All your console related questions and answers
4 posts • Page 1 of 1
hi everybody im new to modding and i have found that my xenochip is extremely hard to install on my GCN so i turned to making my own so i can solder via wires.anyways i have been really really confuzed and stressed out on how to properly flash the atmega8L tqfp.the open source project i am using contains a icsp pin.If anybody can clearly explain how to flash these darn things would help me out alot :3
You can also wire the original xeno. Would that be an option for you?
I think you need an ISP programmer. You can get those really cheap on ebay: http://www.ebay.nl/itm/New-USBASP-USBIS ... SwKIpWAgOh
i actually am going to be building my own easier to install xenochip for less experienced modders like myself. i currently have a arduino and a USBtinyISP and i am following a guide on instructables:(http://www.instructables.com/id/Homemad ... -the-Chip/) on how to flash this chip but i was hoping for better understanding on what is going on regarding the flashing processandzlay wrote:You can also wire the original xeno. Would that be an option for you?