gc-forever - Gamecube/Wii Forums

I did a '"ide-exi/hdd" homemade soldered and I think something wrong, because I ended up burning the gateway to the memory card A and B and now it does not recognize anything.
the "memory slot A" is a fixed error and nothing recognizes the "memory slot B" gives error when you plug the card into the slot.
I noticed that the item is defective the photo (where I can find) to replace or some other option in order to operate the door of the memory card even provisionally.
could be defective components M5B / M5C

http://www21.atwiki.jp/mcmaster/m/pages ... ml?guid=on

DA5J109W / DA5J110V (new model) ?

then try to put photos of the actual errors on the screen ok (because the error happens in the menu on gamecube)

Photo 0 - gamecube menu (nothing plugged in)
Photo 1 - memory card A or B (no plugged) (error in Slot A)
Photo 2 - memory card plugged into slot A (slot error in A)
Photo 3 - memory card plugged into slot B (error in slot B)

item MO
http://www.electronica-pt.com/index.php ... ew/160/40/

this would be the component MO "diode" (new model) ?

http://pdf1.alldatasheet.com/datasheet- ... 2WAT1.html
or
http://pdf1.alldatasheet.com/datasheet- ... 2WAT1.html


which the voltage of these items ?

http://img99.imageshack.us/img99/2295/f33f4839.jpg

Please !