DVD port connector pinout's
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
DVD port connector pinout's
I removed a male DVD port connector from a DVD board. I have a few ideas for what I want to do with it but I need the pinout's before I do anything yet.
Red arrow points to the memory card slot
Red arrow points to the memory card slot
Re: DVD port connector pinout's
It's mentioned in the YAGCD: http://www.gc-forever.com/yagcd/chap2.html#sec2.4.1
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: DVD port connector pinout's
Thank you but were does pin 1 start and pin 32 end?
Re: DVD port connector pinout's
As written on the drive board. Also I think the connector is symmetric.
Edit : woops I accidentally mirrored it. Fixed.
By the way, isn't there a way to set the image width in bbcode ? It's kind of annoying.
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: DVD port connector pinout's
Thank you very much. Yeah I forgot to look at the drive board sorry bout that
Re: DVD port connector pinout's
You welcome. Out of curiosity what do you plan to do with it ?
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: DVD port connector pinout's
I'm not sure yet but I was going to try have a WASP and DVD together without a megadrive v4. But really it's all up in my head still and I won't get to it till the fall or later. I have a lot of other things on my todo listStreetwalker wrote:You welcome. Out of curiosity what do you plan to do with it ?
Re: DVD port connector pinout's
So, it IS possible to have Wasp and DVD togheter without a megadrive v4....
I's like to try that, as I've been doing a similar mod for my Dreamcast, the difference being that I'm installing a HDD on the DC.
Is there any guide to do this mod on the GC without the Megadrive V4?
I's like to try that, as I've been doing a similar mod for my Dreamcast, the difference being that I'm installing a HDD on the DC.
Is there any guide to do this mod on the GC without the Megadrive V4?
-
- Posts: 694
- Joined: Wed May 07, 2014 2:24 pm
Re: DVD port connector pinout's
Oh yeah its possible. People have done it before like way before the megadrive v4 BUT I don't like messes of wires ( Known as wireporn ) so I really need to give this project some thought. Maybe need to design my own PCB to house the connector which if I do it will be the first time I design a PCB.Sugurain wrote:So, it IS possible to have Wasp and DVD togheter without a megadrive v4....
I's like to try that, as I've been doing a similar mod for my Dreamcast, the difference being that I'm installing a HDD on the DC.
Is there any guide to do this mod on the GC without the Megadrive V4?
Re: DVD port connector pinout's
Thankfully it's not really hard. I designed a simple pcb for the first time in about an afternoon. If you're going to connect to a GC board you'll need to create your own footprints though (I was lucky enough to use only components that were already available in eagle's database).
Re: DVD port connector pinout's
Oh, I see.
I didn't know people had done it before. I'm really new to the Cube scene, and 100 dollars for an simple adapter is just too much for me...
(that's like 600 bucks here in my country, belive it or not)
I too, don't like the "wire porn" but oh well... not much else I can do. hahaha
I'd like something like a diagram, where each pin should go, and if it was not that impossible, I'd surely give it a try hahaha.
Not sure if my DOL-002 would be compatible with this though.
Gonna ask Megalomaniac once the board I sent him arrives. =)
I didn't know people had done it before. I'm really new to the Cube scene, and 100 dollars for an simple adapter is just too much for me...
(that's like 600 bucks here in my country, belive it or not)
I too, don't like the "wire porn" but oh well... not much else I can do. hahaha
I'd like something like a diagram, where each pin should go, and if it was not that impossible, I'd surely give it a try hahaha.
Not sure if my DOL-002 would be compatible with this though.
Gonna ask Megalomaniac once the board I sent him arrives. =)