Power Source

Support forum for the IDE to EXI adapter
Benni
Posts: 259
Joined: Mon Oct 17, 2011 7:45 am

Re: Power Source

Post by Benni » Sat Oct 29, 2011 7:37 am

Can you make a picture on which we can see where the wires are connected?

Thank You
yamaharacer
Posts: 444
Joined: Mon Apr 05, 2010 4:11 pm
Location: Germany

Re: Power Source

Post by yamaharacer » Sat Oct 29, 2011 9:50 am

Image


you only have to connect the wires to these points. red wire is 5V, yellow is 12V and the black ones are ground.
Benni
Posts: 259
Joined: Mon Oct 17, 2011 7:45 am

Re: Power Source

Post by Benni » Sat Oct 29, 2011 8:31 pm

SURE?

The Picture looks different!
12V is red
5V is Orange
...
OH, my mistake...
You are talking about the wires...

I found this one:
http://kyorune.com/modding/article.php?id=16
They say 12V is bridging Pin 19 and 21!?
User avatar
Burbruee
Posts: 99
Joined: Wed Jul 28, 2010 5:41 pm

Re: Power Source

Post by Burbruee » Fri May 18, 2012 5:59 pm

I'm interested in doing this mod, right now I always have to keep my gamecube right next to my PC which is not optimal.. Is yamaharacer's picture correct?
.
User avatar
Burbruee
Posts: 99
Joined: Wed Jul 28, 2010 5:41 pm

Re: Power Source

Post by Burbruee » Sat May 19, 2012 12:03 am

And done :)

Image

Image

Thanks. ^^
.
User avatar
SouLSLayeR
Posts: 73
Joined: Sun Apr 22, 2012 10:36 pm
Location: Greece

Re: Power Source

Post by SouLSLayeR » Sat May 19, 2012 12:11 am

Hey, it looks nice!

I'll probably go with this after I get my IDE-EXI working.
RGB_Gamer
Posts: 6
Joined: Mon Jul 25, 2011 9:15 pm

Re: Power Source

Post by RGB_Gamer » Wed May 22, 2013 11:41 pm

I know this is an old topic, but what about a power supply for a 2.5" HDD. Or what about a compact flash to IDE adapter
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Power Source

Post by megalomaniac » Thu May 23, 2013 12:00 am

just connect the proper power adapter...

2.5" and CF consume less power than some 3.5" HDDs...so its ok to still use GC power supply
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
User avatar
GameCube2
Posts: 48
Joined: Thu Apr 25, 2013 2:30 pm
Location: Pennsylvania

Re: Power Source

Post by GameCube2 » Sat Aug 17, 2013 12:38 pm

i am wondering if my IDE to sata adapter would work for this.
PlayStation 3 CFW 4.55 500GB - [Sony 3] - {HACKED}
PlayStation 4 1.72 500GB [Sony 4]
PlayStation Portable Slim CFW 5.00 M33-6 (Silver) - [Sony Jr]
DreamCast (White) - [Casper]
Wii 4.3U (White) - (Mar10)
Sig Update: 5/28/14
User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: Power Source

Post by megalomaniac » Sat Aug 17, 2013 7:03 pm

a lot of sata adapters have been tested and worked fine
here is a post from years ago with a lot of great results...i also own some of the adapters listed in the post and the adapters can usually be found for 2$ on ebay
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving
>>> BadAssConsoles.com <<<

Image Image Image
Post Reply