After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Discuss one of the most feature filled GameCube applications here :)
Post Reply
YzakLaw
Posts: 5
Joined: Sun Aug 25, 2019 3:14 pm

After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by YzakLaw » Sun Aug 25, 2019 3:23 pm

I upgraded swiss_r650 under the swiss_R451 menu by swiss_r650.fzn. After I shut down and restart, I will display a black screen when I insert the SD card.
User avatar
emu_kidid
Site Admin
Posts: 4533
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by emu_kidid » Sun Aug 25, 2019 10:57 pm

At what point are you seeing the black screen, immediately on power on?

There's a recovery option whereby you need to write a recovery image raw to a SD card and insert that into the WKF/WASP SD slot. From there you'll need to make a WBFS SD card with a Swiss.iso on there and then finally flash another .fzn file from within Swiss (lots of SD card swapping).
Image
YzakLaw
Posts: 5
Joined: Sun Aug 25, 2019 3:14 pm

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by YzakLaw » Mon Aug 26, 2019 4:26 am

Yes, I saw a black screen immediately after startup.
I made the swiss_r650_Recovery card. When I started, I could see NGC LOGO, but I stopped at LOGO.
I also tried to change the WBFS SD card with Swiss.iso immediately after the logo appeared, but I still stay at NGC LOGO.
User avatar
emu_kidid
Site Admin
Posts: 4533
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by emu_kidid » Mon Aug 26, 2019 5:59 am

Can you try an older recovery? I'll try r650 when I get some time later today on my WKF GC.
Image
YzakLaw
Posts: 5
Joined: Sun Aug 25, 2019 3:14 pm

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by YzakLaw » Mon Aug 26, 2019 6:18 am

I tried it with R451.
First, I use DD to write swiss_r451_Recovery.iso, called DISC A.
Then, write swiss_r451(ntsc-j).iso with WBFS Manger4.0, called DISC B

For the first time, I put in DISC A, inserted DISC B after the end of NGC LOGO, stayed at LOGO, no response
The second time, I put it into DISC A. After the LOGO appears, I press A, enter the NGC menu, and then put it into DISC B. The display is always "?" and the prompt is being read.
User avatar
emu_kidid
Site Admin
Posts: 4533
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by emu_kidid » Tue Aug 27, 2019 1:25 am

can you put Swiss r450 or r451.fzn on?
Image
YzakLaw
Posts: 5
Joined: Sun Aug 25, 2019 3:14 pm

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by YzakLaw » Tue Aug 27, 2019 3:31 am

The TV showed black screen when the WASP Fusion was loading "swiss_r650(ntsc-j).iso", and then, If I change the image to "swiss_r650_Recovery.iso" of SD Card,the screen wiil show the attachment. I couldn't see the SWISS menu at next step.
微信图片_20190827112648.jpg
(128.89 KiB) Not downloaded yet
YzakLaw
Posts: 5
Joined: Sun Aug 25, 2019 3:14 pm

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by YzakLaw » Thu Aug 29, 2019 4:00 pm

Can you elaborate on the recovery process?
My operation is, 1. Insert the SD card of swiss_r650_Recovery written in DD into the WKF card slot, 2. Open NGC When the picture above appears, insert the SD card with SWISS.ISO WBFS.
User avatar
emu_kidid
Site Admin
Posts: 4533
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: After swiss_r650 is upgraded by swiss_r650.fzn, insert the SD card black screen.

Post by emu_kidid » Fri Aug 30, 2019 1:16 am

I'm not too familiar with it as I've never had to do it but there are threads on this forum where it has been detailed many years ago, have a search to find one such thread. I believe the recovery ISO when written raw is meant to boot up to the original WBFS Wiikey Fusion menu after a reboot. The steps you detail after seem correct to me.
Image
Post Reply