26 am

I'm sorry if this has been posted before.

I just got my Wasp and Megadrive v3 in the mail (thanks to badassconsoles).

I did the solder jumpering that was in the video on his website. I got Swiss v0.3 Rev 296 to start up. It shows icons for the first 10 or so games on my SD card. Those games seem to work fine. When I select a game with an icon that does not show, I get an error "Disc does not contain valid word at 0x1C"

I am not the most tech savvy person, so I have no idea what this means. Any help would be appreciated.

Edit: Just an update. I formatted the SD card to Fat32, and then only put a few games on the card around ten, some that worked before, and some that did not). All the ones that worked previously still work, and some of the others worked too. But there are still some that give the error. I'm assuming that it must be something I'm doing with the SD card (it's a 64 gig SDHC, I don't know the brand). Any information will help. Thanks
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: "Disc does not contain valid word at 0x1C"

Post by emu_kidid » Wed Jul 22, 2015 3:09 am

The WASP/Wiikey Fusion can only read up to the first 32GB of any card, that's your issue.
Image
andre104623
Posts: 694
Joined: Wed May 07, 2014 2:24 pm

Re: "Disc does not contain valid word at 0x1C"

Post by andre104623 » Wed Jul 22, 2015 3:19 am

Could be a fake sd card as well. Ebay is flooded with them i got a 128gb microsd card for my cell phone and it was fake. I paid 80 dollars for it so naturally i thought it was real given the fact that the clones were going for 20 dollars. Man what a fight that was that guy i bought it from would not agree with anything so i had paypal handle it.
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

Re: "Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Wed Jul 22, 2015 10:28 am

Well I only loaded about 10 gigs or so, and it still wouldn't read some games.

I probably is a knock off, but it still holds more than 32 gigs. So I'm not sure why it stopped before 10 or so.

Thanks guys :D
novenary
Posts: 1754
Joined: Mon Dec 30, 2013 7:50 am

Re: "Disc does not contain valid word at 0x1C"

Post by novenary » Wed Jul 22, 2015 12:03 pm

emu_kidid wrote:The WASP/Wiikey Fusion can only read up to the first 32GB of any card, that's your issue.
I'm pretty sure it's actually 64GB, and if you use a 128GB card it will only be able to access the first half of it.
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

Re: "Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Wed Jul 22, 2015 9:04 pm

Streetwalker wrote:
emu_kidid wrote:The WASP/Wiikey Fusion can only read up to the first 32GB of any card, that's your issue.
I'm pretty sure it's actually 64GB, and if you use a 128GB card it will only be able to access the first half of it.
That's what I thought too. According to the wiki, it support 64GB. Maybe it supports it, but only uses some of it?
novenary
Posts: 1754
Joined: Mon Dec 30, 2013 7:50 am

Re: "Disc does not contain valid word at 0x1C"

Post by novenary » Wed Jul 22, 2015 10:11 pm

Check the md5 of the files on the card, compare them to the ones you have on your pc. If you have an SD gecko, try to play the games with it. Also check whether your files are fragmented, wasp doesn't support fragmented files and current Swiss builds can't work around it.
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

Re: "Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Wed Jul 22, 2015 11:27 pm

Streetwalker wrote:Check the md5 of the files on the card, compare them to the ones you have on your pc. If you have an SD gecko, try to play the games with it. Also check whether your files are fragmented, wasp doesn't support fragmented files and current Swiss builds can't work around it.

Ok, I'm a noob. What's md5?
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: "Disc does not contain valid word at 0x1C"

Post by emu_kidid » Thu Jul 23, 2015 2:58 am

Yes, my bad, 64GB*. I'd check the MD5's, get a program like HashCalc and run the files from the SD and on the PC through it.
Image
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

Re: "Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Thu Jul 23, 2015 9:24 pm

Aha, I did the MD5 check. One game that didn't work was FZero. On the SD, the MD5 is e20c1c94c13a384d0854e932a1936af9, but the original file is b3e4932731c63b98f0617e6764cc364d.
Same with Wind Waker: SD gives me 1813a2f99340e79bd3e3257ffde27965, but original file is d8e4d45af2032a081a0f446384e9261b. I have no idea what any of this means haha.

So I guess that leads to a cause. But what's the solution?
User avatar
emu_kidid
Site Admin
Posts: 4927
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: "Disc does not contain valid word at 0x1C"

Post by emu_kidid » Thu Jul 23, 2015 11:43 pm

Check your SD card with some testing program or get a refund. It sounds like it's garbage data after a certain point in memory.
Image
User avatar
ZephaniahNoah
Posts: 43
Joined: Wed Jun 03, 2015 6:42 am
Location: Earth

Re: "Disc does not contain valid word at 0x1C"

Post by ZephaniahNoah » Fri Jul 24, 2015 4:54 am

emu_kidid wrote:The WASP/Wiikey Fusion can only read up to the first 32GB of any card, that's your issue.
I have a 64GB SD and after about the sixth game I put on I get the same error. Strange thing is my computer won't read it either.
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: "Disc does not contain valid word at 0x1C"

Post by tueidj » Fri Jul 24, 2015 7:37 am

That sounds like it's an 8GB SD pretending to be a 64GB SD.
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

Re: "Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Fri Jul 24, 2015 10:27 am

Pretty much. I just ran a test on it. 7.7 GByte OK, 54.7 GByte DATA LOST. Shitty SD card. Time for a refund.
tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: "Disc does not contain valid word at 0x1C"

Post by tueidj » Fri Jul 24, 2015 11:25 am

I was talking to the other guy, but yeah. Ouch.
User avatar
ZephaniahNoah
Posts: 43
Joined: Wed Jun 03, 2015 6:42 am
Location: Earth

Re: "Disc does not contain valid word at 0x1C"

Post by ZephaniahNoah » Fri Jul 24, 2015 8:48 pm

tueidj wrote:That sounds like it's an 8GB SD pretending to be a 64GB SD.
Yeah, it looks strange. Crummy printing.
Image
Looked like this when I bought it.
JohnSmith1882 wrote:Pretty much. I just ran a test on it. 7.7 GByte OK, 54.7 GByte DATA LOST. Shitty SD card. Time for a refund.
What software did you use to test it? I want to test mine.
JohnSmith1882
Posts: 17
Joined: Fri Jan 02, 2015 8:15 pm

Re: "Disc does not contain valid word at 0x1C"

Post by JohnSmith1882 » Fri Jul 24, 2015 8:57 pm

ZephaniahNoah wrote:
tueidj wrote:That sounds like it's an 8GB SD pretending to be a 64GB SD.
Yeah, it looks strange. Crummy printing.
Image
Looked like this when I bought it.
JohnSmith1882 wrote:Pretty much. I just ran a test on it. 7.7 GByte OK, 54.7 GByte DATA LOST. Shitty SD card. Time for a refund.
What software did you use to test it? I want to test mine.
H2testw.

It took a few hours for me, so be patience.
User avatar
ZephaniahNoah
Posts: 43
Joined: Wed Jun 03, 2015 6:42 am
Location: Earth

Re: "Disc does not contain valid word at 0x1C"

Post by ZephaniahNoah » Sat Jul 25, 2015 2:49 am

JohnSmith1882 wrote: H2testw.

It took a few hours for me, so be patience.
Ok, thanks.
User avatar
ZephaniahNoah
Posts: 43
Joined: Wed Jun 03, 2015 6:42 am
Location: Earth

Re: "Disc does not contain valid word at 0x1C"

Post by ZephaniahNoah » Sat Jul 25, 2015 3:42 am

Just tested. Only just under 8GB is usable on my 64GB SD.
SavagePencil
Posts: 16
Joined: Sun Jun 19, 2016 5:01 pm

Re: "Disc does not contain valid word at 0x1C"

Post by SavagePencil » Sat Nov 02, 2019 4:32 pm

Hi, I'm also encountering this issue.

I used the latest version of Swiss (685) and ripped Pac-Man Vs. to a known-good FAT32 256GB SD card in an SD2SP2 board. This same card had been used on other flash devices.

When I attempt to open the .GCM, I get the "Disc does not contain valid word at 0x1C".

I've tried copying the .GCM to a smaller, 16GB SD card with the same results in both Serial Port 2 and from a Memory Card port.

I'm using an Action Replay to boot Swiss.
Mr. T
Posts: 16
Joined: Mon Mar 18, 2019 5:05 pm

Re: "Disc does not contain valid word at 0x1C"

Post by Mr. T » Thu Nov 21, 2019 3:12 pm

I as well am encountering the same error. My equipment is an 1024 gb SD card, on an sd2sp booting swiss with a xeno chip and the first few games I encounter can be loaded, however the majority default to this error message.
SavagePencil
Posts: 16
Joined: Sun Jun 19, 2016 5:01 pm

Re: "Disc does not contain valid word at 0x1C"

Post by SavagePencil » Thu Nov 21, 2019 3:52 pm

@Mr. T: I was successful after doing my ripping with CleanRip. https://www.gc-forever.com/forums/viewtopic.php?t=1432

You may also wish to do a "proper" format of your SD card: https://www.retrorgb.com/sdformat.html
User avatar
Papy.G
Posts: 916
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie
Contact:

Re: "Disc does not contain valid word at 0x1C"

Post by Papy.G » Thu Nov 21, 2019 9:18 pm

Still wonder what's the use of such a dumping utility in SWISS while SWISS itself can't use them. :?
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
SavagePencil
Posts: 16
Joined: Sun Jun 19, 2016 5:01 pm

Re: "Disc does not contain valid word at 0x1C"

Post by SavagePencil » Thu Nov 21, 2019 9:52 pm

Papy.G wrote:
Thu Nov 21, 2019 9:18 pm
Still wonder what's the use of such a dumping utility in SWISS while SWISS itself can't use them. :?
??? After ripping them in CleanRip, I'm able to launch them directly from the latest version of Swiss.
User avatar
Papy.G
Posts: 916
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie
Contact:

Re: "Disc does not contain valid word at 0x1C"

Post by Papy.G » Thu Nov 21, 2019 10:34 pm

Of course, CleanRip works, but I was speaking of the dumper in SWISS's file manager. What's the use of those .GCM image files it outputs? There must be a reason why CleanRip's routines hasn't been integrated directly into SWISS, and I wonder why.
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
Post Reply