R5 & R6 Resistors for the region mod

Portables, case replacements, mods etc, all in here!
Post Reply
User avatar
SLG64
Posts: 2
Joined: Thu Feb 21, 2019 8:04 pm
Contact:

R5 & R6 Resistors for the region mod

Post by SLG64 » Thu Feb 21, 2019 8:15 pm

Hello, I'm new to this website and I have some questions regarding the region switch mod for an NTSC-U Gamecube DOL-001 model. I lost the resistor and was wondering if there is an alternative method to get the mod working or if there's someplace for me to get a replacement resistor? Is it an SMD 0 Ohm resistor? Thanks in advance. :)

Edit: I also wanted to add that it can still boot in NTSC-U with no resistors on R5 & R6.
count.zero
Posts: 24
Joined: Mon May 12, 2014 3:57 pm
Location: Italy

Re: R5 & R6 Resistors for the region mod

Post by count.zero » Thu Mar 07, 2019 11:42 am

Have a look here to see how it works:
https://www.gc-forever.com/wiki/index.p ... ion_Switch

You will realize that a 0 ohm resistor or simply some solder will do the trick.
User avatar
SLG64
Posts: 2
Joined: Thu Feb 21, 2019 8:04 pm
Contact:

Re: R5 & R6 Resistors for the region mod

Post by SLG64 » Mon Apr 01, 2019 6:40 pm

count.zero wrote:
Thu Mar 07, 2019 11:42 am
Have a look here to see how it works:
https://www.gc-forever.com/wiki/index.p ... ion_Switch

You will realize that a 0 ohm resistor or simply some solder will do the trick.
Ah, I understand now. Thank you! appologies if this question seemed dumb... I'm new when it comes to Gamecube modding. I'm trying to improve my knowledge with capacitors, resistors, etc. :lol:
Post Reply