Will a compact flash to IDE adapter work?

Support forum for the IDE to EXI adapter
RGB_Gamer
Posts: 6
Joined: Mon Jul 25, 2011 9:15 pm

Will a compact flash to IDE adapter work?

Postby RGB_Gamer » Wed May 22, 2013 11:45 pm

Will a compact flash to IDE adapter work and if so, would it need an external power supply?

User avatar
emu_kidid
Site Admin
Posts: 4278
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: Will a compact flash to IDE adapter work?

Postby emu_kidid » Wed May 22, 2013 11:47 pm

You'd need to wire up 5V (there's a solder pad available for this on the IDE-EXI I believe) and GND, but no external power required.

And yes, it should work.
Image

User avatar
liquitt
Posts: 1748
Joined: Thu Apr 01, 2010 5:43 am
Location: neverland
Contact:

Re: Will a compact flash to IDE adapter work?

Postby liquitt » Sun Jun 02, 2013 1:06 pm

i don't see why it shouldn't, either
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr

we also have a wiki filled with knowledge
http://is.gd/dX58Rm

piratesephiroth
Posts: 52
Joined: Sun Mar 24, 2013 4:59 pm

Re: Will a compact flash to IDE adapter work?

Postby piratesephiroth » Sat Aug 31, 2013 4:29 am

What about as adapter like this?

If this works and the DMA thing gets sorted out nicely, the IDE-EXI will obsolete the SD Gecko... and this adapter will be the best thing ever.

User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Will a compact flash to IDE adapter work?

Postby megalomaniac » Sat Aug 31, 2013 5:52 am

thats a nice find...i was looking for this a while back but none were available...
about time they showed up on the market...

since the description states it also works as a bootable device, then its not dependent on using OS drivers like some other adapters...
so it "should" work...
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving

>>> BadAssConsoles.com <<<

Image Image Image

tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: Will a compact flash to IDE adapter work?

Postby tueidj » Sat Aug 31, 2013 5:58 am

Those things have been around for ages, they're basically just a SD->CF converter (with an IDE header added). I got one in 2009 but it's extremely unreliable for SDHC.

User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Will a compact flash to IDE adapter work?

Postby megalomaniac » Sat Aug 31, 2013 6:02 am

ages?? hmmm...maybe i didnt search properly while looking on ebay...
thanks for the input about their unreliability...you have this same type? has the design changed??
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving

>>> BadAssConsoles.com <<<

Image Image Image

piratesephiroth
Posts: 52
Joined: Sun Mar 24, 2013 4:59 pm

Re: Will a compact flash to IDE adapter work?

Postby piratesephiroth » Sat Aug 31, 2013 6:52 am

ah, that seems to be the only model with a female IDE connector... it would be a shame if it had issues.

tueidj
Posts: 564
Joined: Fri May 03, 2013 6:57 am

Re: Will a compact flash to IDE adapter work?

Postby tueidj » Sat Aug 31, 2013 8:12 am

megalomaniac wrote:ages?? hmmm...maybe i didnt search properly while looking on ebay...
thanks for the input about their unreliability...you have this same type? has the design changed??

I actually have no idea what's inside mine, it's a different design with a sealed block... basically something like this mounted on the board with a couple of LEDs and the IDE and floppy power headers. It looks like it could actually support two CF cards, since on the back there's another row of pads connected to the IDE pins. It also works without the external power being connected at all.

piratesephiroth
Posts: 52
Joined: Sun Mar 24, 2013 4:59 pm

Re: Will a compact flash to IDE adapter work?

Postby piratesephiroth » Sat Aug 31, 2013 8:56 am


tehscene
Posts: 23
Joined: Mon Apr 05, 2010 11:24 pm

Re: Will a compact flash to IDE adapter work?

Postby tehscene » Tue Mar 08, 2016 2:00 pm

I know this is an old topic but I was able to get the following working:

http://www.ebay.com/itm/1pc-New-SD-To-3 ... SwIBBUbVe8

I have the IDE-EXI in slot B

Then its connected with the IDE ribbon to the SD to IDE PCB. I had an old SATA to IDE usb converter with power supply so that is the power supply I used.

Something like this would do for the power supply:

http://www.ebay.com/itm/SATA-PATA-IDE-t ... Sw6BtVVQmz

I'm using a 4gb SD card for testing formatted FAT32 with 32 clusters.

I used swiss 0.4 compressed installed onto qoob pro chip. Swiss sees the SD card without any problems.

Hope this helps somebody.

User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Will a compact flash to IDE adapter work?

Postby megalomaniac » Wed Mar 16, 2016 7:48 am

Image
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving

>>> BadAssConsoles.com <<<

Image Image Image

User avatar
ShockSlayer
Posts: 97
Joined: Sat Feb 05, 2011 7:21 pm

Re: Will a compact flash to IDE adapter work?

Postby ShockSlayer » Wed Mar 16, 2016 7:51 am

Image
Image

User avatar
bentomo
Posts: 51
Joined: Sun Jun 05, 2011 6:39 pm

Re: Will a compact flash to IDE adapter work?

Postby bentomo » Thu Mar 17, 2016 6:19 am

Image
ImageImageImageImageImageImage

User avatar
badsector
Posts: 193
Joined: Tue Aug 20, 2013 12:42 pm
Location: Berlin

Re: Will a compact flash to IDE adapter work?

Postby badsector » Thu Mar 17, 2016 10:59 am

I think it's a great idea, because it is way more complicated and expensive than SD Gecko.

tehscene
Posts: 23
Joined: Mon Apr 05, 2010 11:24 pm

Re: Will a compact flash to IDE adapter work?

Postby tehscene » Fri Jun 17, 2016 3:26 pm

After research I realized what everyone is summarizing that the same can be done cheaper with just an SD Gecko. As an aside, I'm glad to see all of you are into BBC....I mean who isn't right?


Return to “IDE-EXI”

Who is online

Users browsing this forum: No registered users and 3 guests