I have disassembled my GC to fix something and I removed the heatsink, will I have to reapply the paste stuff that's on it before reassembling?
Also, which paste is this. Thermal Paste or Epoxy?
Thanks
Reapplying heatsink Paste
-
- Posts: 1
- Joined: Sat Jun 10, 2017 7:55 pm
Re: Reapplying heatsink Paste
These are thermal pads, not thermal paste so you don't need to change them. You can just reapply the heatsink as is.
-
- Posts: 5
- Joined: Thu Apr 13, 2017 5:16 am
Re: Reapplying heatsink Paste
If you do replace them, get 2mm thick thermal pads. I have tried 3mm and it works, but i cant say if its any better then 2mm.