getting autoboot nowdays wkf

Discuss one of the most feature filled GameCube applications here :)
Post Reply
User avatar
aleomark
Posts: 36
Joined: Wed Feb 23, 2011 3:20 pm

getting autoboot nowdays wkf

Post by aleomark » Sun May 03, 2020 6:12 am

hi guys, one question, from wkf 1.5 I did install Swiss auto-boot as initial iso from original WKF (or at least I tough that)

1-load wkf firmware and then I loaded swiss_r827.iso from wbsf sd card.
2-from there I booted sd gecko with an sd fat 32 with Swiss_r827.fzn and .fzn.fw and flashed.

Now, when I turn on my gamecube the menu appears and in game play shows Swiss ready to press start to begin, but it isn't direct loading with just turn on the gamecube.
Did I miss something? (English is not my first language so is possible I missed a thing) thanks
User avatar
emu_kidid
Site Admin
Posts: 4682
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: getting autoboot nowdays wkf

Post by emu_kidid » Mon May 04, 2020 11:22 pm

No you didn't miss anything. With the WKF it's hit or miss as to whether or not it will autoboot. Some people had to try 10-15 different SD cards until they found one it was happy to autoboot with.
Image
User avatar
aleomark
Posts: 36
Joined: Wed Feb 23, 2011 3:20 pm

Re: getting autoboot nowdays wkf

Post by aleomark » Tue May 05, 2020 2:24 am

ok, thanks!
rafer_22
Posts: 9
Joined: Sat Sep 26, 2015 2:31 am

Re: getting autoboot nowdays wkf

Post by rafer_22 » Sun Jun 28, 2020 12:55 am

Conecta el pin 12 del GameCube a GND y Swiss se cargará de forma automática
SkydivinGirl
Posts: 27
Joined: Sun Sep 15, 2019 3:42 pm

Re: getting autoboot nowdays wkf

Post by SkydivinGirl » Tue Jul 07, 2020 2:59 pm

I use the following cards and they work perfectly with Autoboot on the WiiKey Fusion.

https://www.amazon.com/gp/product/B07SFZP6TD

Heather
andre104623
Posts: 671
Joined: Wed May 07, 2014 2:24 pm

Re: getting autoboot nowdays wkf

Post by andre104623 » Mon Aug 03, 2020 7:50 am

I already fixed this issue years ago just ground out the GC side of the Lid connector and every SD card will autoboot
andre104623
Posts: 671
Joined: Wed May 07, 2014 2:24 pm

Re: getting autoboot nowdays wkf

Post by andre104623 » Mon Aug 03, 2020 8:15 am

I never removed this mod but I found out that adding a switch was a good idea for muti-disc games so it still works to this day also this breaks the 64gb limit on the wasp fusion I found out years later I use an 128gb sandisk SD card in my Wasp works fine and it is because of this mod if I switch it off it will not read anymore. Also higher SD card would work to 128gb is the biggest i have so if someone could test that I would be greatful
Post Reply