Hi,
I have a QOOB Pro with Swiss as an application on the modchip.
I can't remeber flashing to the chip, as it was such a long time ago that I did it, but I must have done this as it is on these.
The Swiss version is quite old, and I would like to update it to a newer version in order to get SD2SP2 support.
My question is how can I update this old version of Swiss to the latest version?
Do I need to pull apart my Gamecube and hook the QOOB Pro to my PC? Is there an easier way?
Thank you kindly
Updating Swiss version on QOOB Pro
-
fishsticks
- Posts: 1
- Joined: Wed Nov 11, 2020 5:44 am
Re: Updating Swiss version on QOOB Pro
I think I'll never forget that...
1 - Look for the USB input below the GameCube and connect to the PC.
2 - Use Flashing Software 1.3 ( viewtopic.php?f=36&t=23 ) and update Swiss.
If you often get that message about checking the cables, you can try swapping the BIOS for 1.3b4 which is also on the link. It did not solve but now it happens rarely for me.
1 - Look for the USB input below the GameCube and connect to the PC.
2 - Use Flashing Software 1.3 ( viewtopic.php?f=36&t=23 ) and update Swiss.
If you often get that message about checking the cables, you can try swapping the BIOS for 1.3b4 which is also on the link. It did not solve but now it happens rarely for me.