swiss on a game cube

[aerios169]

hii friends , well my story is that my cousin installed a chip on his gamecube , now his game cube can run mini dvds. But he wants to use swiss . we used GC Bootable Disc GUI to burn a swiss.dol on a mini dvd with the option Add/Change Boot DOL . well in that step the game cube acepts the dvd and ejecute swiss but on the imagen there says a menssage saying "reading SD on slot B ( it get frezed )" i dont know which are the archives to i have to put on the sd gekos . Some boddy can help me ?

[Air Conditioner]

Try the older version of swiss. I had the same problem.

[aerios169]

well i am using swiss rev 174 =/ , uhmm i dont have more disc to check but do you know which are the archives there have to be on the sd geckos ?

[emu_kidid]

nothing should really be on the SDGecko. If it gets stuck on "Reading SD on Slot B" and there is nothing in that slot then make sure there's no internal modifications to the slot/etc, as Swiss is seeing it as something inserted and is trying to endlessly initialize the non-existent card.

[aerios169]

well in that case i have to copy one ISO on the sd geckos and that is all ? thanks for the help