Black and white video
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Black and white video
I installed a xenogc properly has orange led on power up. Had to do a pot tweak. My originals play properly with full color. My backup plays in black and white. I also have a region switch installed which made no difference. Thanks in advance
Re: Black and white video
Sounds like your region switch is wired either wrong or shorting.
The switch is unnecessary with a XENO anyways as it makes the GC region free.
I recommend removing the region switch and retesting.
The switch is unnecessary with a XENO anyways as it makes the GC region free.
I recommend removing the region switch and retesting.
Re: Black and white video
Are your "backups" from the PAL region?
Re: Black and white video
Hold B while booting in that case. Most people say hold X/Y to force region although best results from holding B and forcing 60hz.
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Re: Black and white video
so i have 2 gc one has the region mod switch and the other doesnt. so tried 3 different tv, worked only on one perfectly didnt matter what the region was set at. the other gc still only will boot non backups in color but backups are black and white
- Attachments
-
- 23435079_10155228328705852_2807269317510447454_n.jpg
- (135.05 KiB) Not downloaded yet
Re: Black and white video
Did you try forcing 60hz?
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Re: Black and white video
Yes. Does it matter that I'm using a wave bird
Re: Black and white video
Shouldn't. Have you tried to boot up while holding X/Y?
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Re: Black and white video
Maybe your wavebird lag is a problem at boot. Try a different controller
Re: Black and white video
https://www.gc-forever.com/forums/viewtopic.php?t=2623
It's pretty common
It's pretty common
Re: Black and white video
This is not a thing.boredomca wrote:Maybe your wavebird lag is a problem at boot. Try a different controller
Re: Black and white video
Can't rule out the slight possibility. All wireless have lag, it's impossible not to, plus batteries could be low, dirty pins, stray solder bead causing miniscule disruption, ect..
Plausible, probable, anything is possible.
Plausible, probable, anything is possible.
Re: Black and white video
http://www.tested.com/tech/accessories/ ... r-control/ same concept and frequency
Re: Black and white video
You have about 15 seconds during bootup to hold your buttons (the whole duration of the startup animation until it fades to black).boredomca wrote:Can't rule out the slight possibility. All wireless have lag, it's impossible not to, plus batteries could be low, dirty pins, stray solder bead causing miniscule disruption, ect..
Plausible, probable, anything is possible.
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Re: Black and white video
i think i just had the bad luck of the 1st 2 backups were on the list, i burnt another back up and its fine.
Re: Black and white video
Streetwalker wrote:You have about 15 seconds during bootup to hold your buttons (the whole duration of the startup animation until it fades to black).boredomca wrote:Can't rule out the slight possibility. All wireless have lag, it's impossible not to, plus batteries could be low, dirty pins, stray solder bead causing miniscule disruption, ect..
Plausible, probable, anything is possible.
I have not had this luck. Wonder if something's wrong with my test cube now.
Re: Black and white video
I don't have a xeno hooked up anymore, but the apploader (which is where the xeno does its magic) is executed once the GC is actually able to read from the disc, and when you have a backup inserted, that takes a while as it has to spin up twice.
Re: Black and white video
One caveat is Xeno doesn't switch system language. Swiss settings can help the fussy games, or of course put the chip in a Japanese GC if need be.boredomca wrote:Sounds like your region switch is wired either wrong or shorting.
The switch is unnecessary with a XENO anyways as it makes the GC region free.
I recommend removing the region switch and retesting.
Yep I've talked about that quite a bit. Not often witnessed, but it is an inherent technical issue.boredomca wrote:https://www.gc-forever.com/forums/viewtopic.php?t=2623
It's pretty common
50hz from NTSC consoles messes up composite and s-video color.
Re: Black and white video
50 Hz on the NTSC AVE will result in PAL-N colors which need an appropriate decoder.
Re: Black and white video
Does that mean you have a lead on finding what I doggedly asked for?Streetwalker wrote:50 Hz on the NTSC AVE will result in PAL-N colors which need an appropriate decoder.
https://www.gc-forever.com/forums/viewt ... 56&p=38193
Re: Black and white video
No you can't do that, it's not worth it at all when you can just get a PAL unit or use GCvideo. The easiest you can do is get a PAL-N TV. Why you would want to run games in 50 Hz in the first place is beyond me.
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Re: Black and white video
Just installed a gcvideo Pluto and got color but then it goes to a black screen with audio.
Re: Black and white video
Well you made it sound like a PAL-N to PAL decoder exists. But that's way off topic.Streetwalker wrote:No you can't do that, it's not worth it at all when you can just get a PAL unit or use GCvideo. The easiest you can do is get a PAL-N TV. Why you would want to run games in 50 Hz in the first place is beyond me.
Does (past tense if a DOL-001 with removed port) a component cable work correctly on your system? gcvideo uses the gamecube's digital AV lines.Seniorcelica wrote:Just installed a gcvideo Pluto and got color but then it goes to a black screen with audio.
-
- Posts: 37
- Joined: Sun Nov 19, 2017 5:03 pm
Re: Black and white video
yes removed port most other games work very well great picture but animal crossing and mansion show nintendo logo ask if i want pro scan then go black and just hear audio. the gcvideo is installed properly