Page 1 of 1

Gamecube damaged

Posted: Thu Nov 08, 2012 7:18 pm
by Gaara4
New Question on the bottom

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 7:24 pm
by liquitt
your urls do not work. use the [.url]...[./url]

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 7:43 pm
by Gaara4
Ok fix the picture problem and Sry for my Bad english i Come from Germay.

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 8:04 pm
by andzlay
Never heard of.

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 8:06 pm
by liquitt
Germay? Man, i thought Germany was weird...

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 8:10 pm
by Gaara4
Ok :lol:

Can anyone helpe me?

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 9:04 pm
by megalomaniac
The description says it runs on 12v...just connect it to the 12v output of the main power switch

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 9:11 pm
by Gaara4
Ok
I thinking that the Black Kabel is for the ground and the red for the Voltage :lol:

Ok sould i try ist with 5v First or direktly with 12v

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 9:15 pm
by liquitt
is this your first soldering/electronics job?

Re: Screen on Gamecube

Posted: Thu Nov 08, 2012 10:55 pm
by emu_kidid
If it says 12V, then use 12V. I've connected one of these to a GameCube and it works fine.

Re: Screen on Gamecube

Posted: Fri Nov 09, 2012 12:00 am
by infact
I have the same screen. Just use 12v red is VCC and black is GND.
Be careful to not blow the fuse which is sensitive to crappy connections. (happended the second time i plugged it in :D)

Ashen did also use this screen for one of his portables.

Image

Re: Screen on Gamecube

Posted: Fri Nov 09, 2012 3:43 pm
by Gaara4
Ok first thank you.

But now i have a other Problem. This is my Second Gamecube and everytime After a few Day (2days) they dont want to Start only the Fan. Why is it I've soldered anything looks just so always goes Damage?

Re: Gamecube damaged

Posted: Sat Nov 10, 2012 1:34 pm
by emu_kidid
Unplug everything from the cube like bba etc

Re: Gamecube damaged

Posted: Sat Nov 10, 2012 2:03 pm
by megalomaniac
since the monitor requires 12v, why not use a 12v ac/dc wall adapter??

Re: Gamecube damaged

Posted: Sat Nov 10, 2012 4:30 pm
by Gaara4
I habe unplug everthing and the Screen work now.