Support forum for the IDE to EXI adapter
-
hpxhpx
- Posts: 21
- Joined: Wed Oct 20, 2021 5:51 am
Post
by hpxhpx » Sat Oct 23, 2021 7:15 am
many thanks
i have download the V2 FW, will start for order some PCB, If any suggestion please free feel for share
-
hpxhpx
- Posts: 21
- Joined: Wed Oct 20, 2021 5:51 am
Post
by hpxhpx » Sat Nov 06, 2021 12:59 am
two board already completed the components soldering
programmer on the way ,waiting programmer arrive for FW programming
-
Attachments
-
- IDE-EXI 2.jpg
- (276.27 KiB) Not downloaded yet
-
- IDE-EXI 1.jpg
- (265.74 KiB) Not downloaded yet
-
hpxhpx
- Posts: 21
- Joined: Wed Oct 20, 2021 5:51 am
Post
by hpxhpx » Thu Dec 09, 2021 11:37 am
seems my subject was closed and unread so i'm here and need your help
Dears
i got problem for use IDE-EXI, Please any one help me you if have any idea
I finished my IDE-EXI board build but it can't working
use Xilinx DLC9LP usb programmer for programmed IDE-EXI-V2 and the programming was succeeded
my connection as the setup flow picture (NGC-->IDE-EXI Board-->80pins IDE cable-->IDE to SATA board-->HDD)
HDD Format FAT32, Copy Swiss 1086 to HDD
By the way ,my NGC can boot by sd2sp2
picture part1
-
Attachments
-
- IDE-EXI fail 2.jpg
- (149.54 KiB) Not downloaded yet
-
- IDE TO SATA BOARD TOP.jpg
- (301.77 KiB) Not downloaded yet
-
- IDE TO SATA BOARD BOTTOM.jpg
- (430.83 KiB) Not downloaded yet
-
- Erase succeeded.jpg
- (239.21 KiB) Not downloaded yet
-
- can't boot from IDE-EXI.jpg
- (208.71 KiB) Not downloaded yet
-
Papy.G
- Posts: 924
- Joined: Mon Mar 04, 2019 6:14 am
- Location: France, Occitanie
-
Contact:
Post
by Papy.G » Thu Dec 09, 2021 11:57 am
Are you sure your boot method can boot off IDE-EXI?
Try to boot SWISS off your SP2 device first, then see if it can see your hd.
Check github for updates.
-
hpxhpx
- Posts: 21
- Joined: Wed Oct 20, 2021 5:51 am
Post
by hpxhpx » Thu Dec 09, 2021 12:23 pm
many thanks Sir
the IDE-EXI can detected from swiss by boot from SP2
seems i don't know how to use IDE-EXI Board
i just format HDD FAT32 and copied swiss file to HDD same as SP2
-
Attachments
-
- IDE-EXI Detected by boot swiss of SP2.jpg
- (232.53 KiB) Not downloaded yet