Working IGR, SDcard related?

[Greatfunky]

Hi Guys !

I recently took out my old gamecube qoob pro equipped to catch up with improvements , flashed the qoob with iplboot r6 and get the SD2SP2 with Swiss r1236.

The result is absolutely stunning , then according to the SD Cards compatibility list, i get a Sandisk Ultra 1TB SDXC that is working nicely, excepting IGR on it.

I couldn't get a working IGR with this card : i tried Swiss on a different SD card Toshiba 4GB , my IGR.dol is swiss.dol renamed , i use exactly the same Swiss config as the other card, i test it with Mario kart Pal version .

With the Toshiba i reboot to Swiss, with the sandisk i reboot to the original gamecube menu.

I can't see any other difference excepting size, brand and Fat format, the Toshiba is fat32 and the Sandisk is exFat.

Do you have any ideas ?

[Diego borella]

you have to use the file as (igr.dol)
small letters...
see if it works

[Greatfunky]

Thanks for the reply , sorry i wrote IGR.dol but it is already igr.dol in small letters on my sd card

[Diego borella]

well... now i realized something...
the shape of the card... i believe if
you must use FAT32 for Sandisk...

[Greatfunky]

Thanks for the info

Of course i can format the Card in FAT32 but i already filled it with 500 Go of games and that took a while, so I would like to be sure before formatting .

AFAIK exFat wasn't supported in older Swiss revisions, everything seems working fine here apart from this issue, someone can confirm FAT32 is needed?

[Extrems]

FAT32 is necessary since v0.6r1236 as Petit FatFs used by the reload stub doesn't support exFAT. It's also necessary for all other applications than Swiss.

[Greatfunky]

Thank you very much for all these informations, the biggest part now is to migrate my isos on the fresh formatted card