gc-forever - Gamecube/Wii Forums

WARNING WRITE SUPPORT IS NOT 100% TESTED AND CAN CORRUPT FILES ON THE HARD DISK - Bug fixes should be made eventually.

This topic will contain all the homebrew which supports the IDE-EXI.

All will share the same base interface code so and all source will be provided bundled with the binaries.

Most are placeholders but eventually they should all be available with full IDE-EXI support

MPlayer CE (Media Player Homebrew for Gamecube)
Limitations:
- Maxes out at about the 1500kbps mark in combined video+audio so keep it low res for now until we have DMA on the IDE-EXI worked out
Instructions:
- Extract contents to the root of your IDE HDD
- Plug in the IDE-EXI into either Slot A or Slot B
- Boot up mplayer.dol using your favorite loader
- Select GC SD Slot A or B (this will point to ide-exi instead of SD)
- Enjoy!

mplayer-653-ide-exi.zip

(3.12 MiB) Downloaded 1410 times

Cube64
CubeSX

FCE Ultra GX 3.2.3 for Gamecube
Instructions:
- Use as normal, except now you can use the IDE-EXI as a device - saving works too

fceugc-ide-exi.7z

(4.68 MiB) Downloaded 1559 times

GenPlusGX 1.4.1 for Gamecube
Instructions:
- Click on Load SD and it'll load from the IDE-EXI instead - saving works too

genplus-gx-ide-exi.7z

(2.63 MiB) Downloaded 1417 times

SMSPlusGX

Snes9xGX 4.2.5 for Gamecube
Instructions:
- Use as normal, except now you can use the IDE-EXI as a device - saving works too

snes9x-gx-ide-exi.7z

(4.78 MiB) Downloaded 1525 times

VBA GX 2.2.2 for Gamecube
Instructions:
- Use as normal, except now you can use the IDE-EXI as a device - saving works too

vba-wii.7z

(4.52 MiB) Downloaded 1437 times

WiiMC (GC Port)

If anyone can name anything I've missed that is available for GC, let me know.

http://code.google.com/p/hugo-gx/
http://code.google.com/p/quake-gamecube/
LsDoom - http://www.eurasia.nu/modules.php?name= ... =GC_LsDoom
http://code.google.com/p/szigoy/
Chip 8 Emulator - http://www.zophar.net/consoles/gamecube ... lator.html
http://code.google.com/p/neopop-gx/
https://neopop-gx.bountysource.com/
NeoCD Redux v0.1.52A - softdev
Atari 2600 Emulator - http://sourceforge.net/projects/stella/files/
http://www.eurasia.nu/modules.php?op=mo ... oad&cid=55 - more games.

GC ports of following would be nice also ;-P if possible.
http://code.google.com/p/wiidoom/
http://code.google.com/p/cubiic/
http://code.google.com/p/goblins-cube/

heh, that's a lot of stuff!

Always keeping you busy ;-P

P.S. I've got to update all of the above emulators - the code had a pretty serious bug that only made it work on a select few hdd's

Should be happening soon.

added MPlayer CE for ide-exi.

I don't get it, no one ever spell MPlayer CE right.

there we go.

I have been testing the MPlayer CE for IDE-EXI.
I keep having to replace the mplayer installation folder as it becomes corrupt in some way and will not boot the dol in swiss.
At first I thought it may have been due to the DMA and 1500kbps max of audio/video as mentioned in first post.
But I have just launched mplayer through IDE, swiss 0.1r33 Played only one track of music and then went to quit mplayer. After reboot of the console and loading up swiss I find that when loading Mplayer.dol it gives a black screen with install directory error. Folder has to be replaced with the original.

This is my experience and i have not tested any other harddrive only a Hitachi Deskstar IDE 60gb 7200rpm

Still great work, keep it up

the write code still has bugs that I need to iron out