ide/exi doesnt work

Support forum for the IDE to EXI adapter
Post Reply
yamaharacer
Posts: 444
Joined: Mon Apr 05, 2010 4:11 pm
Location: Germany

Re: ide/exi doesnt work

Post by yamaharacer » Mon Mar 05, 2012 5:51 am

ok that says also why my other bluechip that I have build a year ago never worked.
User avatar
humerf
Posts: 10
Joined: Fri Jun 10, 2011 1:36 am

Re: ide/exi doesnt work

Post by humerf » Sat Aug 11, 2012 9:49 am

yamaharacer wrote:ok that says also why my other bluechip that I have build a year ago never worked.
my : Buy : blue chip 10 / pcb v9

could make the cable to be recognized, I reduced the size of the cable and used an external power from a battery (2032) 3.3v, only now it's time to "program" it gives this error:


Welcome to iMPACT
iMPACT Version: 10.1
// *** BATCH CMD : loadProjectFile -file "C:\Documents and Settings\Administrador\Desktop\gcide\exi2ide.ipf"
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
LPT base address = 0378h.
ECP base address = 0778h.
Cable connection established.
INFO:iMPACT:2676 - base class function getDeviceChain(index) is called.
INFO:iMPACT:2676 - base class function getDeviceChain(index) is called.
INFO:iMPACT:2676 - base class function getDeviceChain(index) is called.
'1': Loading file 'C:/Documents and Settings/Administrador/Desktop/gc_ide.jed' ...
done.
INFO:iMPACT:1777 -
Reading C:/Xilinx/10.1/ISE/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
Active mode is BS
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : Program -p 1 -e -v
INFO:iMPACT:583 - '1': The idcode read from the device does not match the idcode in the bsdl File.
INFO:iMPACT:1578 - '1': Device IDCODE : 00001111111111111111111111111111
INFO:iMPACT:1579 - '1': Expected IDCODE: 00001001011000001000000010010011
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
PROGRESS_START - Starting Operation.

which may be?


Please help !!!!!!

if I can not run it this week I will sell my gamecube and abandon this "EXI diy" because I'm losing too much time trying something that does not work !
Post Reply