Page 5 of 33
Re: Swiss Nightly Build
Posted: Wed Mar 19, 2014 1:11 pm
by iamdablasta
SpaceBacon wrote:Tried it. Didn't affect the problem. r256 uncompressed dol gets me the error, compressed dol gets me no signal.
I don't think it's just a video output problem with the "no signal" because it's not "out of range" or something like that and swiss.ini is not created which at least in the older versions happens on startup. But in case it makes any difference I'm using RGB scart.
I also tried fully reformatting my SD card just in case.
Exception screen attached if it helps any.
EDIT: So here's something interesting. If I load Swiss 0.3 r174 I can then load any version of Swiss I want from there and it will work. But I still can't get games to work on the new builds. Trying Twilight Princess with r256 now and am getting that black screen that flashes a bit at times into a lighter shade of black for some reason.
I got that exception when my WKF was inproperly wired.
What is your mod? I could never get post-174 to load from dvd, had to load 174 and then the new version.
Re: Swiss Nightly Build
Posted: Wed Mar 19, 2014 1:33 pm
by SpaceBacon
My console is not modded. I have SD Media Launcher by Datel (launcher software on DVD + SD card adapter in the memory card slot to launch stuff from).
Re: Swiss Nightly Build
Posted: Wed Mar 19, 2014 10:33 pm
by emu_kidid
I'll replicate your setup tonight and test.
Re: Swiss Nightly Build
Posted: Thu Apr 03, 2014 10:06 pm
by emu_kidid
r258 code is up but I haven't had a chance to try it via SDML yet, so I suspect it will still be broken.
Re: Swiss Nightly Build
Posted: Thu Apr 03, 2014 10:13 pm
by szczuru
emu_kidid wrote:r258 code is up but I haven't had a chance to try it via SDML yet, so I suspect it will still be broken.
r258 changelog?
Re: Swiss Nightly Build
Posted: Thu Apr 03, 2014 10:54 pm
by emu_kidid
Re: Swiss Nightly Build
Posted: Fri Apr 04, 2014 1:17 am
by megalomaniac
szczuru wrote:
r258 changelog?
changelog is included in the package
Re: Swiss Nightly Build
Posted: Tue Apr 22, 2014 9:03 pm
by robneal81
I'm really sorry for the stupid question, but which file in this package should I use if I want to burn swiss to a disc, the .dol or .iso? Currently my GC has a XenoGC and plays backed up dvdr games fine, but I was hoping to play around with Swiss' forced 16:9 and progressive modes. Should I just burn one of those files to a disc, boot to Swiss, then swap with my game?
Re: Swiss Nightly Build
Posted: Tue Apr 22, 2014 9:23 pm
by novenary
Yes, burn the ISO then you can swap discs as you like.
Re: Swiss Nightly Build
Posted: Tue Apr 22, 2014 10:21 pm
by robneal81
Worked perfect, thanks so much!
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 5:44 am
by brooksyx
How do I burn the swiss iso so I can boot it with my xenogc chip? I tried to resize it with wiped GCM fixer but no luck.
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 6:09 am
by szczuru
There is no need to resize. JUST burn - it'll burn whole 1,4GB
Sent via Tapatalk
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 6:45 am
by brooksyx
szczuru wrote:There is no need to resize. JUST burn - it'll burn whole 1,4GB
Sent via Tapatalk
I tried, it didn't work. Used the same method to burn retail games successfully.
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 11:31 am
by theclaw
brooksyx wrote:szczuru wrote:There is no need to resize. JUST burn - it'll burn whole 1,4GB
Sent via Tapatalk
I tried, it didn't work. Used the same method to burn retail games successfully.
Don't you need to add your own padding? Swiss isn't officially distributed at full disc size.
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 12:07 pm
by szczuru
I've burned r256 iso using IMGBurn and it works fine on XenoGC. Iso is from 1st post.
Sent via Tapatalk
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 6:29 pm
by brooksyx
Ill give a try again when I get some more discs. Still waiting on my wiikey sd adapter anyways so wouldn't do much good right now.
Thanks
Re: Swiss Nightly Build
Posted: Sat Apr 26, 2014 8:48 pm
by iamdablasta
theclaw wrote:brooksyx wrote:szczuru wrote:There is no need to resize. JUST burn - it'll burn whole 1,4GB ;)
Sent via Tapatalk
I tried, it didn't work. Used the same method to burn retail games successfully.
Don't you need to add your own padding? Swiss isn't officially distributed at full disc size.
I've used two different methods for padding:
1. Imgburn finish dvd. Automatically padded the rest. This worked.
2. GCN resizers etc, hit and miss for me. Worked some games, didn't most games.
Re: Swiss Nightly Build
Posted: Sun Apr 27, 2014 6:22 am
by brooksyx
iamdablasta wrote:
I've used two different methods for padding:
1. Imgburn finish dvd. Automatically padded the rest. This worked.
2. GCN resizers etc, hit and miss for me. Worked some games, didn't most games.
Where is the setting in imgburn to finish the dvd. Did a quick check and could not seem to find it.
Re: Swiss Nightly Build
Posted: Sun Apr 27, 2014 11:24 am
by iamdablasta
brooksyx wrote:iamdablasta wrote:
I've used two different methods for padding:
1. Imgburn finish dvd. Automatically padded the rest. This worked.
2. GCN resizers etc, hit and miss for me. Worked some games, didn't most games.
Where is the setting in imgburn to finish the dvd. Did a quick check and could not seem to find it.
I meant finalize. I have no idea why I have so great luck with it as I don't know the difference between this and the other programs. But either way, it worked for me.
Re: Swiss Nightly Build
Posted: Sun Apr 27, 2014 3:01 pm
by brooksyx
Okay, gotcha. Looks like that is checked by default.
I just hate wasting discs because these things are like 50 cents or more. That adds up pretty quick when you have a bunch of bad burns.
Re: Swiss Nightly Build
Posted: Thu May 01, 2014 9:14 pm
by Megacubo
Swiss option to emulate a memory card with sd is totally broke, right? I tried a lot of games and all fail when create save
Re: Swiss Nightly Build
Posted: Thu May 01, 2014 9:29 pm
by szczuru
Megacubo wrote:Swiss option to emulate a memory card with sd is totally broke, right? I tried a lot of games and all fail when create save
It's already mentioned. Emu_kidid know that.
Re: Swiss Nightly Build
Posted: Fri May 02, 2014 2:19 pm
by Megacubo
Thanks for the answer szczuru. With swiss 0.3 (r174) works ok
Re: Swiss Nightly Build
Posted: Sat May 03, 2014 8:12 am
by ALSINJAN
I'm using "Swiss-GC" on Wii (Wii Swiss Booter in HBC + SD Gecko) for years and am very happy with it, but I always find the same problem: Erratic boot (black screen until the third or fourth attempt).
Use also Nintendont and always starts on the first try.
Probably the problem is "Wii Swiss Booter" ...
Is there any way to improve this?
Thanks in advance.
Re: Swiss Nightly Build
Posted: Sat May 03, 2014 9:26 am
by iamdablasta
ALSINJAN wrote:I'm using "Swiss-GC" on Wii (Wii Swiss Booter in HBC + SD Gecko) for years and am very happy with it, but I always find the same problem: Erratic boot (black screen until the third or fourth attempt).
Use also Nintendont and always starts on the first try.
Probably the problem is "Wii Swiss Booter" ...
Is there any way to improve this?
Thanks in advance.
Have you tried loading the dol with something like loadmii?
Most likely it is the wii swiss booter.