Page 1 of 1
DOL-001 Power Switch on a DOL-101 Fan Assembly , works ok ?
Posted: Thu Sep 09, 2010 4:51 am
by s8n187
hi GC scene and emu_kidid , i was wondering if i can put a DOL-001 Power Switch on a DOL-101 Fan Assembly and it fit and run ok without problems. I will remove the DOL-101 Power Switch first then add the 001 Switch.
any tips help
s8n
Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o
Posted: Thu Sep 09, 2010 4:58 am
by emu_kidid
just the switch itself? should work/fit fine.
Don't know about the whole assembly though, I recall there being differences in shape.
Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o
Posted: Thu Sep 09, 2010 6:09 am
by r3ap3r
I just took apart a Silver DOL-101 and the whole fan assembly is the same as the Black, Indigo DOL-001 i have.
Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o
Posted: Thu Sep 09, 2010 11:14 am
by gtmtnbiker
Why are you replacing the switch? Is it because it's defective?
Re: DOL-001 Power Switch on a DOL-101 Fan Assembly , works o
Posted: Thu Sep 09, 2010 11:54 am
by r3ap3r
gtmtnbiker wrote:Why are you replacing the switch? Is it because it's defective?
There could be multiple reasons, eg. The fan died, power button broke, power plug loose, or just wants to use a newer component (DOL 101 is newer than DOL 001 and therefore may be better quality from the older one).