Hello, I'm new to this website and I have some questions regarding the region switch mod for an NTSC-U Gamecube DOL-001 model. I lost the resistor and was wondering if there is an alternative method to get the mod working or if there's someplace for me to get a replacement resistor? Is it an SMD 0 Ohm resistor? Thanks in advance.
Edit: I also wanted to add that it can still boot in NTSC-U with no resistors on R5 & R6.
R5 & R6 Resistors for the region mod
-
- Posts: 36
- Joined: Mon May 12, 2014 3:57 pm
- Location: Italy
Re: R5 & R6 Resistors for the region mod
Have a look here to see how it works:
https://www.gc-forever.com/wiki/index.p ... ion_Switch
You will realize that a 0 ohm resistor or simply some solder will do the trick.
https://www.gc-forever.com/wiki/index.p ... ion_Switch
You will realize that a 0 ohm resistor or simply some solder will do the trick.
Re: R5 & R6 Resistors for the region mod
Ah, I understand now. Thank you! appologies if this question seemed dumb... I'm new when it comes to Gamecube modding. I'm trying to improve my knowledge with capacitors, resistors, etc.count.zero wrote: ↑Thu Mar 07, 2019 11:42 amHave a look here to see how it works:
https://www.gc-forever.com/wiki/index.p ... ion_Switch
You will realize that a 0 ohm resistor or simply some solder will do the trick.