Swiss 0.3

YouTube · Post by **emu_kidid** » Sat Feb 09, 2013 5:44 am

strange, is it the same card or another? I tried the same card (but modified files on the PC) and it was showing the new list. might be a SD vs SDHC change I haven't catered for.

corenting · Post by **corenting** » Sat Feb 09, 2013 8:46 am

Yes this is not the same card : i'm swapping a SD for a SDHC. Unfortunatelly i can't test swapping a SD for another SD because i have only one SD card.

Ikthias · Post by **Ikthias** » Fri Mar 08, 2013 8:50 am

Sorry new to forum but where can i get r198? i have r174

Gamecube: DOL-001
Chip: Qoob Pro
Accessories: BBA and SD gecko

megalomaniac · Post by **megalomaniac** » Fri Mar 08, 2013 9:15 am

only way to get versions which have no official release is to compile them yourself...

Ikthias · Post by **Ikthias** » Fri Mar 08, 2013 9:19 am

Oh ok, thanks for telling me, ill just wait lol. im having no problems with r174 but like to keep it updated.

Nukatha · Post by **Nukatha** » Fri Mar 08, 2013 11:12 pm

Emu_kidid (and everyone else continuing to work on Swiss):
thanks again for compiling both ways (compressed and not)
I continue to boot homebrew the old fashioned way, through PSOload (PSUload doens't like me for some reason), and even though I don't post here often, I just thought I'd let you know that your work continues to be appreciated!

SrTommy · Post by **SrTommy** » Mon Mar 25, 2013 11:27 pm

Hi! It's been a long time since I used my Gamecube. Today I was going to test some games with the new Swiss 0.3 (I didn't use the Gamecube since Swiss 0.2 r94) and I have a problem. I have an IDE-EXI adapter and Swiss 0.2r94 still works perfect, but I tried to use a lot of Swiss 0.3 (r189, r210 and even the stable release r174) and neither recognize the HDD. They showed me an empty folder and nothing more

Do I have to do something so Swiss 0.3 can recognize the HDD? Thanks!!!

megalomaniac · Post by **megalomaniac** » Tue Mar 26, 2013 12:03 am

keep using r94 for ide-exi

i ran some test about a month ago...
here are my results:

SrTommy · Post by **SrTommy** » Tue Mar 26, 2013 12:41 am

megalomaniac wrote:keep using r94 for ide-exi

i ran some test about a month ago...
here are my results:

Oh! That's a pity

. I thought emu_kidid fixed the IDE-EXI problems. I'll have to wait then.

Anyway thanks for the quick answer

megalomaniac · Post by **megalomaniac** » Tue Mar 26, 2013 12:45 am

haha, actually, thanks to you also...
i was using your videos as reference to figure out what i was doing wrong when i was first testing ide-exi...
i realized all your videos were using older swiss versions, and with some advice from others, i tried the older swiss and had no problems...

so, thanks for the videos..

SrTommy · Post by **SrTommy** » Tue Mar 26, 2013 1:04 am

megalomaniac wrote:haha, actually, thanks to you also...
i was using your videos as reference to figure out what i was doing wrong when i was first testing ide-exi...
i realized all your videos were using older swiss versions, and with some advice from others, i tried the older swiss and had no problems...

so, thanks for the videos..

Videos? I don't remember record videos

. I only record one video in spanish to some guy who asked me in argentina how works Swiss. Are you sure that it was me? I hope I don't have alzheimer

lol

megalomaniac · Post by **megalomaniac** » Tue Mar 26, 2013 3:30 am

maybe it was only one video...

inukaze · Post by **inukaze** » Mon Apr 01, 2013 5:03 pm

If possible , make a "Selector Menu" for Swiss Versions ??? , for example , the user , make a folder called "swiss" , inside the folder , the files called "0.1-r52" , "0.2-r94" , etc . . .

I say that , because , the result of "megalomaniac" ( download/file.php?id=894 ) , and Because , i remember , when i try to play "Mario Sunshine" with "0.2-r12X?" (Dont remenber the version) , the game dont work , but when i use the version "0.1-r92" (or something like this) , the game works perfect

Its just a suggestion , and make a file called "0.1-r92.cfg" (or something like that) for make a list the games "Excluded" (Dont show in the list , after the user test by itself , and saw the games works or not) . in the first run , all games displayed , and included an option for "Dont Display this Game" , in the specific version of swiss

Thanks :=) for readme , and sorry for my bad english

megalomaniac · Post by **megalomaniac** » Mon Apr 01, 2013 5:33 pm

no need for a selector menu

you can use any swiss version to load any other swiss version....
so keep all the different versions on SD card and your good

YouTube · Post by **emu_kidid** » Tue Apr 02, 2013 12:32 pm

You're*

P.S. WiFi BBA? :p

wishmasterf · Post by **wishmasterf** » Sat Apr 27, 2013 4:18 pm

I know own a SD Media Launcher. On my 2GB SD Card i copied swiss.dol only (on root dorectory). i started the sd medialauncher (the CD/DVD) after that i tried to start swiss. I tried vips, compressed end uncompressed. Evertime i try i get an no Signal on my TV.

EDIT: Seams my SD - Card is not compatible with sd-medialauncher. Loading games using that card works. Any idears?

YouTube · Post by **emu_kidid** » Thu May 23, 2013 1:31 pm

Fixed an issue which was stopping audio streaming games from working from DVD-R (for no modchip users).

Also, someone with a 2002/04/02 drive should test out reading backup media without a XenoGC. (mega)

detonatorinf · Post by **detonatorinf** » Thu May 23, 2013 5:40 pm

I would like to report a problem with the game The Legend of Zelda Collector's Edition.

The game patches and runs fine with swiss 0.3 r174. But in later versions a crash occurs after the new patching method (shows a black screen with lots of information).

Tested with r204 and r214.

Ashen · Post by **Ashen** » Fri May 24, 2013 6:50 am

Would be sweet if we could have the option to set whether we want 480p or 480i on startup in the swiss.ini. I know there is a ticket in for this already, and an attempt to fix the issue was made by holding L in @ boot, but I didn't see it suggested to be part of the .ini file. I'm trying to get my new test cube setup in my new work/test/chill room, unfortunately the TV I have in there is an old sony CRT and doesn't support progressive scan. :/

Is it possible to have a pre built swiss.ini on the WKF SD card? I know the WKF slot is read only, but can we manually edit one and stick it on there? I suppose I could just try it, but atm its easier to just ask.

alzen · Post by **alzen** » Fri May 24, 2013 11:57 pm

How to get new build of Swiss? Are there some server I can find them or do i need to compile myself(in that case, any how-to maybe)?

megalomaniac · Post by **megalomaniac** » Sat May 25, 2013 12:14 am

you want the latest, you have to compile

http://devkitpro.org/wiki/Getting_Started/devkitPPC

wishmasterf · Post by **wishmasterf** » Sat May 25, 2013 3:46 pm

Now i tried r215 and i cant swap sd-card.

I do following (with r174 it works):

* Boot with sd-medialauncher
* Start swiss
* swap sd-card in medialauncher sd-card-adapter
* get the content of the boot-sd-card shown

Hope it is the right place to post problems and understandable.

GillBert · Post by **GillBert** » Sun May 26, 2013 5:18 pm

I haven't been playing my GC for a while, but now I'd like to play Ikaruga via SD Card.

I'm not able to play it by using Swiss versions 0.2 and above, I tried even the latest 0.3 rev215. The game starts fine but when I choose "start game" it automatically returns to the previous screen (press start). I've tried many config options in the Swiss but no results.

I can play this game by using Swiss 0.1 with the SD formatted in FAT16. My GC has a Qoob Pro 1.3c installed and I've already tried many config options in the modchip, but nothing have changed.

Any clue for this issue?

Thanks in advance!

YouTube · Post by **emu_kidid** » Sun May 26, 2013 10:25 pm

Did you disable audio streaming via the game config menu? It's been a while since I tried Ikaruga

GillBert · Post by **GillBert** » Mon May 27, 2013 4:16 pm

Yes I did it. I also disabled streaming fix in the Qoob config.

I think it couldn't be a bad rip, right? Since I can run it via DVD and Swiss 0.1.

Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3

Re: Swiss 0.3