Need help programming GCvideo on Shuriken Video v3

Portables, case replacements, mods etc, all in here!
Post Reply
chicken
Posts: 2
Joined: Fri Jun 10, 2016 3:26 pm

Need help programming GCvideo on Shuriken Video v3

Post by chicken » Mon Jun 13, 2016 6:00 pm

I am new to electronics, and am currently a little lost. If I say something stupid or incorrect, please let me know.

Since the Shuriken video site is down, I am not sure how to proceed. I currently have my USB Arduino board and my Shuriken video board. I know I need to connect CLK MOSI MISO SS GND, but since the site is down, I do not have a schematic or picture for reference. And after that, I have no idea what to do.

Any advice is greatly appreciated.
andre104623
Posts: 643
Joined: Wed May 07, 2014 2:24 pm

Re: Need help programming GCvideo on Shuriken Video v3

Post by andre104623 » Tue Jun 14, 2016 12:15 am

I have to file you need I will upload it when I get home to my main computer
User avatar
andzlay
Posts: 436
Joined: Thu Jul 08, 2010 12:53 am
Location: Germany

Re: Need help programming GCvideo on Shuriken Video v3

Post by andzlay » Tue Jun 14, 2016 6:51 am

Internet archive is your friend:
https://web.archive.org/web/20151120015 ... 0video.htm
Edit: seems like there are no pictures in the archived version of the site. Hope it helps anyway.
chicken
Posts: 2
Joined: Fri Jun 10, 2016 3:26 pm

Re: Need help programming GCvideo on Shuriken Video v3

Post by chicken » Tue Jun 14, 2016 5:40 pm

andzlay wrote:Internet archive is your friend:
https://web.archive.org/web/20151120015 ... 0video.htm
Edit: seems like there are no pictures in the archived version of the site. Hope it helps anyway.
Many thanks! The archived site mostly had broken links, BUT it had the schematic for the V1 board. Now I can at least wire the board correctly.
Post Reply