gc-forever - Gamecube/Wii Forums

Hi guys,
I just downloaded Swiss v0.5r963 and trying out the memoery card emulation but not sure if I configured it correctly because whenever I launch a game I get card is corrupted and need to be formatted.
I am running a PAL GC with gc loader on latest FW and an SD2SP with a 2GB SD card. Swiss runs from boot.iso on the gcloader.
All the games are on a 128GB SD in gcloader and on the SD2SP i jus thave igr.dol for the reset.

Do I have something misconfigured or the functionality is too new and it is hit and miss?

Format it.

I had the same issue. Thanks for the reply. Now I see its posible to mount virtual MC and see it on the GC menu. How do I mount the memory Card?

Use boot through IPL.

i have the "Boot through IPL" enabled (I see the GC boot screen when I start the console or after starting a game), but GC menu says I dont have any MC on both slots. If I plug a MC on slot B it says B has a MC, but not on A. Im using a SD2SP2 with a 8GB card

You must start a game using it, and then hold the A button to cancel boot.

Works perfect. Now I can copy all my PSO Quest to the virtual MC (almost 300 blocks on 2 251 cards) Thank you so much.

Extrems wrote: ↑

Fri Nov 20, 2020 7:52 pm

Format it.

I did but then powered off the GC, loaded another game and corrupted again.

sd_dracula, if you're using a SD bigger than 2GB format It on exfat with 32Kb cluster.

sd_dracula wrote: ↑

Fri Nov 20, 2020 9:54 pm

I did but then powered off the GC, loaded another game and corrupted again.

You have a set of memory cards per game region. Were they the same?

There is a chance one game was PAL and one NTSC, let me try it again.
And the card in the sd2sp2 is 2gb

Yup that was it thanks, I loaded pal then ntsc so had to format twice and I assumed I formatted same cards
Let's hope the wireless controller issue gets fixed next