IDE-EXI Gerbers, Design Files, BOM, PDF and Program Files

Support forum for the IDE to EXI adapter
User avatar
liquitt
Posts: 1748
Joined: Thu Apr 01, 2010 5:43 am
Location: neverland
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby liquitt » Fri Apr 06, 2012 8:42 am

so even in times of WODE and WKF this seems to be on people's wishlist :)
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr

we also have a wiki filled with knowledge
http://is.gd/dX58Rm

conanac
Posts: 4
Joined: Sun Feb 13, 2011 1:31 am

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby conanac » Sun Apr 15, 2012 8:27 pm

If you make another batch, count me in for one (if it is cheap enough, I could take two so I have a spare).
Thanks.

User avatar
SouLSLayeR
Posts: 73
Joined: Sun Apr 22, 2012 10:36 pm
Location: Greece

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby SouLSLayeR » Sun Apr 22, 2012 10:40 pm

Have you considered maybe selling kits?
Unpopulated pcb + flashed CPLD.

This isn't for the price difference, but mainly the DIY part :3

User avatar
atari2atari
Posts: 13
Joined: Wed May 02, 2012 4:41 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby atari2atari » Thu May 03, 2012 3:37 pm

I'd be in for at least two adapters myself - - I am eager to take full advantage of what Swiss has to offer!

-a2a

BuckoA51
Posts: 29
Joined: Thu Aug 02, 2012 6:17 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby BuckoA51 » Thu Aug 02, 2012 6:20 pm

I just found out about this today, I'd very much like to get one of these adapters to play with, I'm incompetent when it comes to soldering so I'd have to buy one, if any are available please let me know!

User avatar
humerf
Posts: 10
Joined: Fri Jun 10, 2011 1:36 am

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby humerf » Tue Aug 07, 2012 12:26 pm

emu_kidid wrote:I have it at about $1200 for 100 fully made if I re-use the same factory as before (excluding postage fees for the xilinx back and fourth from supplier to factory and then the ide-exi's themselves to me and to you), so about $15-$20 each.

I saw here in Brazil easy 50 units in 20/30 days at most if you can make some units, and an attractive price I picked up some pieces (one course for me, for my "EXI-IDE diy " not working, I have done something wrong) then tell me why this is true if "private messages" ok .
and also if you can only drive a pcb for me I thank you, so I can resoldar xilinx (blue-chip v9/v10) in another pcb
thanks

=========================================
Another question
I just did a test on my door "DB25" and pin 15 (Vcc) brand 5v instead of 3.3v would be right to be programmed Xilinx right?
pin 13 - 1.6V +/-

Will this be the error of my EXI-IDE not recognized by the program and so can not plan it, it always gives "cable failure"?

I do own a cable?
I made the cable and simple as the diagram posted only with a 4k7 resistor.
use windows xp 32bit

I can use this diagram to make the cable and program or not?

http://www.mikrocontroller.net/attachme ... x-JTAG.jpg

or

http://img708.imageshack.us/img708/849/ ... wiring.jpg


Help ! Please !!

======================

could make the cable to be recognized, I reduced the size of the cable and used an external power from a battery (2032) 3.3v, only now it's time to "program" it gives this error:


Welcome to iMPACT
iMPACT Version: 10.1
// *** BATCH CMD : loadProjectFile -file "C:\Documents and Settings\Administrador\Desktop\gcide\exi2ide.ipf"
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
LPT base address = 0378h.
ECP base address = 0778h.
Cable connection established.
INFO:iMPACT:2676 - base class function getDeviceChain(index) is called.
INFO:iMPACT:2676 - base class function getDeviceChain(index) is called.
INFO:iMPACT:2676 - base class function getDeviceChain(index) is called.
'1': Loading file 'C:/Documents and Settings/Administrador/Desktop/gc_ide.jed' ...
done.
INFO:iMPACT:1777 -
Reading C:/Xilinx/10.1/ISE/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
Active mode is BS
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : Program -p 1 -e -v
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1': Device IDCODE : 00001111111111111111111111111111
INFO:iMPACT:1579 - '1': Expected IDCODE: 00001001011000001000000010010011
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
PROGRESS_START - Starting Operation.

which may be?
Please help !!!!!!

zeldafan1993
Posts: 10
Joined: Tue Oct 30, 2012 6:05 am

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby zeldafan1993 » Tue Oct 30, 2012 7:04 am

BuckoA51 wrote:I just found out about this today, I'd very much like to get one of these adapters to play with, I'm incompetent when it comes to soldering so I'd have to buy one, if any are available please let me know!

i would also like 1 or 2 if its possible??

User avatar
liquitt
Posts: 1748
Joined: Thu Apr 01, 2010 5:43 am
Location: neverland
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby liquitt » Tue Oct 30, 2012 7:08 am

there might be another batch soon. until then: diy or try your luck in the marketplace.
please search before you ask - a lot has been discussed already!
(or use google with "site:gc-forever.com *term*")
http://is.gd/MDmZcr

we also have a wiki filled with knowledge
http://is.gd/dX58Rm

User avatar
emu_kidid
Site Admin
Posts: 4278
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby emu_kidid » Fri May 10, 2013 1:47 am

These were good times :)
Image
Attachments
ide-exi.jpg
(93.76 KiB) Not downloaded yet
Image

kel01
Posts: 146
Joined: Fri Feb 18, 2011 10:45 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby kel01 » Fri May 10, 2013 11:40 am

Wow. It must have taken a while for you to solder all those 40 pin IDE headers on.

User avatar
emu_kidid
Site Admin
Posts: 4278
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby emu_kidid » Sat May 11, 2013 12:11 am

I had a little fan going for air extraction, but I really felt like a chinese factory worker for a little while :(
Image

User avatar
wii_HD
Posts: 264
Joined: Tue Mar 08, 2011 8:27 pm
Location: United KIngdom

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby wii_HD » Sat May 11, 2013 6:46 am

emu_kidid wrote:I had a little fan going for air extraction, but I really felt like a chinese factory worker for a little while :(


foxconn want to hire you.
Playing - Super Mario Sunshine - DariusBurst CS - Hotline Miami 2 - Rpi2 Lakka - X360 BurnOut Paradise City

andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby andre104623 » Thu Aug 28, 2014 9:56 pm

I want to thank emu-kidid for this:

IMG_20140828_175536.jpg
(1.69 MiB) Not downloaded yet

User avatar
emu_kidid
Site Admin
Posts: 4278
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby emu_kidid » Thu Aug 28, 2014 10:52 pm

Nice, I don't think there is much demand these days though sadly.
Image

andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby andre104623 » Thu Aug 28, 2014 10:57 pm

emu_kidid wrote:Nice, I don't think there is much demand these days though sadly.

Well emu I made a topic about making a third batch and if there is a demand and everything goes as planned I'm going to donate 10% of my profits to your site

andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby andre104623 » Thu Sep 18, 2014 8:05 pm

IMG_20140918_154917.jpg
(1.29 MiB) Not downloaded yet

IMG_20140918_154926.jpg
(1.38 MiB) Not downloaded yet

IMG_20140918_154938.jpg
(1.59 MiB) Not downloaded yet


These are about 75% complete. I have completed 3 now I have 3 left to do. Tonight hotair reflow xilinx chips and flash then test. Thats it after that on to bigger and better things (GC video!!). This was a fun project and it will be missed thanks everyone

User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby megalomaniac » Thu Sep 18, 2014 8:26 pm

You might want to get rid of C1 if you run into problems removing the PCB from the card slot
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving

>>> BadAssConsoles.com <<<

Image Image Image

andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby andre104623 » Thu Sep 18, 2014 8:39 pm

megalomaniac wrote:You might want to get rid of C1 if you run into problems removing the PCB from the card slot

I thought it was for flashing the chip only then it could be removed. yeah I noticed I got stuck under the memory card slot :lol:

andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby andre104623 » Sat Sep 20, 2014 12:47 am

Here are two done and flashed now for testing and remove the JTAG pins. Hot air reflow is so easy for these small chips total build time 45 min to 1 hour each PCB

IMG_20140919_204229.jpg
(1.35 MiB) Not downloaded yet

User avatar
emu_kidid
Site Admin
Posts: 4278
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby emu_kidid » Sun Sep 21, 2014 1:28 pm

You don't need to solder pins in for jtag, just use a header on your programmer and hold it there whilst programming.
Image

andre104623
Posts: 642
Joined: Wed May 07, 2014 2:24 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby andre104623 » Sun Sep 21, 2014 9:00 pm

emu_kidid wrote:You don't need to solder pins in for jtag, just use a header on your programmer and hold it there whilst programming.

Oh well its a little late for that but I'll remember that when I'm doing the GCvideo project. I have a xilinx usb programmer I should know this but I'll be fine flashing the GC video with this programmer correct

User avatar
megalomaniac
Posts: 2480
Joined: Sun Aug 21, 2011 5:33 am
Location: Drunk in Texas
Contact:

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program File

Postby megalomaniac » Mon Sep 22, 2014 12:28 am

andre104623 wrote:I have a xilinx usb programmer I should know this but I'll be fine flashing the GC video with this programmer correct


you can use your xilinx programmer if you plan to convert the code over for xilinx....
else you might want to try using a lattice programmer with the lattice IC used in the design...
emu_kidid wrote: beer is like WD40 for megalomaniac's brain, gets the gears moving

>>> BadAssConsoles.com <<<

Image Image Image

Booradley98
Posts: 1
Joined: Tue Mar 14, 2017 8:34 pm

Re: IDE-EXI Gerbers, Design Files, BOM, PDF and Program Files

Postby Booradley98 » Tue Mar 14, 2017 8:38 pm

I would be willing to pre-order 2 or 3 adapters if there is another batch going around.


Return to “IDE-EXI”

Who is online

Users browsing this forum: No registered users and 3 guests