Submit Compatibility Issues Here

Discuss one of the most feature filled GameCube applications here :)
Cuddles
Posts: 32
Joined: Tue Apr 21, 2020 5:39 am

Re: Submit Compatibility Issues Here

Post by Cuddles » Fri May 01, 2020 8:09 am

Game Star Wars the Clone Wars
Region NTSC
Medium SD2SP2 confimed good dump by nkit CRC32: 8D24A2C1 Size: 1393510400 bytes (1328 MiB)
Swiss version Swiss v0.5r827

More of a bug. The game doesn't like 480i. Launching in 240p seemed to fix my issue.
Last edited by Cuddles on Sat May 02, 2020 10:31 pm, edited 2 times in total.
Cuddles
Posts: 32
Joined: Tue Apr 21, 2020 5:39 am

Re: Submit Compatibility Issues Here

Post by Cuddles » Sat May 02, 2020 10:28 pm

Game: Ikaruga
Region: NTSC
Medium SD2SP2 confirmed dump by nkit CRC32: B150985F Size: 214102016 bytes (204 MiB)
Swiss version Swiss v0.5r827

After starting the game the game seems to reset back to the title screen. Same ISO in dolphin works fine.
User avatar
Extrems
Posts: 973
Joined: Tue Aug 17, 2010 10:40 pm
Location: Québec, Canada
Contact:

Re: Submit Compatibility Issues Here

Post by Extrems » Sat May 02, 2020 10:44 pm

Ikaruga depends on streaming audio emulation.
Cuddles
Posts: 32
Joined: Tue Apr 21, 2020 5:39 am

Re: Submit Compatibility Issues Here

Post by Cuddles » Sat May 02, 2020 11:49 pm

Extrems wrote:
Sat May 02, 2020 10:44 pm
Ikaruga depends on streaming audio emulation.
Thanks its working now
CodyGC
Posts: 36
Joined: Fri Jun 17, 2016 12:40 am
Location: Canada

Re: Submit Compatibility Issues Here

Post by CodyGC » Thu May 21, 2020 8:23 pm

The X-Men - Next Dimension videos are freezing in the latest version of Swiss. Despite being a common problem, this is the only game that can freeze the game for that reason. At least for me.

I tried to start the game with the audio and reading options on and off. I didn't notice any differences.
sakax
Posts: 10
Joined: Sat Jun 06, 2020 11:27 am

Re: Submit Compatibility Issues Here

Post by sakax » Tue Jun 09, 2020 8:55 am

I tried my full catalog of PAL games with latest swiss and I am having video output issues with Pikmin 2 PAL and Metroid Prime 2 Echoes PAL. Can someone confirm this?
User avatar
Papy.G
Posts: 478
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie
Contact:

Re: Submit Compatibility Issues Here

Post by Papy.G » Tue Jun 09, 2020 6:28 pm

Problems have been reported recently with a Metroïd, and further investigations eventually showed that the file was just damaged on the media, do you have a mean to re-dump or check your ISOs?
Did you try to run them in their native video mode? (IE not forcing 480lines if a game isn't PAL-60 compatible at first)

I had a question, is NKit .GCZ ISOs supposed to be launched from SWISS, they just doesn't show in the file browser.
DMG/MF OC, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
sakax
Posts: 10
Joined: Sat Jun 06, 2020 11:27 am

Re: Submit Compatibility Issues Here

Post by sakax » Tue Jun 09, 2020 9:25 pm

Papy.G wrote:
Tue Jun 09, 2020 6:28 pm
Problems have been reported recently with a Metroïd, and further investigations eventually showed that the file was just damaged on the media, do you have a mean to re-dump or check your ISOs?
Did you try to run them in their native video mode? (IE not forcing 480lines if a game isn't PAL-60 compatible at first)
Hi Papy.G

The people on #gc-forever clarified my issue. Metroid Prime 2 Echoes PAL only supports 60Hz.
The issue of Pikmin 1 black screening with swiss.dol used as igr.dol is reproducable on my end. Do you face the same issue?
Papy.G wrote:
Tue Jun 09, 2020 6:28 pm
I had a question, is NKit .GCZ ISOs supposed to be launched from SWISS, they just doesn't show in the file browser.
These are shrinked images, are these supported by swiss? I think you are supposed to unshrink these first... Never looked into it honestly.
CodyGC
Posts: 36
Joined: Fri Jun 17, 2016 12:40 am
Location: Canada

Re: Submit Compatibility Issues Here

Post by CodyGC » Tue Aug 04, 2020 9:36 pm

Hi, I tested version 870 and many problems have been fixed. Unfortunately, X-Men - Next Dimension still suffers from the problems related to videos. I also did not notice improvement in the introduction video of Megaman - Network Transmission.
User avatar
Diego borella
Posts: 128
Joined: Sat Jan 11, 2020 8:37 pm
Location: Brazil

Re: Submit Compatibility Issues Here

Post by Diego borella » Tue Aug 04, 2020 10:46 pm

sakax wrote:
Tue Jun 09, 2020 9:25 pm

do the following to force the PAL 50
configure 480i in both global and game settings.
for me, push the PAL 50.
keep the default rest and set the reading speed.
disable ipl startup for this operation.
User avatar
Papy.G
Posts: 478
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie
Contact:

Re: Submit Compatibility Issues Here

Post by Papy.G » Wed Aug 05, 2020 7:29 am

Papy.G wrote:
Tue Feb 18, 2020 3:30 pm
Papy.G wrote:
Wed Jan 22, 2020 9:56 pm
I recently used MKDD off the SD to see the intro videos lag, but can't say if it did in the past because I mainly use it off the original disc, and very often watch the intro anyways.
As of r785, it still lags when playing off an SD, in the intro, and sometimes in-game (2player versus championship), no such problem with the Original disc (PAL) even started from SWISS.
OMG how the r870 improved on that! :o 8-)

Edit: Wonder how accurate can the temperature displlay be, when from storage to SWISS ready, my Black set gives 34°C and both the Indigo and Silver ones say 54°C…
DMG/MF OC, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
User avatar
Diego borella
Posts: 128
Joined: Sat Jan 11, 2020 8:37 pm
Location: Brazil

Re: Submit Compatibility Issues Here

Post by Diego borella » Wed Aug 05, 2020 8:39 pm

Papy.G wrote:
Wed Aug 05, 2020 7:29 am


OMG how the r870 improved on that! :o 8-)


Edit: Wonder how accurate can the temperature displlay be, when from storage to SWISS ready, my Black set gives 34°C and both the Indigo and Silver ones say 54°C…




really now you can say that there is high speed!


games that previously had hiccups in CGIs are now running smoothly. :mrgreen:
the reading speed of the game list was wonderful.
and the unavailability of SP2 in some games, like Batman Vengeance, Medal of Honor, which only worked with the gecko, now runs on SP2 without problems for me ...
a scary leap in that year 2020. :D


for me my BGA is always at 65º to 70º
I changed and cleaned the entire hub,
how much temperature would be ideal? :?:
User avatar
Extrems
Posts: 973
Joined: Tue Aug 17, 2010 10:40 pm
Location: Québec, Canada
Contact:

Re: Submit Compatibility Issues Here

Post by Extrems » Wed Aug 05, 2020 8:46 pm

38-42°C is the normal idle temperature on the systems used to calibrate the thermal assist unit.
User avatar
Papy.G
Posts: 478
Joined: Mon Mar 04, 2019 6:14 am
Location: France, Occitanie
Contact:

Re: Submit Compatibility Issues Here

Post by Papy.G » Thu Aug 06, 2020 5:31 am

Is it expected to have to be calibrated for specific units?
How can we do/help with that?
DMG/MF OC, AGB/SC miniSD, NTR/NeoMK3, USG/flashme V8/SC miniSD
DOL001(EUR)/RGB/GCPlug/GBP/SD2SP2, RVL 001(EUR)/RGB/CMP/WiiSD

Zelda WW with Tingle Tuner in split screen was what the GC RF modulator was made for! (Video)
vinzanity
Posts: 23
Joined: Tue Jun 04, 2013 5:35 am

Re: Submit Compatibility Issues Here

Post by vinzanity » Sat Aug 08, 2020 8:34 am

I'd love to be a contributor to the compatibility list.
User avatar
Extrems
Posts: 973
Joined: Tue Aug 17, 2010 10:40 pm
Location: Québec, Canada
Contact:

Re: Submit Compatibility Issues Here

Post by Extrems » Sat Aug 08, 2020 1:25 pm

Then... do it? Anyone can register and edit.
Post Reply