Page 1 of 1
Video force not working when I enable iplboot on swiss.
Posted: Tue Dec 29, 2020 2:45 am
by JPnintendo
Hi people! I have a little problem with swiss. I have a NTSC DOL 001 Gamecube. It has installed Qoob SX with IPLboot and start Swiss from Gecko on memory card slot B.
When I force PAL games to NTSC it works perfectly. But when I enable the option "Boot with IPL" and then I start the game video forcing doesn't work and the game starts in PAL mode (Starts the IPL and then the game both in PAL) and with distorted colors. If I turn off the IPL boot option video force works again and can play the game correctly.
Any idea? Is this a bug in swiss? I am using rev990.
Re: Video force not working when I enable iplboot on swiss.
Posted: Tue Dec 29, 2020 3:33 am
by Extrems
It is working, just not as you're expecting. This is a current limitation with PAL games.
Re: Video force not working when I enable iplboot on swiss.
Posted: Tue Dec 29, 2020 6:46 pm
by JPnintendo
Extrems wrote: ↑Tue Dec 29, 2020 3:33 am
It is working, just not as you're expecting. This is a current limitation with PAL games.
Thanks ! So, is there a way to get PAL games work with IPLboot with the colors showing properly? I mean, not forcing the video mode? All my TVs support all regions, but colors doesn't show correctly in GC PAL games even if I don't force video.
Re: Video force not working when I enable iplboot on swiss.
Posted: Tue Dec 29, 2020 8:20 pm
by Extrems
You can try your luck with setting AVE Compatibility to AVE N-DOL. This will output NTSC 50 instead of quasi-PAL-N.
Otherwise, you need to use component video.
Re: Video force not working when I enable iplboot on swiss.
Posted: Tue Dec 29, 2020 10:29 pm
by JPnintendo
Extrems wrote: ↑Tue Dec 29, 2020 8:20 pm
You can try your luck with setting AVE Compatibility to AVE N-DOL. This will output NTSC 50 instead of quasi-PAL-N.
Otherwise, you need to use component video.
Thanks I going to try and let you know the results !
Edit: Didn't work
Re: Video force not working when I enable iplboot on swiss.
Posted: Wed Dec 30, 2020 9:40 pm
by Diego borella
I came to the conclusion that IPL should be disabled for PAL games, cheats ...
"
in some cases"
The games will simply have colors changed.
because the result of forcing the
AVE-N-dol results in a change in the IPL.
I have 2 NGC: a dol 001, and a 101.
DOl 101, appears as "dol-001" from version 963.
and when I play an GCvideo. PAL, the game is in black and white.
it is as if my NGC has become a PAL when in a SWISS state.
there is a "hash" in it: Splinter Cell, (PAL) when forcing AVE-N-DOL, it simply enters the game menu, but when it goes to play, it hashes and the game returns to SWISS, as if it had a save explorer. With or without IGR, the hash is the same.