DOL-001 Power Switch on a DOL-101 Fan Assembly , works ok ?

Portables, case replacements, mods etc, all in here!
Post Reply
User avatar
s8n187
Posts: 87
Joined: Fri May 07, 2010 11:45 am

DOL-001 Power Switch on a DOL-101 Fan Assembly , works ok ?

Post by s8n187 » Thu Sep 09, 2010 4:51 am

hi GC scene and emu_kidid , i was wondering if i can put a DOL-001 Power Switch on a DOL-101 Fan Assembly and it fit and run ok without problems. I will remove the DOL-101 Power Switch first then add the 001 Switch.


any tips help

s8n
User avatar
emu_kidid
Site Admin
Posts: 4507
Joined: Mon Mar 29, 2010 10:06 am
Location: Australia
Contact:

Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o

Post by emu_kidid » Thu Sep 09, 2010 4:58 am

just the switch itself? should work/fit fine.

Don't know about the whole assembly though, I recall there being differences in shape.
Image
r3ap3r
Posts: 11
Joined: Fri Sep 03, 2010 3:01 pm

Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o

Post by r3ap3r » Thu Sep 09, 2010 6:09 am

I just took apart a Silver DOL-101 and the whole fan assembly is the same as the Black, Indigo DOL-001 i have.
gtmtnbiker
Posts: 163
Joined: Fri Apr 09, 2010 4:30 pm

Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o

Post by gtmtnbiker » Thu Sep 09, 2010 11:14 am

Why are you replacing the switch? Is it because it's defective?
r3ap3r
Posts: 11
Joined: Fri Sep 03, 2010 3:01 pm

Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o

Post by r3ap3r » Thu Sep 09, 2010 11:54 am

gtmtnbiker wrote:Why are you replacing the switch? Is it because it's defective?
There could be multiple reasons, eg. The fan died, power button broke, power plug loose, or just wants to use a newer component (DOL 101 is newer than DOL 001 and therefore may be better quality from the older one).
Post Reply