Page 26 of 33

Re: Swiss Nightly Build

Posted: Wed Jul 20, 2016 11:27 am
by emu_kidid
r369 is up and should fix SD issues introduced earlier in r36X versions - it should also fix F-Zero GX.

Re: Swiss Nightly Build

Posted: Wed Jul 20, 2016 4:39 pm
by TALANTO
I have 15 old version downloaded from here (I may have even more on the older pc). If needed I can help for old versions archive. r256 is the oldest.
emu_kidid wrote:r369 is up and should fix SD issues introduced earlier in r36X versions - it should also fix F-Zero GX.
Fast check, I may miss something:
Wario World video forcing - worked ok;
Freezing at "Checking game" - seems fixed;
Kirby Air Ride - freezes on title screen when press Start;
Swapped red/blue colours - not fixed;
Glitched Soul Calibur graphics - not fixed.

Re: Swiss Nightly Build

Posted: Wed Jul 20, 2016 11:40 pm
by emu_kidid
TALANTO wrote:I have 15 old version downloaded from here (I may have even more on the older pc). If needed I can help for old versions archive. r256 is the oldest.
emu_kidid wrote:r369 is up and should fix SD issues introduced earlier in r36X versions - it should also fix F-Zero GX.
Fast check, I may miss something:
Wario World video forcing - worked ok;
Freezing at "Checking game" - seems fixed;
Kirby Air Ride - freezes on title screen when press Start;
Swapped red/blue colours - not fixed;
Glitched Soul Calibur graphics - not fixed.
I didn't attempt to fix those things so it's not worth testing them.

Re: Swiss Nightly Build

Posted: Sat Jul 23, 2016 6:28 pm
by boktai1000
TALANTO wrote:I have 15 old version downloaded from here (I may have even more on the older pc). If needed I can help for old versions archive. r256 is the oldest.
emu_kidid wrote:r369 is up and should fix SD issues introduced earlier in r36X versions - it should also fix F-Zero GX.
Fast check, I may miss something:
Wario World video forcing - worked ok;
Freezing at "Checking game" - seems fixed;
Kirby Air Ride - freezes on title screen when press Start;
Swapped red/blue colours - not fixed;
Glitched Soul Calibur graphics - not fixed.
Please mirror them if possible - thanks!

Re: Swiss Nightly Build

Posted: Wed Jul 27, 2016 9:03 am
by TALANTO
The offer was for emu_kidid only.

Re: Swiss Nightly Build

Posted: Wed Jul 27, 2016 9:06 am
by emu_kidid
TALANTO wrote:The offer was for emu_kidid only.
Thanks but I can rebuild old versions

Re: Swiss Nightly Build

Posted: Wed Aug 17, 2016 5:10 am
by jaycomma
Hi there. I'm trying to run Yu Gi Oh Falsebound Kingdom at 480p through swiss. I burned swiss to a MiniDVD and am switching the discs out. I am currently running version 0.1 of swiss, and every time I try to launch the game the graphics are terrible and the audio lags. I have my TV in 4:3 and it's a new flat screen. I have the component cables. I am reading on the compatibility list for forced 480p that falsebound kingdom works with r214, but I don't know how to compile the bootldr.dol for r214, nor do I really know how to create the ISO again for another MiniDVD with r214.. can someone help me?

Re: Swiss Nightly Build

Posted: Wed Aug 17, 2016 8:22 am
by emu_kidid
The ISO for Swiss is provided in every Nightly Build, just take it and put it onto a disc.

Re: Swiss Nightly Build

Posted: Mon Sep 12, 2016 2:15 am
by Polog
Hallo. I am in need of help. I a have a spare memory card and I was planning to use it for swiss. However, I am having a difficult time converting the compressed .dol version of swiss into a .gci file. For some reason dol2gci is not working on my computer. My plan was to use an exploit method (like Homebros) to boot swiss (I currently do not have an sd gecko or sd gc memory card). I only plan to use swiss to force 480p some my gamecube games. I would really like a .gci file of swiss, can someone help me obtain it?

Re: Swiss Nightly Build

Posted: Mon Sep 12, 2016 2:59 am
by emu_kidid
Next build will have a .gci included if you can wait 8hrs or so.

Re: Swiss Nightly Build

Posted: Mon Sep 12, 2016 2:22 pm
by Polog
Okay. Sounds good. Thank you!

Re: Swiss Nightly Build

Posted: Tue Sep 13, 2016 1:10 pm
by emu_kidid
Polog wrote:Okay. Sounds good. Thank you!
Sorry about the delay, the latest build has been uploaded and now contains a GCI version.

Re: Swiss Nightly Build

Posted: Tue Sep 13, 2016 11:27 pm
by Polog
Wow. Thank you! Swiss works great on my GameCube. I was trying out the force 480p feature and I am impressed. It worked well on all of my 480i only games, but except one. I think someone should put it on the force 480p compatibility list, Batman Vengeance does not force 480p it just goes back to 480i. Other than that, I am satisfied with the results.

Re: Swiss Nightly Build

Posted: Mon Sep 26, 2016 4:47 am
by emu_kidid
From this point on new releases will be available via: https://github.com/emukidid/swiss-gc/releases

Re: Swiss Nightly Build

Posted: Mon Oct 10, 2016 7:28 pm
by boktai1000
Been away from SWISS for a few months and just wanted to chime in and say thank you for the new releases and move over to Github! I'll have to update my SDcard this week and test everything out. Thanks a bunch emu_kidid, and keep up the great work!

Re: Swiss Nightly Build

Posted: Tue Oct 11, 2016 10:20 pm
by Ikthias
I'm having issues with Swiss r374-377, the compressed builds will not run after i flash them to my Qoob Pro. The latest build to boot off my Qoob is r372, which except for some new compatibility issues (Will post in the compatibility thread with more details) runs fine.

Re: Swiss Nightly Build

Posted: Wed Oct 12, 2016 2:38 am
by emu_kidid
Ikthias wrote:I'm having issues with Swiss r374-377, the compressed builds will not run after i flash them to my Qoob Pro. The latest build to boot off my Qoob is r372, which except for some new compatibility issues (Will post in the compatibility thread with more details) runs fine.
I'll have a look at what's up.

Re: Swiss Nightly Build

Posted: Wed Oct 12, 2016 4:56 am
by whyat
Since a wode can only autoboot via sd, is it possible to use sd and usb with swiss on wode? I haven't installed my wode yet and probably won't until December when I have free time, until then I just want to make the preperations.

Re: Swiss Nightly Build

Posted: Wed Oct 12, 2016 7:26 am
by emu_kidid
whyat wrote:Since a wode can only autoboot via sd, is it possible to use sd and usb with swiss on wode? I haven't installed my wode yet and probably won't until December when I have free time, until then I just want to make the preperations.
Yes

Re: Swiss Nightly Build

Posted: Wed Oct 12, 2016 8:35 am
by theclaw
Is there a quick dol loader for Qoob Pro? Something that gets flashed once, then searches for Swiss on an SDgecko on its own?
Makes for less dealing with the finicky USB.

Re: Swiss Nightly Build

Posted: Wed Oct 12, 2016 2:13 pm
by whyat
emu_kidid wrote:
whyat wrote:Since a wode can only autoboot via sd, is it possible to use sd and usb with swiss on wode? I haven't installed my wode yet and probably won't until December when I have free time, until then I just want to make the preperations.
Yes
At the same time, thats awesome. I could have a 2gb sd card for swiss and a big usb drive for everything else.

Re: Swiss Nightly Build

Posted: Sun Oct 16, 2016 8:37 pm
by whyat
So after some tests, I have swiss setup as initial iso. I was wondering if there was a way around using the wode screen and toggle switch to navigate a usb hdd filled with games and use swiss to do it much like swiss on a wasp fusion navigating its sd card. Any ideas?

Re: Swiss Nightly Build

Posted: Tue Oct 18, 2016 8:07 am
by andzlay
Nice to read that you solved your WODE problems, @whyat.
Are you sure, that's a good solution for your setup? If I understood correctly you have the majority of games on your USB drive and only swiss on the (wode) SD card. Wouldn't it be better to select all the games with your GC controller? And then only use the wode-screen-hardware-buttons to navigate the minority of stuff you have on your 2gb SD card. May I ask, what you're planning to put on your sd?
I also wondered: Is swiss displaying the content of the USB drive and the sd card together, or is there some sort of device selection inside swiss? I only use a SD inside the wode, so I don't remember or know.

But Anyway:
To navigate anything with the WODE hardware controls, you have to eject the inserted ISO first. Since you have autoboot, you'll always have the swiss ISO booted up when you start your GC. I don't think it's possible to change anything about this without creating a custom firmware for the WODE.

Re: Swiss Nightly Build

Posted: Tue Oct 18, 2016 10:14 am
by emu_kidid
whyat wrote:So after some tests, I have swiss setup as initial iso. I was wondering if there was a way around using the wode screen and toggle switch to navigate a usb hdd filled with games and use swiss to do it much like swiss on a wasp fusion navigating its sd card. Any ideas?
Swiss can browse the wode, press Z on the device selection to show the wode then select it. Support isn't great though.

Re: Swiss Nightly Build

Posted: Tue Oct 18, 2016 5:17 pm
by whyat
@andzlay my whole point was to have swiss autoboot on a sd card and the wode screen hidden inside the case and have a USB drive holding my games. The setup if it can get it to work in an ideal manner would be i boot up my GameCube Swiss loads I press start boot into Swiss and be able to all my games on my USB drive at once and select the one I want. Emukidd is suggesting that this may be possible if I press z and I will test this later tonight. Currently I have only been able to load a game though Swiss by selecting it via wode screen and mounting the DVD icon in Swiss. This method wouldn't be ideal.