Hi all
So I've got a gamecube with a xeno installed which boots into swiss
I've got a sd card plugged into either front memory card or sd2sp2, all games boot fine.
I had 3 memory cards I've kept since around 2004 when I first had a gamecube. The gamecube sees all the saves fine
But if I run and game through swiss it doesn't see any save data. What ami doing wrong
Thx for the help
Gamecube running cant see saved games
Re: Gamecube running cant see saved games
Memory Card savepoints are region based, as far as I'm concerned. Is it possible that you're booting out-of-region games?
Re: Gamecube running cant see saved games
Hmm hadn't thought of that. I'll double check that when I get home. Thx for that
Re: Gamecube running cant see saved games
Ok so I got a few games that are Europe region PAL and put them on the SD card, Unfortunately the games still do not see my old saved games but it sees them fine in the main gamecube menu
Re: Gamecube running cant see saved games
First, savefiles are identified to pair to a game, an area, and a version of the said game, so to be used again, you have to be sure you have the game in the same region, and the same version, that you used to create it.
You can see those identifiers in GCMM.
Does SWISS see your saves on your cards?
Do all the save not work? Or only some?
I have a Datel 1023 blocks memcard (curiously labelled as 16MB) that don't show in SWISS if I pull it after boot, or if I boot with another memcard then insert this one, and can be tricky then in game too.
Try to pull-off and reinsert this card after the game is launched.
Check in SWISS's settings if no IPL region is forced.
Also, try to use a game that you don't already have a save for, does it save to your cards?
You can see those identifiers in GCMM.
Does SWISS see your saves on your cards?
Do all the save not work? Or only some?
I have a Datel 1023 blocks memcard (curiously labelled as 16MB) that don't show in SWISS if I pull it after boot, or if I boot with another memcard then insert this one, and can be tricky then in game too.
Try to pull-off and reinsert this card after the game is launched.
Check in SWISS's settings if no IPL region is forced.
Also, try to use a game that you don't already have a save for, does it save to your cards?
DMG/MultiFreq OC/EDGB/EZF Jr, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD
Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)